The Impacts of Crystalline Structure and Different Surface Functional Groups on Drug Release and the Osseointegration Process of Nanostructured TiO2

In implantable materials, surface topography and chemistry are the most important in the effective osseointegration and interaction with drug molecules. Therefore, structural and surface modifications of nanostructured titanium dioxide (TiO₂) layers are reported in the present work. In particular, the modification of annealed TiO₂ samples with —OH groups and silane derivatives, confirmed by X-ray photoelectron spectroscopy, is shown. Moreover, the ibuprofen release process was studied regarding the desorption-desorption-diffusion (DDD) kinetic model. The results proved that the most significant impact on the release profile is annealing, and further surface modifications did not change its kinetics. Additionally, the cell adhesion and proliferation were examined based on the MTS test and immunofluorescent staining. The obtained data showed that the proposed changes in the surface chemistry enhance the samples’ hydrophilicity. Moreover, improvements in the adhesion and proliferation of the MG-63 cells were observed.     

黄光类水滑石的制备、表面改性及应用

采用共沉淀法合成了荧光类水滑石材料,该材料在470 nm蓝光激发下可发出黄色荧光(557 nm),采用硅烷偶联剂对其进行表面改性,探讨了表面改性对黄光类水滑石的发光性能、结构及热稳定性的影响。将改性黄光类水滑石与GaN基蓝光芯片封装后制得了白光LED。研究结果表明,改性的黄光类水滑石是制作白光LED可供选用的黄色发光材料。本文成功地将低温一步法制备得到的金属有机配合物/无机纳米杂化材料应用于LED,拓展了LED用荧光粉的选用范围。     

Modulating microstructure and optical properties of hydrogenated nanocrystalline silicon photovoltaic materials prepared under hydrogen diluted silane PECVD by various DC bias

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films were fabricated by plasma enhanced chemical vapor deposition under the various negative substrate bias voltages with hydrogen as a diluent of silane. The microstructure and optical properties of nc-Si:H thin films were studied by Raman scattering spectroscopy, X-ray diffraction (XRD), transmission electron microscopy, and optical transmission spectroscopy. Raman spectra and XRD pattern reveal that applying negative bias voltages at the moderate level favors the enhancement of crystalline volume fraction, increase of crystallite sizes and decrease of residual stress. We also demonstrated that the negative direct current bias can be used to modulate the volume fraction of voids, refractive index, absorption coefficient, compactness and ordered degree of nc-Si:H films. It is found that the film deposited at −80 V shows not only high crystallinity, size of crystallite, and static index n₀ but also low residual stress and volume fraction of voids. Furthermore, the microstructural evolution mechanism of nc-Si:H thin films prepared at different bias voltages is tentatively explored.     

二甲基—γ—全氟辛酰氧丙基硅烷自组装膜的制备及其摩擦学性能研究

利用分子自组装技术 ,用含有全氟烷基的氯硅烷作为前驱体 ,在活化玻璃表面制备了二甲基 -γ-全氟辛酰氧丙基硅烷单分子膜 ;用 X射线光电子能谱仪对组装膜表面的几种特征元素及其化学环境进行了表征 ;采用接触角测定仪测定了蒸馏水在自组装薄膜表面的接触角 ,在动静摩擦磨损试验机上评价了薄膜同 GCr1 5钢球对摩时的摩擦磨损性能 .结果表明 :所制备的自组装膜的表面自由能很低 ,具有很好的疏水 -疏油性 ,其对水的接触角高达 1 1 0°;二甲基 -γ-全氟辛酰氧丙基硅烷组装膜可以降低基片的摩擦系数 ,而且在较低负荷下具有很好的耐磨性     

Versatile functional poly(3‐hexylthiophene) for hybrid particles synthesis by the grafting onto technique: Core@shell ZnO nanorods

