Conformationally blocked quinoxaline cavitand as solid-phase microextraction coating for the selective detection of BTEX in air

A tetraquinoxaline cavitand functionalized with methylenoxy bridges at the upper rim is proposed as selective solid-phase microextraction (SPME) coating for the determination of BTEX at trace levels in air. The SPME fibers were characterized in terms of film thickness, morphology, thermal stability and extraction capabilities. An average coating thickness of 35 (±4) μm, a thermal stability up to 350 °C and a good fiber-to-fiber and batch-to-batch repeatability with RSD lower than 15% were obtained. Excellent enrichment factors ranging from 360–700 × 10³ were obtained for the investigated compounds. Finally, method validation proved the capabilities of the developed coating for the selective sampling of BTEX, achieving LOD values in the 0.4–1.2 ng m⁻³ range.     

Zeolite‐SiC in PVC Matrix as a New SPME Fiber for Gas Chromatographic Determination of BTEX in Water and Soil Samples

A new SPME fiber based on mixture of zeolite and silicon carbide in PVC matrix was made and its application for sampling of BTEX compounds from headspace of water and soil samples was studied. After optimization of conditions, the proposed fiber was used for determination of BTEX in real samples obtained from rivers and soils of gasoline reservoirs surroundings. The method has good linearity (0.991‐0.999) over wide concentration range. Detection limits of the method are in the range of 0.66–1.66 μg L^? and 0.01–0.12 μg kg^? for water and soil samples, respectively.     

Preparation and characterization of metal-organic framework MIL-101(Cr)-coated solid-phase microextraction fiber

Metal-organic frameworks (MOFs) have received great attention as novel sorbents due to their fascinating structures and intriguing potential applications in various fields. In this work, a MIL-101(Cr)-coated solid-phase microextraction (SPME) fiber was fabricated by a simple direct coating method and applied to the determination of volatile compounds (BTEX, benzene, toluene, ethylbenzene, m-xylene and o-xylene) and semi-volatile compounds (PAHs, polycyclic aromatic hydrocarbons) from water samples. The extraction and desorption conditions of headspace SPME (HS-SPME) were optimized. Under the optimized conditions, the established methods exhibited excellent extraction performance. Good precision (<7.7%) and low detection limits (0.32–1.7 ng L⁻¹ and 0.12–2.1 ng L⁻¹ for BTEX and PAHs, respectively) were achieved. In addition, the MIL-101(Cr)-coated fiber possessed good thermal stability, and the fiber can be reused over 150 times. The fiber was successfully applied to the analysis of BTEX and PAHs in river water by coupling with gas chromatography–mass spectrometry (GC–MS). The analytes at low concentrations (1.7 and 10 ng L⁻¹) were detected, and the recoveries obtained with the spiked river water samples were in the range of 80.0–113% and 84.8–106% for BTEX and PAHs, respectively, which demonstrated the applicability of the self-made fiber.     

Silicone glue coated stainless steel wire for solid phase microextraction

A new solid phase microextraction (SPME) fiber based on high-temperature silicone glue coated on a stainless steel wire is presented. The fiber coating can be prepared easily in a few minutes, it is mechanically stable and exhibits relatively high thermal stability (up to 260 °C). The extraction properties of the fiber to benzene, toluene, ethylbenzene, and xylenes (BTEX) were examined using both direct and headspace SPME modes coupled to gas chromatography-flame ionization detection. The effects of the extraction and desorption parameters including extraction and desorption time, sampling and desorption temperature, and ionic strength on the extraction/desorption efficiency have been studied. For both headspace and direct SPME the calibration graphs were linear in the concentration range from 0.5 μg L⁻¹ to 10 mg L⁻¹ (R² > 0.996) and detection limits ranged from 0.07 to 0.24 μg L⁻¹. Single fiber repeatability and fiber-to-fiber reproducibility were less than 6.8 and 21.5%, respectively. Finally, headspace SPME was applied to determine BTEX in petrol station waste waters with spiked recoveries in the range of 89.7-105.2%.     

