Study of spatial inhomogeneity in inverted all‐polymer solar cells: Effect of solvent and annealing

The efficiency optimization of bulk heterojunction solar cells requires the control of the local active materials arrangement in order to obtain the best compromise between efficient charge generation and charge collection. Here, we investigate the large scale (10–100 μm) inhomogeneity of the photoluminescence (PL) and the external quantum efficiency (EQE) in inverted all‐polymer solar cells (APSC) with regioregular poly(3‐hexylthiophene) (P3HT):poly(9,9‐dioctylfluorene‐co‐benzothiadiazole) (F8BT) active blends. The morphology and the local active polymer mixing are changed by depositing the active layer from four different solvents and by thermal annealing. The simultaneous PL and EQE mapping allowed us to inspect the effects of local irregularities of active layer thickness, polymer mixing, polymer aggregation on the charge generation and collection efficiencies. In particular, we show that the increase of the solvent boiling point affects the EQE non‐uniformity due to thickness fluctuations, the density non‐uniformity of rrP3HT aggregate phase, and the blend components clustering. The thermal annealing leads to a general improvement of EQE and to an F8BT clustering in all the samples with locally decrease of the EQE. We estimate that the film uniformity optimization can lead to a total EQE improvement between 2.7 and 6.3 times. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 804–813     

Characterization of a Novel Intrinsic Luminescent Room‐Temperature Ionic Liquid Based on [P6,6,6,14][ANS]

Intrinsically luminescent room‐temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8‐anilinonaphthalene‐1‐sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P_6,6,6,14]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and ¹H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (T_g) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.     

Synthesis and Photophysical Properties of a Sc3N@C80‐Corrole Electron Donor–Acceptor Conjugate

Embedding endohdedral metallofullerenes (EMFs) into electron donor–acceptor systems is still a challenging task owing to their limited quantities and their still largely unexplored chemical properties. In this study, we have performed a 1,3‐dipolar cycloaddition reaction of a corrole‐based precursor with Sc₃N@C₈₀ to regioselectively form a [5,6]‐adduct ( 1 ). The successful attachment of the corrole moiety was confirmed by mass spectrometry. In the electronic ground state, absorption spectra suggest sizeable electronic communications between the electron acceptor and the electron donor. Moreover, the addition pattern occurring at a [5,6]‐bond junction is firmly proven by NMR spectroscopy and electrochemical investigations performed with 1 . In the electronically excited state, which is probed in photophysical assays with 1 , a fast electron‐transfer yields the radical ion pair state consisting of the one‐electron‐reduced Sc₃N@C₈₀ and of the one‐electron‐oxidized corrole upon its exclusive photoexcitation. As such, our results shed new light on the practical work utilizing EMFs as building blocks in photovoltaics.     

Synthesis and Chiroptical Properties of Chiral Carbazole-Based BODIPYs

A series of carbazole-based boron dipyrromethenes (BODIPYs) 2 a – g bearing binaphthyl units have been synthesized by the Et₂AlCl-mediated reaction of the corresponding BODIPY difluorides 1 a – g with 1,1′-binaphthalene-2,2′-diol. Substituents such as halogen, nitrile, and amino groups were tolerated under the reaction conditions, and the reaction of the phenylethynyl-substituted 1 h gave (R,R)- 3 h bearing two binaphthyl units. The chiroptical properties of these dyes with different substituents were investigated by UV/Vis, CD, fluorescence, and circularly polarized luminescence (CPL) spectroscopy. The CD spectra showed Cotton effects in the absorption region of the BODIPY moieties. In addition, they showed CPL both in solution and in the solid state. Interestingly, several dyes recorded higher g_lum values in the solid state, probably due to intermolecular interactions. Because (R,R)- 3 h recorded relatively low g_lum values, the diastereomer (R,S)- 3 h was prepared. The (R,S) diastereomer showed intense CPL, which suggests a synergetic effect of the two binaphthyl groups. Finally, chiral carbazole-based BODIPY dimers have been synthesized for the first time and their chiroptical properties were investigated. They showed redshifted fluorescence and CPL, which reached the near-IR (NIR) region in the solid state.     

Synthesis of Giant π-Extended Molecular Macrocyclic Rings as Finite Models of Carbon Nanotubes Displaying Enriched Size-Dependent Physical Properties

Bottom-up synthesis of π-extended macrocyclic carbon rings is promising for constructing length- and diameter-specific carbon nanotubes (CNTs). However, it is still a great challenge to realize size-controllable giant carbon macrocycles. Herein, a tunable synthesis of curved nanographene-based giant π-extended macrocyclic rings (CHBC[n]s; n=8, 6, 4), as finite models of armchair CNTs, is reported. Among them, CHBC[8] contains 336 all-carbon atoms and is the largest cyclic conjugated molecular CNT segment ever reported. CHBC[n]s were systematically characterized by various spectroscopic methods and applied in photoelectrochemical cells for the first time. This revealed that the proton chemical shifts, fluorescence, and electronic and photoelectrical properties of CHBC[n]s are highly dependent on the macrocycle diameter. The tunable bottom-up synthesis of giant macrocyclic rings could pave the way towards large π-extended diameter- and chirality-specific CNT segments.     

