汾渭盆地地裂缝成因研究中的若干关键问题

汾渭盆地是我国地裂缝发育最强烈的地区,地裂缝类型多样,成因复杂。本文概述了汾渭盆地地裂缝的分布规律,分析了目前汾渭盆地地裂缝成因研究中存在的主要问题,重点围绕构造型地裂缝的成因问题,提出如下研究思路:通过多学科联合手段,重点研究汾渭盆地地裂缝灾害的分布规律及其与活动构造的分布关系与成生联系,建立构造地裂缝的地质结构模型;将现代物理数值模拟技术与高精度观测技术相结合,分析研究构造活动启动地裂缝灾害的力学机理以及构造作用与抽水作用耦合致裂机理;以GPS观测资料为约束,将汾渭盆地地裂缝的成生与青藏、华北大陆变形的动力学过程联系起来,研究该区地裂缝与现今中国大陆动力学的内在联系,揭示大陆驱动力产生地质灾害的动力学机制与模式。     

十三陵抽水蓄能电站上池西外坡岩体稳定分析

上池西外坡岩体稳定是十三陵抽水蓄能电站主要的地质工程问题之一，由于受到倾向池外的数条缓倾角断层以及不良的岩体结构控制，存在着滑动位移、变形失稳的可能性，电站的安全运行受到潜在的威胁。因此对西外坡岩体进行稳定分析，并进行补强处理是必要的。     

Experimental evidence of energy pumping in acousticsMise en évidence expérimentale de pompage énergétique en acoustique

This Note presents an experimental vibro-acoustic set-up that aims to reproduce the energy pumping phenomenon between an acoustic medium and an essentially nonlinear oscillator. It shows a one-way irreversible transfer of energy between the first acoustic mode in a tube and a thin visco-elastic membrane. To cite this article: B. Cochelin et al., C. R. Mecanique 334 (2006).     

Targeted energy transfers in vibro-impact oscillators for seismic mitigation

In the field of seismic protection of structures, it is crucial to be able to diminish ‘as much as possible’ and dissipate ‘as fast as possible’ the load induced by seismic (vibration-shock) energy imparted to a structure by an earthquake. In this context, the concept of passive nonlinear energy pumping appears to be natural for application to seismic mitigation. Hence, the overall problem discussed in this paper can be formulated as follows: Design a set of nonlinear energy sinks (NESs) that are locally attached to a main structure, with the purpose of passively absorbing a significant part of the applied seismic energy, locally confining it and then dissipating it in the smallest possible time. Alternatively, the overall goal will be to demonstrate that it is feasible to passively divert the applied seismic energy from the main structure (to be protected) to a set of preferential nonlinear substructures (the set of NESs), where this energy is locally dissipated at a time scale fast enough to be of practical use for seismic mitigation. It is the aim of this work to show that the concept of nonlinear energy pumping is feasible for seismic mitigation. We consider a two degree-of-freedom (DOF) primary linear system (the structure to be protected) and study seismic-induced vibration control through the use of Vibro-Impact NESs (VI NESs). Also, we account for the possibility of attaching to the primary structure additional alternative NES configurations possessing essential but smooth nonlinearities (e.g., with no discontinuities). We study the performance of the NESs through a set of evaluation criteria. The damped nonlinear transitions that occur during the operation of the VI NESs are then studied by superimposing wavelet spectra of the nonlinear responses to appropriately defined frequency – energy plots (FEPs) of branches of periodic orbits of underlying Conservative systems.     

Dual-beam coaxial amplification system of stimulated Brillouin scattering based on polarization control technology

In the field of Brillouin lidar, it has very important significance to find one method that can amplify the Brillouin scattering signal in real time. One new-type Brillouin lidar detection system based on Nd:YAG pulsed laser and polarization control device is designed in this paper. The key point of this detection system is to have two pulsed coherent lights with same frequency, same polarization and same initial phase, of which one beam is taken as the detection wave for generating stimulated Brillouin scattering signal and the other beam is taken as pumping wave for real time and effective amplification of stimulated Brillouin scattering signal. This detection system mainly includes two pulsed lasers and one electro-optical polarization controller. The laser is mainly used to obtain the pulsed lights with same frequency and same phase, and the polarization controller is mainly used to change the polarization state of two coaxial beams to make them change into same polarization state from orthogonal polarization state thus to enable the pumping wave to amplify the backward stimulated Brillouin scattering signal. It is shown from the experimental results that the adoption of this new system can realize the effect of pumping amplification and can increase the signal to noise ratio to a certain extent.     