Analysis of BTEX, PAHs and metals in the oilfield produced water in the State of Sergipe, Brazil

During oil and gas exploitation, large amounts of produced water are generated. This water has to be analyzed with relation to the chemical composition to deduce the environmental impact of its discharge after a treatment process. Therefore, a study was carried out to evaluate preliminarily the BTEX (benzene, toluene, ethylbenzene and xylenes), polycyclic aromatic hydrocarbons (PAHs) and metals contents in produced water samples taken from effluents of the Bonsucesso treatment plant located in the city of Carmópolis, the most important oil and gas producer in the State of Sergipe, North-east of Brazil. Three methods were optimized to determine the target compounds. Polycyclic aromatic hydrocarbons were determined by gas chromatography with mass spectrometric detection (GC/MS), volatile aromatic hydrocarbons (BTEX) by gas chromatography with photoionization detector (GC/PID) and metals were analyzed by flame atomic absorption spectrometry (FAAS). The results showed that concentrations of the target compounds in these samples ranged from 96.7 to 1397 μg L^− 1 for BTEX, from 0.9 to 10.3 μg L^− 1 for PAHs and from 0.003 to 4540 mg L^− 1 for metals.     

Development of a headspace–SPME–GC/MS method to determine volatile organic compounds released from textiles

A method for determining the volatile organic compounds (VOCs) in textiles was developed, by the use of high capacity headspace, solid phase micro extraction (SPME) and gas chromatography–mass spectrometry (GC/MS). The detection targets contained total organic compounds (TVOCs) and six specific substances (toluene, vinylcyclohexene, styrene, 4-phenylcyclohexene, vinylchloride and butadiene), according to Oeko-Tex Standard 100. A designed experiment was used to optimize the headspace–SPME–GC/MS operation, and the method was validated in terms of linearity, limit of detection (LOD) and method precision. It was found that at a loading ratio of 10 m²/m³, the LODs for toluene, vinylcyclohexene, styrene and 4-phenylcyclohexene were 0.0002 mg/m², 0.01 mg/m², 0.01 mg/m² and 0.0001 mg/m² respectively, while for vinylchloride and butadiene they were both 0.08 mg/m². SPME exhibited better adsorption performance for toluene, vinylcyclohexene, styrene and 4-phenylcyclohexene, for which the extraction fractions were 10 times of those for vinylchloride and butadiene. The method developed was successfully applied to analyze several commercial textiles, and would be a simple, efficient and promising technique for the analysis of volatile compounds from textiles or other samples (such as polymer materials).     

Headspace Solid‐Phase Microextraction (HS‐SPME) for the Determination of Benzene,Toluene, Ethylbenzene,and Xylenes (BTEX) in Foundry Molding Sand

Abstract

The use of headspace solid‐phase microextraction (HS‐SPME) to determine benzene, toluene, ethylbenzene, and xylenes (BTEX) in foundry molding sand, specifically a “green sand” (clay‐bonded sand) was investigated. The BTEX extraction was conducted using a 75 µM Carboxen‐polydimethylsiloxane (CAR‐PDMS) fiber, which was suspended above 10 g of sample. The SPME fiber was desorbed in a gas chromatograph injector port (280°C for 1 min) and the analytes were characterized by mass spectrometry. The effects of extraction time and temperature, water content, and clay and bituminous coal percentage on HS‐SPME of BTEX were investigated. Because green sands contain bentonite clay and carbonaceous material such as crushed bituminous coal, a matrix effect was observed. The detection limits for BTEX were determined to be ≤0.18 ng g^?1 of green sand.     

Quantification of benzene,toluene, ethylbenzene and o-xylene in internal combustion engine exhaust with time-weighted average solid phase microextraction and gas chromatography mass spectrometry

