Preparation and Characterisation of a Bis-μ-Hydroxo-NiIII2 Complex

Hydroxide-bridged high-valent oxidants have been implicated as the active oxidants in methane monooxygenases and other oxidases that employ bimetallic clusters in their active site. To understand the properties of such species, bis-μ-hydroxo-Ni^II₂ complex ( 1 ) supported by a new dicarboxamidate ligand (N,N′-bis(2,6-dimethyl-phenyl)-2,2-dimethylmalonamide) was prepared. Complex 1 contained a diamond core made up of two Ni^II ions and two bridging hydroxide ligands. Titration of the 1 e⁻ oxidant (NH₄)₂[Ce^IV(NO₃)₆] with 1 at −45 °C showed the formation of the high-valent species 2 and 3 , containing Ni^IINi^III and Ni^III₂ diamond cores, respectively, maintaining the bis-μ-hydroxide core. Both complexes were characterised using electron paramagnetic resonance, X-ray absorption, and electronic absorption spectroscopies. Density functional theory computations supported the spectroscopic assignments. Oxidation reactivity studies showed that bis-μ-hydroxide-Ni^III₂ 3 was capable of oxidizing substrates at −45 °C at rates greater than that of the most reactive bis-μ-oxo-Ni^III complexes reported to date.     

Determining the permeability of organic solvents through PVC pipes using a direct SPME model

The permeability of aromatic hydrocarbons, i.e. BTEX and styrene, through PVC pipes was investigated using a 6-cm pipe-bottle model with direct solid-phase microextraction (SPME) sampling. It was found that an aromatic hydrocarbon with a large molecular size or low polarity may be less permeable through PVC pipes. In addition, the diffusion coefficients of BTEX and styrene in PVC pipes ranged from 4.87 to 7.64 × 10⁻⁸ cm²/s. According to the simulation results of a one-dimensional diffusion model, it is speculated that diffusion transport of benzene and toluene in PVC pipes may have non-Fickian behavior. The advantage of using the innovated test model is that SPME provides a nondestructive analytical means to monitor the concentrations of organic compounds in pipe-water. Therefore, the pipe-bottle model developed herein has potential applications in determining the resistance of polymeric pipes to permeation by solvents in the aqueous solution.     

Predicting polycyclic aromatic hydrocarbon formation with an automatically generated mechanism for acetylene pyrolysis

Using Reaction Mechanism Generator (RMG), we have automatically constructed a detailed mechanism for acetylene pyrolysis, which predicts formation of polycyclic aromatic hydrocarbons (PAHs) up to pyrene. To improve the data available for formation pathways from naphthalene to pyrene, new high‐pressure limit reaction rate coefficients and species thermochemistry were calculated using a combination of electronic structure data from the literature and new quantum calculations. Pressure‐dependent kinetics for the CH potential energy surface calculated by Zádor et al. were incorporated to ensure accurate pathways for acetylene initiation reactions. After adding these new data into the RMG database, a pressure‐dependent mechanism was generated in a single RMG simulation which captures chemistry from C to C. In general, the RMG‐generated model accurately predicts major species profiles in comparison to plug‐flow reactor data from the literature. The primary shortcoming of the model is that formation of anthracene, phenanthrene, and pyrene are underpredicted, and PAHs beyond pyrene are not captured. Reaction path analysis was performed for the RMG model to identify key pathways. Notable conclusions include the importance of accounting for the acetone impurity in acetylene in accurately predicting formation of odd‐carbon species, the remarkably low contribution of acetylene dimerization to vinylacetylene or diacetylene, and the dominance of the hydrogen abstraction CH addition (HACA) mechanism in the formation pathways to all PAH species in the model. This work demonstrates the improved ability of RMG to model PAH formation, while highlighting the need for more kinetics data for elementary reaction pathways to larger PAHs.     

Monitoring the Light-induced Isomerisation of the Prototypical Polycyclic Aromatic Hydrocarbons C10H8+ through Ion-Molecule Reactions

Structural rearrangements in ions are essential for understanding the composition and evolution of energetic and chemically active environments. This study explores the interconversion routes for simple polycyclic aromatic hydrocarbons, namely naphthalene and azulene radical cations (C₁₀H₈⁺), by combining mass spectrometry and vacuum ultraviolet tunable synchrotron radiation through the chemical monitoring technique. Products of ion-molecule reactions are used to probe C₁₀H₈⁺ structures that are formed as a function of their internal energies. Isomerisation from azulene radical cation towards naphthalene radical cation in a timescale faster than 80 μs was monitored, whereas no reverse isomerisation was observed in the same time window. When energising C₁₀H₈⁺ with more than 6 eV, the reactivity of C₁₀H₈⁺ unveils the formation of a new isomeric group with a contrasted reactivity compared with naphthalene and azulene cations. We tentatively assigned these structures to phenylvinylacetylene cations.     

Computational Studies on the Structures of Nanographenes with Various Edge Functionalities

Computational studies have often been carried out on hydrogen-terminated nanographenes (NGs). These structures are, however, far from those deduced from experimental observations, which have suggested armchair edges with two carboxy groups on the edges as dominant. We conducted computational studies on NGs consisting of C₄₂, C₆₀, C₇₈, C₉₆, C₁₄₂, and C₁₇₄ carbon atoms with hydrogen, carboxy, and N-methyl imide-terminated armchair edges. DFT calculations inform distorted basal planes and similar HOMO-LUMO gaps, indicating that the edge oxidation and functionalization do not very influence the electronic structure. Comparison of observed UV-vis spectra of carboxy- and N-octadecyl chain terminated NGs with calculated spectra of model NGs informs the contribution of π-π* transitions on the basal plane to the absorptions in the visible region. A dimeric structure of NG and octadecyl-installed NG demonstrate that both the distorted basal planes and the steric contacts among the functional groups widen the surface-to-surface distance thereby allowing the invasion of solvent molecules between the surfaces. This picture is consistent with the improved solubility of edge-modified NGs.     

