Carbon Sphere@Nickel sulfide core-shell nanocomposite for high performance supercapacitor application

The Carbon sphere@Nickel sulfide core-shell nanocomposites for different mole ratios of Carbon sphere (0:1; 0.5:1 and 1:1) have been synthesized by a facile low temperature water-bath method without any further calcination. XRD studies on the core-shell nanocomposites show that characteristic peaks associated with rhombohedral phase structure of nickel sulfide have been retained. TEM morphology presents the interlinked core-shell of Carbon sphere@Nickel sulfide composite with grass-leaf dexterity for better ionic diffusion. BET study confirms the formation of mesoporous structure with high surface area. The existence of elements and its electronic configuration is noted through XPS. The electrochemical studies on pristine nickel sulfide and its Carbon sphere@Nickel sulfide core-shell composites reveal that Carbon sphere@Nickel sulfide (0.5:1) exhibits high specific capacitance of 1022?F?g^?1 at a current density of 1?A?g^?1. It shows good cyclic performance even beyond 4000 consecutive charge/discharge cycles at a relatively high current density of 20?A?g^?1 with the ～83% of retention.     

Electrodeposition of nanostructured catalysts for electrochemical energy conversion: Current trends and innovative strategies

This review discusses the latest advances in electrodeposition of nanostructured catalysts for electrochemical energy conversion: fuel cells, water splitting, and carbon dioxide electroreduction. The method excels at preparing efficient and durable nanostructured materials, such as nanoparticles, single atom clusters, hierarchical bifunctional combinations of hydroxides, selenides, phosphides, and so on. Yet, in most cases, chemical composition cannot be decoupled from catalyst morphology. This compromises the rational design of electrodeposition procedures because performance indicators depend on both morphology and surface chemistry. We expect electrodeposition will keep unraveling its potential as the preferred method for electrocatalyst synthesis once a deeper understanding of the electrochemical growth process is combined with complex chemistries to have control of the morphology and the surface composition of complex (bifunctional) electrocatalysts.     

Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

Highly Sensitive Electrochemical Immunosensor Based on Mesoporous PdPt Nanoparticles Anchored on a Three-dimensional PANI@CNTs Network as Nanozyme Labels

In this study, a novel strategy to amplify electrochemical signals by mesoporous PdPt nanoparticles with core-shell structures anchored on a three-dimensional PANI@CNTs network as nanozyme labels (PdPt/PANI@CNTs) was proposed for the sensitive monitoring of α-fetoprotein (AFP, Ag). First, the mesoporous PdPt nanoparticles prepared by a facile chemical reduction method had excellent biocompatibility with biomolecules, which could capture a large amount of AFP-Ab₂ (Ab₂) and exhibit plentiful pores to entrap more thionine (Thi) into mesoporous PdPt nanoparticles with enhanced loading and abundant active sites. Furthermore, the resulting mesoporous PdPt nanoparticles were abundantly dotted on the surface of a three-dimensional PANI@CNTs network with excellent conductivity and a high specific surface area through the bonding of the amino group to form PdPt/PANI@CNTs nanozyme labels. Most importantly, the as-prepared PdPt/PANI@CNTs nanozyme labels exhibited unexpected enzyme-like activity towards the reduction of hydrogen peroxide owing to the highly indexed facets, enhancing the current response to realize signal amplification. In view of the advantages of nanozyme labels and the involvement of gold nanoparticles (AuNPs, which behave as electrode materials) for the sensitive determination of AFP, the as-developed immunosensor could obtain a dynamic working range of 0.001 ng mL^−1–100.0 ng mL⁻¹ at a detection limit of 0.33 pg mL⁻¹ via DPV (at 3σ). Furthermore, the nanozyme-based electrochemical immunosensor exhibited remarkable analytical performance, which brought about feasible ideas for disease diagnosis in the future.     

ZIF-derived mesoporous carbon materials prepared by activation via Na2SiO3 for supercapacitor

Metal organic frameworks (MOFs) derived carbonaceous materials have a wide range of applications in the fields of energy storage, catalysis, adsorption and separation, etc. Especially, zeolitic imidazolate framework-8 (ZIF-8) is an excellent candidate to synthesize porous carbon due to the large surface area and high nitrogen content. However, the dominated microporous structure of ZIF-8-derived carbon significantly hinders ionic mass transfer, limiting the improvement of performance. Herein, MOF-derived mesoporous carbon was prepared using ZIF-8 as carbon precursor and cheap sodium silicate (Na₂SiO₃) as activator. The introduction of Na₂SiO₃ created rich mesoporous structure and increased specific surface area, as well as the effects of pyrolysis temperature and Na₂SiO₃ dosage on performance was also investigated. The obtained ZIF-derived porous carbon exhibits good electrochemical performance with specific capacitance of 263 F/g at 1 A/g and excellent cycle life (96.07% after 10,000 GCD cycles) in supercapacitor. The use of cheap Na₂SiO₃ activator provides a new orientation for the preparation of MOF-derived carbons with rich pores, high surface area, and facilitates the large-scale application of MOF-derived carbons.     