A new and simple method for benzene, toluene, ethylbenzene and o-xylene (BTEX) quantification in vehicle exhaust was developed based on diffusion-controlled extraction onto a retracted solid-phase microextraction (SPME) fiber coating. The rationale was to develop a method based on existing and proven SPME technology that is feasible for field adaptation in developing countries. Passive sampling with SPME fiber retracted into the needle extracted nearly two orders of magnitude less mass (n) compared with exposed fiber (outside of needle) and sampling was in a time weighted-averaging (TWA) mode. Both the sampling time (t) and fiber retraction depth (Z) were adjusted to quantify a wider range of C_gas. Extraction and quantification is conducted in a non-equilibrium mode. Effects of C_gas, t, Z and T were tested. In addition, contribution of n extracted by metallic surfaces of needle assembly without SPME coating was studied. Effects of sample storage time on n loss was studied. Retracted TWA–SPME extractions followed the theoretical model. Extracted n of BTEX was proportional to C_gas, t, D_g, T and inversely proportional to Z. Method detection limits were 1.8, 2.7, 2.1 and 5.2 mg m⁻³ (0.51, 0.83, 0.66 and 1.62 ppm) for BTEX, respectively. The contribution of extraction onto metallic surfaces was reproducible and influenced by C_gas and t and less so by T and by the Z. The new method was applied to measure BTEX in the exhaust gas of a Ford Crown Victoria 1995 and compared with a whole gas and direct injection method.     

Solid phase microextraction of volatile organic compounds using carboxen-polydimethylsiloxane fibers

Summary A new 80 μm Carboxen-polydimethylsiloxane (PDMS) fiber for solid phase microextraction (SPME) was tested for the enrichment of volatile organic compounds from water and air. Detection limits between 13 ng L⁻¹ (CH₂Cl₂) and 0.1 ng L⁻¹ (CHCl₂Br and CHClBr₂) for the combination: Carboxen-PDMS fiber and GC-ECD and between 35 ng L⁻¹ and 45 ng L⁻¹ (BTEX compounds) for the combination: Carboxen-PDMS and GC-FID using the headspace procedure were determined. Comparisons with the 100 μm PDMS fiber and further coatings show the advantages of the Carboxen-PDMS fiber with respect to extraction efficiency. Disadvantages of the new fiber compared with the 100 μm PDMS fiber are poorer repeatability and prolongation of equilibrium time. Distribution coefficients of the BTEX compounds between aqueous solution and SPME fiber coating were calculated and compared with the results of other researchers and with octanol-water partition coefficients.     

Determination of a wide range of volatile and semivolatile organic compounds in snow by use of solid-phase micro-extraction (SPME)

Quantification and transformation of organic compounds are pivotal in understanding atmospheric processes, because such compounds contribute to the oxidative capacity of the atmosphere and drive climate change. It has recently been recognized that chemical reactions in snow play a role in the production or destruction of photolabile volatile organic compounds (VOC). We present an environmentally friendly method for determination of VOC and semi-VOC in snow collected at three sites—remote, urban, and (sub-)arctic. A solid-phase micro-extraction (SPME) procedure was developed and (semi-)VOC were identified by gas chromatography with mass spectrometric detection (GC–MS). A broad spectrum of (semi-)VOC was found in snow samples, including aldehydes, and aromatic and halogenated compounds. Quantification was performed for 12 aromatic and/or oxygenated compounds frequently observed in snow by use of neat standard solutions. The concentrations detected were between 0.12 (styrene and ethylbenzene) and 316 μg L⁻¹ (toluene) and limits of detection varied between 0.11 (styrene) and 1.93 μg L⁻¹ (benzaldehyde). These results indicate that the SPME technique presented is a broad but selective, versatile, solvent-free, ecological, economical, and facile method of analysis for (semi-)VOC in natural snow samples.     

Preparation by low-temperature nonthermal plasma of graphite fiber and its characteristics for solid-phase microextraction

Low-temperature nonthermal plasma has been used to prepare solid-phase microextraction (SPME) fibers with high adsorbability, long-term serviceability, and high reproducibility. Graphite rods serving as fiber precursors were treated by an air plasma discharged at 15.2-15.5 kV for a duration of 8 min. Sampling results revealed that the adsorptive capacity of the homemade fiber was 2.5-34.6 times that of a polyacrylate (PA) fiber for alcohols (methanol, ethanol, isopropyl alcohol, n-butyl alcohol), and about 1.4-1.6 times and 2.5-5.1 times that of an activated carbon fiber (ACF) for alcohols and BTEX (benzene, toluene, ethylbenzene, and xylenes), respectively. It is confirmed from FTIR (Fourier transform infrared spectrophotometer) and SEM (scanning electron microscope) analyses that the improvement in the adsorptive performance attributed to increased surface energy and roughness of the graphite fiber. Using gas chromatography (GC)-flame-ionization detector (FID), the limits of detection (LODs) of the alcohols and BTEX ranged between 0.19 and 3.75 μg L⁻¹, the linear ranges were between 0.6 and 35619 μg L⁻¹ with good linearity (R² = 0.9964-0.9997). It was demonstrated that nonthermal plasma offers a fast and simple method for preparing an efficient graphite SPME fiber, and that SPME using the homemade fiber represents a sensitive and selective extraction method for the analysis of a wide range of organic compounds.     