Fluorescent In Situ Targeting Probes for Rapid Imaging of Ovarian‐Cancer‐Specific γ‐Glutamyltranspeptidase

γ‐Glutamyltranspeptidase (GGT) is a tumor biomarker that selectively catalyzes the cleavage of glutamate overexpressed on the plasma membrane of tumor cells. Here, we developed two novel fluorescent in situ targeting (FIST) probes that specifically target GGT in tumor cells, which comprise 1) a GGT‐specific substrate unit (GSH), and 2) a boron–dipyrromethene (BODIPY) moiety for fluorescent signalling. In the presence of GGT, sulfur‐substituted BODIPY was converted to amino‐substituted BODIPY, resulting in dramatic fluorescence variations. By exploiting this enzyme‐triggered photophysical property, we employed these FIST probes to monitor the GGT activity in living cells, which showed remarkable differentiation between ovarian cancer cells and normal cells. These probes represent two first‐generation chemodosimeters featuring enzyme‐mediated rapid, irreversible aromatic hydrocarbon transfer between the sulfur and nitrogen atoms accompanied by switching of photophysical properties.     

The development of an artificial organic networks toolkit for LabVIEW

Two of the most challenging problems that scientists and researchers face when they want to experiment with new cutting‐edge algorithms are the time‐consuming for encoding and the difficulties for linking them with other technologies and devices. In that sense, this article introduces the artificial organic networks toolkit for LabVIEW? (AON‐TL) from the implementation point of view. The toolkit is based on the framework provided by the artificial organic networks technique, giving it the potential to add new algorithms in the future based on this technique. Moreover, the toolkit inherits both the rapid prototyping and the easy‐to‐use characteristics of the LabVIEW? software (e.g., graphical programming, transparent usage of other softwares and devices, built‐in programming event‐driven for user interfaces), to make it simple for the end‐user. In fact, the article describes the global architecture of the toolkit, with particular emphasis in the software implementation of the so‐called artificial hydrocarbon networks algorithm. Lastly, the article includes two case studies for engineering purposes (i.e., sensor characterization) and chemistry applications (i.e., blood–brain barrier partitioning data model) to show the usage of the toolkit and the potential scalability of the artificial organic networks technique. © 2015 Wiley Periodicals, Inc.     

气相色谱-质谱法检测益智药材中16种多环芳烃

建立了气相色谱-质谱联用技术同时测定益智药材中16种多环芳烃(PAHs)的分析方法。最佳萃取条件为：取样品2.0 g,加入同位素内标后用无水乙醇、水混合溶解,以10 mL正己烷提取;提取液先过Florisil柱固相萃取,经氢氧化钾-乙醇溶液皂化,多环芳烃分子印迹柱固相萃取后,以5 mL二氯甲烷-正己烷(1∶1,体积比)进行洗脱;采用DB-EUPAH毛细管色谱柱进行分离,内标标准曲线法定量测定。在此条件下,16种多环芳烃的线性范围为1.0~200.0 μg/L(r2 ≥ 0.992 5);检出限(S/N=3)为0.3~1.0 μg/kg;在不同浓度(1、3、10 μg/kg)基质加标条件下,苯并［c］芴(BcFL)的加标回收率为65.4%~72.8%,日内相对标准偏差(RSD,n=6)为6.0%~7.4%,日间RSD(n=6)为8.5%;其他15种多环芳烃的加标回收率为89.3%~116%,日内RSD(n=6)为0.10%~6.1%,日间RSD(n=6)为1.2%~7.5%。该方法的前处理净化效果好、灵敏度高、准确度高,适用于益智药材中16种多环芳烃的定量检测。     

PDMS-Au复合基底上多环芳烃分子的表面增强拉曼光谱

利用聚二甲基硅氧烷(PDMS)对有机物的富集功能,通过在金纳米粒子单层膜(Au MLF)表面旋涂薄层PDMS膜制备PDMS-Au MLF复合表面增强拉曼光谱(SERS)基底.研究了SERS增强性能与旋涂液浓度及稀释溶剂间的关系,考察了复合基底增强活性的均匀性.研究发现,采用叔丁醇为稀释溶剂,浓度为2%(质量分数)的旋涂液时所得复合基底表面多环芳烃(PAHs)的SERS信号强度最高,且此基底SERS信号强度偏差小于10%.分别以PDMS-Au MLF复合材料和Au MLF作为基底,对比研究了对萘、蒽、菲和芘4种多环芳烃的SERS检测能力.结果表明,PDMS-Au MLF复合基底对以上4种有机物的检出限分别为10~(-6),10~(-7),10~(-8)及10~(-7)mol/L,相比于单一Au MLF基底,其检测限至少降低了1个数量级,这主要源自于PDMS对PAHs的富集作用,且此类复合基底可用于多种多环芳烃混合物的特征识别.     

矩形多环芳烃的合成

本文用3,4-二苯基-2,5-二(3,5-二溴苯基)环戊二烯酮(4a)与二苯乙炔(5a)通过Diels-Alder环加成反应得到1,2,4,5-四苯基-3,6-二(3,5-二溴苯基)苯(6a)。化合物6a通过经典的Suzuki偶联反应得到1,2,4,5-四苯基-3,6-二(3,5-二(4-十二烷基噻吩))苯基苯(8a),再利用Fe Cl3作为氧化剂发生Scholl氧化脱氢关环反应,得到目标化合物1a。采用类似合成方法,得到目标化合物1b。化合物的结构均通过1H NMR和MALDI-TOF MS表征,并对其光谱特征、热性能及电学性能进行了初步研究。