Half‐sandwich Ruthenium (II) complexes with triphenylamine modified dipyridine skeleton and application in biology/luminescence imaging

Four half‐sandwich ruthenium^II (Ru^II) complexes with triphenylamine‐modifed dipyridine frameworks were synthesized and characterized. The cytotoxicity of target complexes toward A549 (lung cancer cells), HeLa (cervical cancer cells) and HepG2 (hepatoma cells) were obtained by the MTT assay, which were superior to cisplatin with the IC₅₀ values changed from 2.4 ± 0.1 μM to 9.2 ± 2.7 μM. Meanwhile, complexes possess the ability of antimetastasis to cancer cells. Ru^II complexes could be transported by serum albumin, catalyze the conversion of NADH (the reduced state of nicotinamide‐adenine dinucleotide) to NAD⁺ and induce the accumulation of reactive oxygen species, which confirmed the antineoplastic mechanism of oxidation. Ru^II complexes could enter A549 cells followed by a non‐energy dependent cellular uptake mechanism, target lysosomes with the Pearson's colocalization coefficient of 0.75, lead to lysosomal damage, disturb the cell cycle (S phase), and eventually induce apoptosis. The results demonstrate that these Ru^II complexes are potential anticancer agents with dual functions, including metastasis inhibition and lysosomal damage.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).     

基于三苯胺的荧光探针设计、合成与应用研究进展

螺旋桨结构的三苯胺荧光团既能作为强的电子供体,又能作为潜在的聚集诱导发光(AIE)骨架.同时,三苯胺衍生物很容易通过简单的反应进行结构修饰,如醛基、氨基、硼酸基、卤素、乙炔基等取代的三苯胺能够发生缩合反应或偶联反应等,进一步功能化.因此,功能性三苯胺类化合物被广泛用于太阳能电池、荧光染料、固态发光材料和荧光探针的分子设计中.根据三苯胺基荧光探针的检测对象,将其分为阳离子、阴离子和中性小分子荧光探针三类,并从分子的结构和性能出发,重点综述了近五年来国内外三苯胺基荧光探针在分子设计、合成与检测应用方面的最新进展.展望未来,构建近红外发光和高量子效率的AIE荧光探针值得关注.     

Broadband Visible Light-Absorbing [70]Fullerene-BODIPY-Triphenylamine Triad: Synthesis and Application as Heavy Atom-Free Organic Triplet Photosensitizer for Photooxidation

A broadband visible light-absorbing [70]fullerene-BODIPY-triphenylamine triad (C₇₀-B-T) has been synthesized and applied as a heavy atom-free organic triplet photosensitizer for photooxidation. By attaching two triphenylmethyl amine units (TPAs) to the π-core of BODIPY via ethynyl linkers, the absorption range of the antenna is extended to 700 nm with a peak at 600 nm. Thus, the absorption spectrum of C₇₀-B-T almost covers the entire UV–visible region (270–700 nm). The photophysical processes are investigated by means of steady-state and transient spectroscopies. Upon photoexcitation at 339 nm, an efficient energy transfer (ET) from TPA to BODIPY occurs both in C₇₀-B-T and B-T, resulting in the appearance of the BODIPY emission at 664 nm. Direct or indirect (via ET) excitation of the BODIPY-part of C₇₀-B-T is followed by photoinduced ET from the antenna to C₇₀, thus the singlet excited state of C₇₀ (¹C₇₀^*) is populated. Subsequently, the triplet excited state of C₇₀ (³C₇₀^*) is produced via the intrinsic intersystem crossing of C₇₀. The photooxidation ability of C₇₀-B-T was studied using 1,5-dihydroxy naphthalene (DHN) as a chemical sensor. The photooxidation efficiency of C₇₀-B-T is higher than that of the individual components of C₇₀-1 and B-T, and even higher than that of methylene blue (MB). The photooxidation rate constant of C₇₀-B-T is 1.47 and 1.51 times as that of C₇₀-1 and MB, respectively. The results indicate that the C₇₀-antenna systems can be used as another structure motif for a heavy atom-free organic triplet photosensitizer.     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Multifunctional triphenylamine polymers synthesized via direct (hetero) arylation polymerization