Stereoselective Formation of Facial Tris-Cyclometalated PtIV Complexes: Dual Phosphorescence from Heteroleptic Derivatives

A stereoselective synthetic route to homo- and heteroleptic facial tris-cyclometalated Pt^IV complexes is reported, involving the oxidative addition of 2-(2-pyridyl)- or 2-(1-isoquinolinyl)benzenediazonium salts to cis-[Pt(C^N)₂] precursors, with C^N=cyclometalated 2-(p-tolyl)pyridine (tpy), 2-phenylquinoline (pq), 2-(2-thienyl)pyridine or 1-phenylisoquinoline (piq), to produce labile diazenide intermediates that undergo photochemical or thermal elimination of N₂. The method allows the preparation of derivatives bearing cyclometalated ligands of low π–π* transition energies. The new complexes exhibit phosphorescence in fluid solution at room temperature arising from triplet ligand-centered (³LC) excited states, which, in the cases of the heteroleptic derivatives, involve the ligand with the lowest π–π* gap. The heteroleptic piq derivatives exhibit fluorescence and dual phosphorescence from different ligand-centered excited states in rigid media, demonstrating the potential of cyclometalated Pt^IV complexes as multi-emissive materials.     

Synthesis of Polysubstituted Symmetrical BODIPYs via Fischer Carbene Complexes: Theoretical,Photophysical and Electrochemical Evaluation

A series of new symmetrical highly substituted BODIPYs 6 a – l was synthesized through a prefunctionalization approach in 35 %–89 % yields from the pyrrole core. This strategy allowed modulation of the substituents at the different positions based on the choice of Fischer's alkynyl carbenes, oxazolones and aldehydes used as precursors. The substituent variation at positions 2, 6, 3 and 5 had the greatest effect on the modulation of their photophysical properties such as absorption (λ_abs) and emission (λ_em) wavelengths, extinction coefficient (ϵ), quantum yields (ϕ), Stokes shifts (Δν), fluorescence decay, radiative (k_rad) and non-radiative (k_nr) constants and the CIE 1931 coordinates. Theoretical calculations allowed to corroborate the effect of the substituents of meso-position on the modification of the dihedral angles. Cyclic voltammetry studies revealed that the BODIPY series presents similar redox potential behavior, being electrochemically active even in successive cycles, which suggests that transport by diffusion is the dominant process.     

Synthesis and optical properties of poly(aryl ether ketone)s incorporating porphyrins in the backbones

A series of novel soluble poly(aryl ether ketone)s (PAEKs) based on 5,10‐bis(4‐hydroxyphenyl)?15,20‐diphenylporphyrin (cis‐DHTPP), 4,4′‐(hexafluoroisopropylidene) diphenol (6FBPA) and 4,4′‐difluorobenzophenone (DFB) were synthesized and characterized by FT‐IR, ¹H‐NMR, UV–vis and fluorescence spectroscopies. The intrinsic photophysical properties of porphyrins were preserved because of the absence of photoinduced electron transfer in the polymer chains. Investigation of the copolymers thermal properties indicated that these polymers had high glass transition temperatures and excellent thermal stabilities. The results of Z‐scan and optical limiting measurements manifested that incorporation of the porphyrin chromophore into the main chain engendered the novel PAEKs with superior nonlinear optical properties and optical limiting function, which could be effectively tuned by varying the molar ratio of porphyrin monomers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1282–1290     

Laser Sculpting of Atomic sp,sp2, and sp3 Hybrid Orbitals

Atomic sp, sp², and sp³ hybrid orbitals were introduced by Linus Pauling to explain the nature of the chemical bond. Quantum dynamics simulations show that they can be sculpted by means of a selective series of coherent laser pulses, starting from the 1s orbital of the hydrogen atom. Laser hybridization generates atoms with state‐selective electric dipoles, opening up new possibilities for the study of chemical reaction dynamics and heterogeneous catalysis.     

Photophysics of a Ruthenium 4H‐Imidazole Panchromatic Dye in Interaction with Titanium Dioxide

The photophysics of bis(4,4′‐di‐tert‐butyl‐2,2′‐bipyridine‐κ²N,N′)[2‐(4‐carboxyphenyl)‐4,5‐bis(p‐tolylimino‐κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO₂ film. The studied substitution pattern of the 4H‐imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H‐imidazole ligand that has been previously investigated. Protonation at the 4H‐imidazole ring decreases the excited‐state lifetime in solution. When the unprotonated dye is anchored to TiO₂, photoinduced electron injection occurs from thermally nonrelaxed triplet metal‐to‐ligand charge transfer (³MLCT) states with a characteristic time constant of 0.5 ps and an injection efficiency of roughly 25 %. Electron injection from the subsequently populated thermalized ³MLCT state of the dye does not take place. The energy of this state seems to be lower than the conduction band edge of TiO₂.