Coupled in-tube and on-fibre solid-phase microextractions for cleanup and preconcentration of organic micropollutants from aqueous samples and analysis by gas chromatography-mass spectrometry

Matrix interference removal is an important step when large volumes of aqueous samples are required to be processed to detect trace levels of analytes. A combination of two sample extraction methods has been used in this work with the aim of cleanup and preconcentration of analytes. For first objective, mild but preferential sorption of a range of analytes has been performed with in-tube solid-phase microextraction (SPME) using polytetrafluoroethylene (PTFE) tubing, and for the second, the eluate from in-tube SPME was subjected to on-fibre SPME using DVB/Caboxen/PDMS (30/50 μm) fibre. Knitting of PTFE tubing created secondary flow pattern that enhanced radial diffusion and retention of organic analytes. Up to 2 mg L⁻¹ of a broad range of substances that are not extracted by PTFE include nitrogen containing aromatic heterocyclic compounds, anilines, phenols and certain organophosphorus pesticides, thus providing a clean extract using this method of sample preparation. The proposed combination of in-tube and on-fibre SPME produced a rectilinear calibration graph over 0.03-150 μg L⁻¹ of a range of analytes using 60 mL of aqueous sample. The overall recovery of analytes was in the range 27-78%. The detection limits were between 6.1 and 21.8 ng L⁻¹. The R.S.D. was in range 5.4-8.2% and 4.2-6.5% in the analysis of respectively 2 and 20 μg L⁻¹ of analytes.     

Solid-phase microextraction and gas chromatography-mass spectrometry for determination of monoaromatic hydrocarbons in blood and urine: Application to people exposed to air pollutants

Summary To assess individual exposure to monoaromatic hydrocarbons (benzene, toluene, ethylbenzene and xylenes-BTEX) in biological fluids, a GC-MS method was developed. Headspace sampling of BTEX was by solidphase microextraction (SPME) with a 75 μm Carboxenpolydimethylsiloxane (PDMS) fiber. Linearity was established for concentrations up to 50 μg L⁻¹. Detection limits, calculated both in human blood and urine, ranged 5–10 ng L⁻¹. Repeatability was in the range 6.5–9.2% for all compounds. The method was applied to the evaluation of the internal dose of BTEX in a group of cyclists running for 2 h within city routes. Benzene and toluene in blood, and toluene and xylenes in urine significantly increased after exercise as compared to prerun values, such changes being consistent with airborne concentrations. The combination of SPME with GC-MS seems to represent an appropriate analytical approach to detect changes in the concentration of monoaromatic hydrocarbons in biological media resulting from exposure to environmental pollution.     

Dynamic non-equilibrium SPME combined with GC, PICI, and ion trap MS for determination of organophosphate esters in air

Methodology for time-weighted average (TWA) air measurements of semivolatile organophosphate triesters, widely used flame-retardants and plasticizers, and common indoor pollutants is presented. Dynamic non-equilibrium solid-phase microextraction (SPME) for air sampling, in combination with GC/PICI and ion trap tandem MS, yields a fast, almost solvent-free method with low detection limits. Methanol was used as reagent gas for PICI, yielding stable protonated molecules and few fragments. A field sampler, in which a pumped airflow over three polydimethylsiloxane (PDMS) 100-μm fibers in series was applied, was constructed, evaluated, and used for the measurements. The method LODs were in the range 2–26 ng m⁻³ for a sampling period of 2 h. The uptake on the SPME fibers was shown to be about five times faster for triphenyl phosphate compared to the other investigated organophosphate esters, most likely due to more lipophilic properties of the aromatic compound. The boundary layer for triphenyl phosphate when using a 100-μm PDMS sorbent was determined to 0.08 mm at a linear air velocity of 34 cm s⁻¹. Five different organophosphate triesters were detected in air from a laboratory and a lecture hall, at concentrations ranging from 7 ng m⁻³ up to 2.8 μg m⁻³.     

