Encapsulated Neutral Ruthenium Catalyst for Substrate-Selective Oxidation of Alcohols

The neutral complex dichloro-{diethyl[(5-phenyl-1,3,4-oxadiazol-2-ylamino)-(4-trifluoro-methylphenyl)methyl]phosphonate} (p-cymene)-ruthenium(II) was encapsulated inside a self-assembled hexameric host obtained upon reaction of 2,8,14,20-tetra-undecyl-resorcin[4]arene and water. The formation of an inclusion complex was inferred from a combination of spectral measurements (MS, UV/Vis spectroscopy, ¹H and DOSY NMR). The ³¹P and ¹⁹F NMR spectra are consistent with motions of the ruthenium complex inside the self-assembled capsule. Molecular dynamics simulations carried out on the inclusion complex confirmed these intra-cavity movements and highlighted possible supramolecular interactions between the ruthenium first coordination sphere ligands and the inner part (aromatic rings) of the capsule. The embedded ruthenium complex was assessed in the catalytic oxidation (using NaIO₄ as oxidant) of mixtures of three arylmethyl alcohols into the corresponding aldehydes. The reaction kinetics were shown to vary as a function of the substrates’ size, with the oxidation rate varying in the order benzylalcohol >4-phenyl-benzylalcohol >9-anthracenemethanol. Control experiments realized in the absence of hexameric capsule did not allow any discrimination between the substrates.     

Composite host lattices of 4,4′‐sulfonyldibenzoate water/boric acid in two tetrapropylammonium inclusion compounds

Two novel inclusion compounds of 4,4′‐sulfonyldibenzoate anions and tetrapropylammonium cations with different ancillary molecules of water and boric acid, namely bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate dihydrate, 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·H₂O ( 1 ), and bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate bis(boric acid), 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·2H₃BO₃ ( 2 ), were prepared and characterized using single‐crystal X‐ray diffraction. In the two salts, the host 4,4′‐sulfonyldibenzoic acid molecules, which are converted to the corresponding anions under basic conditions, can be regarded as proton acceptors which link different proton donors of the ancillary molecules of water or boric acid. In this way, an isolated hydrogen‐bonded tetramer is constructed in salt 1 and a ribbon is constructed in salt 2 . The tetramers and ribbons are then packed in a repeating manner to generate various host frameworks, and the tetrapropylammonium guest counter‐ions are contained in the cavities of the host lattices to give the final stable crystal structures. In these two salts, although the host anion and guest cation are the same, the difference in the ancillary small molecules results in different structures, indicating the significance of ancillary molecules in the formation of crystal structures.     

Ionic Conductivity of β‐Cyclodextrin–Polyethylene‐Oxide/Alkali‐Metal‐Salt Complex

Highly conductive, crystalline, polymer electrolytes, β‐cyclodextrin (β‐CD)–polyethylene oxide (PEO)/LiAsF₆ and β‐CD–PEO/NaAsF₆, were prepared through supramolecular self‐assembly of PEO, β‐CD, and LiAsF₆/NaAsF₆. The assembled β‐CDs form nanochannels in which the PEO/X⁺ (X=Li, Na) complexes are confined. The nanochannels provide a pathway for directional motion of the alkali metal ions and, at the same time, separate the cations and the anions by size exclusion.     

柚皮素/β-环糊精超分子体系的包合行为

本文采用超声法制备了柚皮素（NAR）与β-环糊精（βCD）的包合物.粉末-X射线衍射（XRD）和红外吸收光谱（IR）测定均表明形成的包合物具有不同于主客体的新的结构性质.¹H NMR与ROESY核磁共振（NMR）实验表明NAR以苯环端从βCD的宽口端进入，并形成稳定的超分子包合物.量子化学计算分析NAR/βCD包合物的形成过程表明，驱动力源于焓驱动与氢键弱相互作用力；能隙和结合能分析得到的最优包合模式与NMR研究结果一致；ONIOM分层计算验证了上述结果.分子对接模拟出的最优包合模式也与量子化学计算、NMR的分析结果吻合.本文获取了清晰的NAR/βCD包合物构型及其形成机理，为该超分子药物的定量构效关系研究提供了理论参考.     

Application of SSA thermal fractionation and X‐ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate‐ran‐butylene azelate) random copolymers

Poly(butylene succinate‐ran‐butylene azelate) random copolyesters were thermally fractionated by successive self‐nucleation and annealing (SSA). The samples before and after SSA were analyzed by differential scanning calorimetry (DSC) and X‐ray diffraction (WAXS and SAXS). WAXS results indicate that a small degree of comonomer inclusion is present in the crystalline phases that are formed in the copolymers depending on composition: a PBS‐like unit cell or/and a PBAz‐like unit cell, thus confirming the isodimorphic behavior of the samples. SSA on the other hand demonstrated that the degree of comonomer exclusion during crystallization is far larger than comonomer inclusion, as judged by the increase in fractionation degree with compositions leading to the pseudo‐eutectic point. Furthermore, WAXS, SAXS, and SSA results show that the isodimorphic behavior is not highly dependent on kinetic factors, as the degree of comonomer inclusion or exclusion in the samples was not significantly altered by SSA thermal fractionation, a thermal treatment that promotes annealing and molecular segregation of defects to the amorphous regions of the material. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2346–2358     

Banach空间中一类二阶具阻尼项的积分-微分包含的可控性

本文讨论了一类二阶具阻尼项的积分-微分包含问题.利用集值不动点定理将问题转化为求不动点问题,进而得到系统可控性的充分条件.     

Generalized immediate exchange models and their symmetries

We reconsider the discrete dual of the immediate exchange model and define a more general class of models where mass is split, exchanged and merged. We relate the splitting process to the symmetric inclusion process via thermalization and from that obtain symmetries and self-duality for it and its generalization. We show that analogous properties hold for models where the splitting is related to the symmetric exclusion process or to independent random walkers.     

In-line coupling of microextractions across polymer inclusion membranes to capillary zone electrophoresis for rapid determination of formate in blood samples

Polymer inclusion membranes (PIMs) have several important features, i.e., PIMs are dry and non-porous membranes, which can be prepared ahead of use and stored without noticeable deterioration in extraction performance. In this contribution, in-line coupling of microextractions across PIMs to a separation method for clinical purposes was demonstrated for the first time. Formate (the major metabolite in methanol poisoning) was determined in undiluted human serum and whole blood by capillary zone electrophoresis (CZE) with simultaneous capacitively coupled contactless conductivity detection (C⁴D) and UV–Vis detection. A purpose-made microextraction device with PIM was coupled to a commercial CZE instrument in order to ensure complete automation of the entire analytical procedure, i.e., of formate extraction, injection, CZE separation and quantification. PIMs for formate extractions consisted of 60% (w/w) cellulose triacetate as base polymer and 40% (w/w) Aliquat™ 336 as anion carrier. The method was characterized by good repeatability of peak areas (≤7.0%) and migration times (≤0.8%) and by good linearity of calibration curves (r² = 0.993–0.999). Limits of detection in various matrices ranged from 15 to 54 μM for C⁴D and from 200 to 635 μM for UV–Vis detection and were sufficiently low to clearly distinguish between endogenous and toxic levels of formate in healthy and methanol intoxicated individuals. In addition, PIMs proved that they may act as phase interfaces with excellent long-term stability since once prepared, they retained their extractions properties for, at least, two months of storage.