The design rules for creating multifunctional organic electronic materials are currently limited. By copolymerizing twisted triphenylamine (TPA) and electron rich dioxythiophene (XDOT) monomers via Direct (Hetero) Arylation Polymerization (DHAP), a set of polymers are obtained that perform as yellow to transmissive electrochromic (EC) films with up to 45% contrast, as well as in electroluminescent (EL) applications, achieving a luminance of ∼450 cd/m² in yellow‐green polymer light‐emitting diodes (PLEDs). In addition, polymerizing TPA with a donor‐acceptor‐donor monomer results in a low‐bandgap polymer that achieves power conversion efficiencies up to 2.5% when blended with PC₇₁BM in conventional organic photovoltaic (OPV) devices. Incorporation of TPA units into the polymer backbone largely breaks any aggregation and ordering in the solid‐state, leading to highly soluble materials that form smooth, reproducible thin films. The TPA unit also serves to break conjugation throughout the polymer backbone, providing precise control over optical and electronic properties through choice of comonomer. These results suggest that TPA copolymers can be useful for achieving multi‐functionality without sacrificing facile solution processability, making them promising candidates for multifunctional devices like dual EC/EL displays. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 147–153     

一种红光发射的粘度荧光探针

以三苯胺和苯并噻唑盐为原料,设计合成了一种具有红光发射特性的D-π-A型荧光粘度探针N-乙酸乙酯基-2-(4-甲酸甲酯基三苯胺-4'-乙烯基)苯并噻唑六氟磷酸盐(L),运用现代分析测试手段进行了系统地表征。 研究结果表明,探针L的最大发射波长为630 nm,能有效地降低生物背景,提高生物成像的信噪比。 该探针对粘度有很好的荧光响应,其荧光强度比值(I/I₀)的对数与粘度的对数呈现很好的线性关系(R²=0.9934)。 此外,探针L对极性的敏感性小,且荧光信号不受生物分子的干扰。 生物学研究结果表明,探针L具有低的细胞毒性,可应用于细胞内微环境粘度的荧光成像。     

Effect of Bulky Functional Groups on Donor and Acceptor Interactions and their Photoluminescence Properties

Material designs that use donor and acceptor units are often found in organic optoelectronic devices. Molecular level insight into the interactions between donors and acceptors are crucial for understanding how such interactions can modify the optical properties of the organic optoelectronic materials. In this paper, tris(4-(tert-butyl)phenyl)amine (pTPA) was synthesized as a donor in order to compare with unmodified triphenylamine (TPA) in a donor–acceptor system by having 2,4,6-triphenyl-1,3,5-triazine (TRZ) as an acceptor. Dimerization of donors and acceptors occurred in solvent when the concentration of solute is high. At 0 K, using a polarizable continuum model, the nitrogen atom of TPA is found to stack on top of the center of triazine of TRZ, whereas such alignment is offset in pTPA and TRZ. We attributed such alignment in TPA-TRZ as the result of attractive interactions between partial localization of 2p_z electrons at the nitrogen atom of TPA and the π deficiency of triazine in TPA-TRZ. By taking into account random motions of the solvent effect at 300 K in quantum molecular dynamics and classical molecular dynamics simulations to interpret the marked difference in emission spectra between TPA-TRZ and pTPA-TRZ, it was revealed that the attractive interaction between pTPA and TRZ in toluene is weaker than TPA and TRZ. Because of the weaker attractive interaction between pTPA and TRZ in toluene, the dimers adopted numerous ground state conformations resulting in broad emission bands superimposed with multiple small Gaussian peaks. This is in contrast to TPA-TRZ which has only one dominant dimer conformation. This study demonstrates that the strength of intermolecular interactions between donors and acceptors should be taken into consideration in designing supramolecular structures.     

(Co)oxidation/cyclization processes upon irradiation of triphenylamine

Irradiation of triphenylamine (Ph₃N) in nitrogen-flushed solution leads to 9-phenylcarbazole and two tetrahydroderivatives (1,2,3,4- and 1,2,7,8-) via disproportionation of the corresponding 4a,4b-dihydrocarbazole. In oxygen-equilibrated solution oxidative cyclization occurs through the intermediacy of a triplet peroxy diradical, which either abstracts a hydrogen atom intramolecularly or (mainly) cleaves back to the reagents. The role of the key intermediates is supported by DFT calculations and by trapping by triarylphosphines (that are thus efficiently oxidized, while preventing the cyclization of Ph₃N). The hydroperoxide, on the other hand, causes inefficient co-oxidation of sulfides.