Characterization of poly(vinyl chloride) powder produced by emulsion polymerization

The effect of emulsion process formulation ingredients on the morphology, structure, and properties of polyvinyl chloride (PVC) powder has been considered in this study. PVC powder was extracted with ethanol and films were obtained by solvent casting from tetrahydrofurane. Characterization of powders, films, and ethanol extract was performed through FTIR spectroscopy, DSC, AFM, SEM, EDX analysis, methylene blue, and nitrogen adsorption. PVC powder was composed of spheres of a large particle size range from 10 nm to 20 μm as shown by SEM. The specific surface area of the PVC powder was determined as 16 and 12 m² g⁻¹ from methylene blue adsorption at 25 °C and from N₂ adsorption at −196 °C, respectively. AFM indicated the surface roughness of the films obtained by pressing the particles was 25.9 nm. Density of PVC powder was determined by helium pycnometry as 1.39 g cm⁻³. FTIR spectroscopy indicated that it contained carbonyl and carboxylate groups belonging to additives such as surface active agents, plasticizers, and antioxidants used in production of PVC. These additives were 1.6% in mass of PVC as determined by ethanol extraction. EDX analysis showed PVC particles surfaces were coated with carbon-rich materials. The coatings had plasticizer effect since, glass transition temperature was lower than 25 °C for PVC powder and it was 80 °C for ethanol extracted powders as found by using differential scanning calorimetry. These additives from polymerization process made PVC powder more thermally stable as understood from Metrom PVC thermomat tests as well.     

In-Groove Carbon Nanotubes Device for SPME of Aromatic Hydrocarbons

A new solid phase microextraction (SPME) fibre using carbon nanotubes as fibre coating incorporated into a groove of a stainless steel rod is suggested. It is mechanically stable and exhibits relatively high thermal stability (up to 280 °C). The coating showed especially good extraction efficiency for aromatic hydrocarbons. The extraction properties of the fibre to benzene, toluene, ethylbenzene and o-xylene were examined using both direct and headspace SPME modes coupled to gas chromatography-flame ionization detection. The parameters affecting the extraction efficiency (extraction temperature and time, salt addition, desorption temperature and time) were investigated and quality parameters were measured under the optimized conditions. For both headspace and direct SPME the calibration graphs were linear up to 100 mg L⁻¹ (R ² > 0.996) and detection limits ranged from 0.09 to 0.39 μg L⁻¹. The repeatabilities were 5.9–13.3%. The proposed coating was applied for aromatic hydrocarbons determination in petrol station waste waters.     

Bis (trans-cinnamaldehyde) ethylene diimine dibromonickel (II) complex as a neutral carrier for salicylate-selective liquid membrane and coated graphite sensors

A salicylate PVC-based membrane (SPME) and a coated graphite membrane (SCGE) electrodes by using a new tetracoordinate organonickel complex as ion carrier were prepared. Both sensors show a Nernstian response to salicylate ions over a very wide concentration ranges (1.0×10⁻⁵-1.0×10⁻¹ M for SPME and 1.0×10⁻⁶-1.0×10⁻² M for SCGE) in the pH of 7.0. The best selectivities were obtained for the membrane incorporating 30% PVC, 63% plasticizer, 2% cationic additive and 5% ionophore. The electrodes possess satisfactory reproducibility, very short response time (∼10 s) in the whole concentration ranges, and excellent discriminating ability for salicylate ions with respect to the most common organic and inorganic anions. The detection limits of proposed sensors are 5.0×10⁻⁶ and 7.0×10⁻⁷ M for SPME and SCGE, respectively. The electrodes were successfully used for determination of salicylate in biological samples.     