超薄骨架有序介孔CdS/NiS的制备及光催化产氢性能

采用有序介孔氧化硅为硬模板, 通过纳米浇筑法制备了由螺旋骨架构建的有序介孔硫化镉(CdS)光 催化材料. 该光催化材料具有约5 nm厚的超薄骨架和大的比表面积(238 m²/g), 能有效缩短光催化反应中 光生电荷迁移到表面进行反应的距离并同时提供更多的反应活性位点, 从而增强光催化性能. 通过原位化学沉积法将不同量的助催化剂硫化镍(NiS)沉积到有序介孔CdS表面, 得到了一系列超薄骨架有序介孔CdS/NiS复合光催化材料. 可见光照射下的光催化产氢活性测试结果表明, 负载适量NiS的有序介孔CdS具有显著增强的光催化产氢活性(3.84 mmol?h^-1?g^-1), 约为负载相同量NiS的普通商业化CdS材料(0.22 mmol?h^-1?g^-1)的17.5倍.     

Synthesis and application of mesoporous molecular sieve for miniaturized matrix solid‐phase dispersion extraction of bioactive flavonoids from toothpaste,plant, and saliva

This article describes the use of the mesoporous molecular sieve KIT‐6 as a sorbent in miniaturized matrix solid‐phase dispersion (MSPD) in combination with ultra‐performance LC for the determination of bioactive flavonoids in toothpaste, Scutellariae Radix, and saliva. In this study, for the first time, KIT‐6 was used as a sorbent material for this mode of extraction. Compared with common silica‐based sorbents (C18 and activated silica gel), the proposed KIT‐6 dispersant with a three‐dimensional cubic Ia3d structure and highly ordered arrays of mesoporous channels exhibits excellent adsorption capability of the tested compounds. In addition, several experimental variables, such as the mass ratio of sample to dispersant, grinding time, and elution solvent, were optimized to maximize the extraction efficiency. The proposed analytical method is simple, fast, and entails low consumption of samples, dispersants and elution solvents, thereby meeting “green chemistry” requirements. Under the optimized conditions, the recoveries of three bioactive flavonoids obtained by analyzing the spiked samples were from 89.22 to 101.17%. Also, the LODs and LOQs for determining the analytes were in the range of 0.02–0.04 μg/mL and 0.07–0.13 μg/mL, respectively. Finally, the miniaturized matrix solid‐phase dispersion method was successfully applied to the analysis of target solutes in real samples, and satisfactory results were obtained.     

有序介孔三氧化二铟/还原氧化石墨烯纳米复合材料的制备及可见光催化性能

以有序介孔三氧化二铟(m-In2O3)和还原氧化石墨烯(RGO)为原料,采用紫外光照射法合成了介孔三氧化二铟/还原氧化石墨烯(m-In2O3-RGO)复合光催化剂.利用N2吸附-脱附、X射线衍射(XRD)、透射电子显微镜(TEM)、漫反射吸收光谱(DRS)和光电流测试等手段对样品进行表征.在可见光照射下,以对氯苯酚(4-CP)为目标污染物,考察了m-In2O3-RGO光催化剂的催化性能.结果表明,m-In2O3-RGO光催化剂具有完整的晶型和规则的孔道结构,有利于光生电子和空穴的分离.同时,作为固态电子受体与传输体的RGO促进了光生电子-空穴对的传输和分离,有效提高了可见光催化性能.掺杂2%(质量分数)RGO的复合光催化剂性能最佳,4 h可将4-CP降解96%以上,催化剂经多次循环使用后,其光催化活性基本保持不变.     

自下而上法制备金-介孔二氧化硅复合纳米管用作还原4-硝基苯酚的催化剂

采用自下而上方法制备了金-介孔二氧化硅复合纳米管,其中金纳米粒子作为催化剂嵌在介孔二氧化硅纳米管管壁内侧。金纳米颗粒的团聚、脱落和晶粒尺寸生长都可以被有效限制,而且催化剂负载量和尺寸大小均可实现简单控制。管壁中的介孔孔道、纳米管末端开口以及一维中空管道可以协同促进反应物扩散,从而提高4-硝基苯酚还原反应活性。循环实验证明这种复合纳米管催化剂具有良好的可重复使用性,而且在反应过程中未出现金纳米粒子脱落或团聚现象。     

介孔Fe-Cu复合金属氧化物纳米粉催化剂催化低温CO氧化

以环氧丙烷为凝胶剂,采用简便低廉的无表面活性剂的溶胶-凝胶法制备了一系列不同Cu/Fe摩尔比的高比表面积介孔Fe-Cu复合氧化物纳米粉末。运用微反应器-色谱体系考察了它们在低温CO氧化反应中的催化性能。采用X射线衍射、N2吸附-脱附、热重-差热分析、程序升温还原、傅里叶变换红外光谱和透射电镜对所制样品进行了表征。结果表明,这些介孔Fe-Cu复合氧化物催化剂具有纳米晶结构、窄的孔径分布和高的比表面积,在低温CO氧化反应中表现出高的活性和稳定性。 CuO的添加影响了Fe2O3的结构和催化性能。当CuO含量为15 mol%时,催化剂具有最高的比表面积和催化活性,在低温CO氧化反应中表现出较高的催化稳定性。