Surface Chemistry and Catalytic Reactivity of Borocarbonitride in Oxidative Dehydrogenation of Propane

Borocarbonitride (BCN) materials are newly developed oxidative dehydrogenation catalysts that can efficiently convert alkanes to alkenes. However, BCN materials tend to form bulky B₂O₃ due to over-oxidation at the high reaction temperature, resulting in significant deactivation. Here, we report a series of super stable BCN nanosheets for the oxidative dehydrogenation of propane (ODHP) reaction. The catalytic performance of the BCN nanosheets can be easily regulated by changing the guanine dosage. The control experiment and structural characterization indicate that the introduction of a suitable amount of carbon could prevent the formation of excessive B₂O₃ from BCN materials and maintain the 2D skeleton at a high temperature of 520 °C. The best-performing catalyst BCN exhibits 81.9 % selectivity towards olefins with a stable propane conversion of 35.8 %, and the propene productivity reaches 16.2 mmol h⁻¹ g⁻¹, which is much better than hexagonal BN (h-BN) catalysts. Density functional theory calculation results show that the presence of dispersed rather than aggregated carbon atoms can significantly affect the electronic microenvironment of h-BN, thereby boosting the catalytic activity of BCN.     

掺杂剂对聚乙炔中电荷密度波的影响

用CNDO／2方法研究了各种掺杂剂对聚乙炔中电荷密度波的影响，在掺杂剂附近的碳原子上出现较大的电荷密度，且p型比n型掺杂剂的影响更大，讨论了电荷波与导电性的关系。     

Synthesis,identification and study of electrical conductivity of the doped copolymer carbazole–phenol formaldehyde

The copolymer carbazole–phenol formaldehyde doped with 4 (4-hydroxy-phenyl azo)-benzene sulfonic acid (PABS), 2,5-dimethyl benzene sulfonic acid (PXSA) and 4-hydroxy-m-benzene disulfonic acid (PDSA) were prepared. These compounds are identified by FT-IR spectroscopy.The conductivity of copolymer carbazole–phenol formaldehyde doped with 4 (4-hydroxy-phenyl azo)-benzene sulfonic acid (PABS), 2,5-dimethyl benzene sulfonic acid (PXSA) and 4-hydroxy-m-benzene disulfonic acid (PDSA) was studied as a function of weight of the dopant compounds; an increase of conductance of the copolymer by doping with PABS is noted; the conductance became equal to 0.000595 ohm⁻¹ for 0.1 g higher conductance for the copolymer when it is doping with PABS.     

1 550 nm波长PNP型InGaAsP-InP异质结晶体管激光器材料设计与外延生长

基于器件模拟仿真,设计了一种PNP型1.5 μm 波长多量子阱InGaAsP-InP异质结晶体管激光器材料外延结构,并采用金属有机化学气相沉积外延生长.其中基区采用N型Si掺杂.因为扩散系数小,比较P型Zn搀杂具有较高的稳定性,因而较NPN结构外延材料容易获得高质量的光学有源区.由于N型欧姆接触比P型容易获得,基区搀杂浓度可以相对较低,有利于减小基区光损耗和载流子复合,从而获得较低的阈值电流和较高的输出光功率.所获得的外延材料呈现较高光-荧光谱峰值和65.1 nm较低半峰宽.测试结果显示了较高的外延片光学质量.     

Boron segregation control in silicon crystal ingots grown in Czochralski process

Boron-doped silicon single crystals of 207 mm diameter with various growing conditions are grown from a large amount of the melt in the cusp-magnetic Czochralski method, and the effects of growing parameters on dopant concentrations in the crystals are experimentally investigated. Equilibrium distribution coefficient of boron calculated by BPS model is 0.716. With the crystal rotation (ω) of 13 rpm and the crucible rotation of , the effective distribution coefficient (k_e) is 0.751 in zero magnetic strength and increases up to 0.78 in the magnetic strength of 640 G. For , there is no significant influence of ω on k_e. With , k_e is almost unity. The experimental results are compared with theory.     

Atmospheric pressure photoionization mass spectrometry as a tool for the investigation of the hydrolysis reaction mechanisms of phosphite antioxidants

The hydrolysis reaction mechanism of phosphite antioxidants is investigated by liquid chromatography-mass spectrometry (LC/MS). The phosphites were chosen because they differed in chemical structure and phosphorus content. Dopant assisted-atmospheric pressure photoionization (DA-APPI) is chosen as the ion source for the ionization of the compounds. In our previous work, DA-APPI was shown to offer an attractive alternative to atmospheric pressure chemical ionization (APCI) since it provided background-ion free mass spectra and higher sensitivity [M. Papanastasiou, et al., Polymer Degradation and Stability 91 (11) (2006) 2675–2682]. In positive ion mode, the molecules are generally detected in their protonated form. In negative ion mode, the phosphites are unstable and only fragment ions are observed; these however, are characteristic of each phosphite and may be used for the identification of the analytes in complex mixtures.The analytes under investigation are exposed to accelerated humid ageing conditions and their hydrolytic pathway and stability is investigated. Different substituents around the phosphorus atom are shown to have a significant effect on the stability of the phosphites, with phenol substituents producing very hydrolytically stable structures. Alkanox P24 and PEP-36 follow a similar hydrolytic pathway via the scission of the first and then the second PO_phenol bonds, eventually leading to the formation of phenol, phosphorous acid and pentaerythritol as end products. HP-10 exhibits a rather different structure and the products detected suggest scission of either the PO_hydrocarbon or one of the PO_phenol bonds. A phenomenon similar to that of autocatalysis is observed for all phosphites and is attributed to the formation of dialkyl phosphites as intermediate products.     

A molecular dynamics study of ion migration in a doped electroactive polymer

Simulating the \hbox{BF}_{4}^{-} -doped poly(3-octylthiophene) lattice by molecular dynamics results in a structure in which dopant ions intercalate as a sandwich between thiophene rings on adjacent polymer chains. The ions occupy sites in channels parallel to the polymer main chain, which retains a high degree of planarity in contrast to the pristine (undoped) polymer. Even when lattice imperfections are created by expanding the cell, Coulomb forces ensure that the intercalation features containing the dopant channels are largely retained. On applying electric fields in the principal directions of the 'perfect lattice' it is found that the ions migrate most readily along the ion-channel directions (the lattice c axis), leaving the lattice undisturbed. Although higher electric fields cause dopant migration to occur perpendicular to the channel directions they destroy the intercalated lattice. In the reduced-order lattice regions substantial motion of the ions are predicted at a critical value of the lattice parameter.     

控制CO选择氧化反应中金催化剂热点形成的新方法

采用沉积-沉淀法制备了Al2O3和MOx-Al2O3(M=Fe,Zn)负载型金催化剂.室温下对其CO氧化及富氢条件下CO选择氧化催化活性进行了广泛的研究.催化剂床层温度由热电偶直接测定.催化剂表面温度与O2/CO的体积比以及CO和H2的浓度密切相关.在CO氧化反应过程中Au/Al2O3催化剂的温度可高达170°C,添加FeOx可使其降至55°C.利用一系列仪器(X射线衍射仪,X射线光电子能谱仪和透射电镜等)对催化剂的结构进行了表征.结果显示Al2O3负载型金催化剂热点的形成可以通过添加合适的助剂很好地控制.助剂的添加能够使催化剂活性中心由金属态Au变为AuIII,从而导致了CO选择氧化反应机理不同.