Semi-automated in vivo solid-phase microextraction sampling and the diffusion-based interface calibration model to determine the pharmacokinetics of methoxyfenoterol and fenoterol in rats

In vivo solid-phase microextraction (SPME) can be used to sample the circulating blood of animals without the need to withdraw a representative blood sample. In this study, in vivo SPME in combination with liquid–chromatography tandem mass spectrometry (LC–MS/MS) was used to determine the pharmacokinetics of two drug analytes, R,R-fenoterol and R,R-methoxyfenoterol, administered as 5 mg kg⁻¹i.v. bolus doses to groups of 5 rats. This research illustrates, for the first time, the feasibility of the diffusion-based calibration interface model for in vivo SPME studies. To provide a constant sampling rate as required for the diffusion-based interface model, partial automation of the SPME sampling of the analytes from the circulating blood was accomplished using an automated blood sampling system. The use of the blood sampling system allowed automation of all SPME sampling steps in vivo, except for the insertion and removal of the SPME probe from the sampling interface. The results from in vivo SPME were compared to the conventional method based on blood withdrawal and sample clean up by plasma protein precipitation. Both whole blood and plasma concentrations were determined by the conventional method. The concentrations of methoxyfenoterol and fenoterol obtained by SPME generally concur with the whole blood concentrations determined by the conventional method indicating the utility of the proposed method. The proposed diffusion-based interface model has several advantages over other kinetic calibration models for in vivo SPME sampling including (i) it does not require the addition of a standard into the sample matrix during in vivo studies, (ii) it is simple and rapid and eliminates the need to pre-load appropriate standard onto the SPME extraction phase and (iii) the calibration constant for SPME can be calculated based on the diffusion coefficient, extraction time, fiber length and radius, and size of the boundary layer. In the current study, the experimental calibration constants of 338.9 ± 30 mm⁻³ and 298.5 ± 25 mm⁻³ are in excellent agreement with the theoretical calibration constants of 307.9 mm⁻³ and 316.0 mm⁻³ for fenoterol and methoxyfenoterol respectively.     

Titanium dioxide nanotube fiber using in headspace solid-phase microextraction with GC–MS for BTEX detection

Anodized TiO₂ nanotube fibers using in-headspace solid-phase microextraction (SPME) with gas chromatography–mass spectrometry (GC–MS) have been exploited as an analytical method for volatile organic compounds such as benzene, toluene, ethylbenzene, and xylenes (BTEX) detection. The factors of anodizing time and annealing temperature for TiO₂ nanotube production are studied and the adsorption factors (time, ionic strength, and temperature) and desorption factors (time and temperature) for BTEX analysis are optimized. The limit of detections (LODs) for benzene, toluene, ethylbenzene o-xylene, and m, p-xylene are 0.5, 0.1, 1.0, 1.0, and 2.0 μg L⁻¹, respectively. The linear ranges for BTEX (0.5–15,000 μg L⁻¹) and satisfactory linearity (R² ≥ 0.9954) are obtained. This method is successfully applied in real samples with the recoveries ranging from 92% to 97%. TiO₂ nanotube fiber is a promising technique for BTEX analysis.     

Extraction and percolation of PAEs from chemical protective gloves

Phthalates (PAEs) have high solubility in polymers and are added as plasticisers to increase the flexibility and plasticity of polymeric materials. In this study, methanol, hexane, ethyl ether and acetone were used for the extraction of PAEs from chemical protective gloves at temperatures of 20–80 °C. DEHP (di-2-ethylhexyl phthalate) and DBP (di-n-butyl phthalate) were extracted from neoprene, nitrile and PVC glove samples using the above four solvents. The extraction level of DEHP from the glove samples was proportional to the Log K_ow values of the extraction solvents. This result implied that PAEs were more soluble in non-polar solvents and were likely to be extracted from the gloves. Increasing the extraction temperature resulted in a higher extraction of DBP and DEHP from the gloves. In the ASTM F739 permeation method, the aromatic solvents permeated through the glove samples and dissolved DEHP. If the permeant and DEHP had similar solubility parameters, DEHP was likely to be leached from the gloves. The modelling results indicated that the permeation behaviour of the organic solvent in the PVC glove was non-Fickian diffusion. It was speculated that the plasticiser increased the diffusion coefficients of the permeants in the PVC gloves. This study suggested that the potential dissolution and leaching of PAEs from chemical protective gloves should be a concern for workers who handle organic solvents.