We demonstrate an efficient strategy to anchor poly(3‐hexylthiophene) (P3HT) onto zinc oxide (ZnO) surfaces. Synthesis of a novel triethoxysilane‐terminated regioregular P3HT is herein reported and supported by thorough characterization. Three triethoxysilane‐terminated P3HTs of different molar masses were prepared via a hydrosilylation reaction from allyl‐terminated P3HT. MALDI‐TOF and ¹H NMR were performed to characterize the polymer and show that around 80% of the chains are end‐functionalized. These polymers were then grafted onto the ZnO nanorods to create a macromolecular self‐assembled monolayer. This versatile technique could be subsequently applied to different metal oxide surfaces, such as silicon, titanium, or indium‐tin oxide, and represents a new one‐pot strategy based on triethoxysilane coupling reaction. Importantly, the influence of the molar mass on the grafting density and the polymer shell thickness was studied via thermo gravimetric analysis and transmission electron microscopy. The optical properties of the hybrid materials were determined by UV–visible absorption and photoluminescence to show a quenching effect of P3HT fluorescence by ZnO when grafted. This electronic transfer associated with an improved miscibility of the ZnO@P3HT, makes these hybrid materials suitable candidates for photovoltaic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 30–38     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

硅烷基咪唑双三氟甲烷磺酰亚胺离子液体气相色谱固定相的性能评价

以双三氟甲烷磺酰亚胺离子([NTf₂]^-)为阴离子,合成阳离子烷基取代不同(C1、C2和C4)的硅烷基咪唑离子液体,以其为固定相制备气相色谱填充柱。 硅烷基咪唑离子液体为强极性固定相;阳离子结构影响固定相的热稳定性、极性和分离性能。 在这些离子液体固定相中,1-丁基-3-[(3-三甲氧基硅基)-丙基]咪唑双三氟甲烷磺酰亚胺([PBIM]NTf₂)对Grob试剂分离性能较好。 利用溶剂化作用参数模型,评价[PBIM]NTf₂固定相特性,研究固定相-组分分子之间相互作用机制;同时考察[PBIM]NTf₂色谱柱对不同类型化合物的分离性能。 结果表明,[PBIM]NTf₂固定相主要作用力是氢键碱性和偶极作用,对烷烃、醇、酯和胺等不同类型的样品组分表现出良好的分离能力。     

Spectral parameters and Hamaker constants of silicon hydride compounds and organic solvents

Cyclopentasilane (CPS) and polydihydrosilane, which consist of hydrogen and silicon only, are unique materials that can be used to produce intrinsic silicon film in a liquid process, such as spin coating or an ink-jet method. Wettability and solubility of general organic solvents including the above can be estimated by Hamaker constants, which are calculated according to the Lifshitz theory. In order to calculate a Hamaker constant by the simple spectral method (SSM), it is necessary to obtain absorption frequency and function of oscillator strength in the ultraviolet region. In this report, these physical quantities were obtained by means of an optical method. As a result of examination of the relation between molecular structures and ultraviolet absorption frequencies, which were obtained from various liquid materials, it was concluded that ultraviolet absorption frequencies became smaller as electrons were delocalized. In particular, the absorption frequencies were found to be very small for CPS and polydihydrosilane due to σ-conjugate of their electrons. The Hamaker constants of CPS and polydihydrosilane were successfully calculated based on the obtained absorption frequency and function of oscillator strength.     

Preparation of nano/micro-scale column-like topography on PDMS surfaces via vapor deposition: Dependence on volatility solvents

In this work, a column-like nano/micro-scale topography surface has been prepared via trichloro(octyl)silane (TCOS) vapor deposition on the air plasma oxidized polydimethylsiloxane (PDMSOx) surface. TCOS was mixed into n-heptyl alcohol and dimethyl-silicone oil to form a series of mixture. TCOS could anchor to the PDMSOx surface to form column-like nano/micro-scale topography while n-heptyl alcohol and TCOS volatilized to the PDMSOx surface in the subsequent vapor phase process. These surfaces were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared-attenuated total reflection, contact angle measuring system and atomic force microscopy. It was shown that TCOS had been successfully assembled on the polydimethylsiloxane surface. N-heptyl alcohol mixed into alkylsiloxane could regulate the scale and roughness of column-like nano/micro-scale topography.