聚变实验增殖堆FEB-E粒子抽除和抽气系统(英文)

ＦＥＢ－Ｅ的粒子抽除是通过偏滤器进行的。由４８ 个楔形气室模件环形组装而成的ＦＥＢ－Ｅ偏滤器，位于真空室的下部，与抽气系统和冷却系统相连。ＦＥＢ－Ｅ抽气系统有二个子系统：环粗抽系统和环高真空系统。环高真空系统是由一组处于真空室内１６ 个下部舱口内的低温泵和一组处于生物屏蔽层外的附加涡轮分子泵组成的。这些低温泵能提供的名义总抽速为５７６ｍ ３·ｓ－ １。在偏滤器高中性压力（＞ １Ｐａ）情况下，低温泵入口阀节流控制抽气粒子流。由于偏滤器抽气槽路以及偏滤器下侧通至真空室下部舱口的有限的通导能力，这些低温泵在偏滤器幽僻区域有效抽速为１６０ｍ ３·ｓ－ １。这意味着偏滤器幽僻区域的中性压力应在０．５－ １．０Ｐａ 范围内，以得到８０－ １６０Ｐａ·ｍ ３·ｓ－ １（在预期的偏滤器抽气槽路温度为４７３Ｋ时）范围内的抽气流量。低温泵每次在聚变实验增殖堆燃烧１０００ｓ 后受激运行     

超短脉冲分布反馈染料激光器稳定工作条件分析

 利用耦合波理论，分析了一种作为KrF准分子激光MOPA系统的振荡源-亚皮秒超短脉冲分布反馈染料激光器（DFDL）的输出模式，指出实际的分布反馈染料激光器工作在单纵模状态是周期性增益调制的必然结果。数值模拟结果表明，DFDL输出光谱出现多条谱线的精细结构或调制现象，这是由多个顺序相干脉冲产生的。可以利用这种光谱调制现象来控制激光器的泵浦强度，获得稳定的单脉冲。光谱测量结果表明，在2倍泵浦阈值左右DFDL能够获得稳定的单模单脉冲输出。     

2MW中性束注入器抽气过程分析

一、引言 中性束注入器是要把离子源引出的高能离子转化成高能中性粒子,并输送到聚变装置中,既要提供足够的气体靶厚,以获得高效率的中性化,又要求主真空箱内的气压不超过一定的压强值,以减少再电离损失和对装置的气体负载。对于2MW这样特大的注入器,在设计过程中,不仅力图获得最大传输效率,而且要考虑到工程上的可行性和经济效益。因此,通过对抽气过程的分析计算来优化选择注入器进气方式、真空及抽气系统的各参数是必要的。     

Megawatt peak power 8–13 μm CdSe optical parametric generator pumped at 2.8 μm

Infrared pulses, continuously tunable in the 8–13 μm range, and with up to 1 MW peak power, have been achieved using single-stage frequency conversion in a CdSe travelling-wave optical parametric generator, pumped by 100 ps pulses from an actively mode-locked, Q-switched and cavity dumped 2.8 μm Cr,Er:YSGG laser. The external quantum conversion efficiency reached 10%.     

Notations, Spectroscopic Parameters, Energy Levels and Their Relationship to Effective Hamiltonian Formalism of Diatomic Molecules

This paper presents a part of the culmination of the collective efforts in developing a cohesive and consolidated enunciation of the spectroscopic parameters and their relationship to effective molecular Hamiltonians for diatomic formalism, linear four-atomic formalism and quasi-linearity, Watson Hamiltonian and the complexities in symmetric and asymmetric top spectral structures. All these considered together present a beautiful and consistent picture of molecular spectroscopy. In this paper we deal with the diatomic formalism. This paper forms our tribute to Professor K. Narahari Rao and in the second part of the paper we convoy our gratitude to him with a summary of his more than half century of work and an obituary. We will deal with other forms of molecular species which will be connected to optical pumping and/or interstellar space.