THE SYNTHESIS OF MODIFIED DIPHENYL OXIDE RESIN

1. INTRODUCTION Poly (diphenyl oxide) (DPO) resins are a series of heat-resisting thermosetting resins. In 1960s, the West House Company applied them to make H class insulting materials and got an extensive use successfully [1]. But due to the three main…     

Recent advances in polymer monoliths for ion-exchange chromatography

The use of polymeric materials in ion-exchange chromatography applications is advantageous because of their typically high mechanical stability and tolerance of a wide range of pH conditions. The possibility of using polymeric monoliths in ion-exchange chromatography is therefore obvious and many of the same strategies developed for polymeric particles have been adapted for use with polymeric monoliths. In this review different strategies for the synthesis of polymeric monoliths with ion-exchange functionality are discussed. The incorporation of ion-exchange functionality by co-polymerization is included, as also are different post-polymerization alterations to the monolith surface such as grafting. The formulations and strategies presented include materials intended for use in analytical separations in ion-exchange chromatography, sample pre-treatment or enrichment applications, and materials for capillary electrochromatography. Finally, examples of the use of polymeric monoliths in ion-exchange chromatography applications are included with examples published in the years 2003 to 2008.

共缩聚聚酰胺胶囊的制备及其性质的研究

界面缩聚法是制备微胶囊的常用办法之一,在医药、农药、生物工程等各个领域得到了广泛的研究与应用.此法制备聚酰胺胶囊具有制备方法简单、缩聚速度快、囊壁孔隙大等优点.在制备胶囊时,一般以一种二元胺或多元胺作为水溶性单体,制备的微胶囊存在很大的缺陷.当用二元胺作为水溶性单体时,得到具有线型结构的聚酰胺胶囊,囊壁的机械强度差.采用多元胺作为水溶性单体时,反应深度小,制备的胶囊囊壁薄、孔隙小.我们采用二元胺和多元胺的混合物作为水溶性单体,得到了不规则缩聚的共缩聚胶囊.改变二元胺与多元胺的比例,改善囊壁的机械强度和对KCl 的渗透系数,从而制备出具有较高机械强度和较大渗透系数的胶囊,以适应实际应用中对芯材控制释放的要求.     

A novel alkenyl-substituted ansa-zirconocene complex with dual application as olefin polymerization catalyst and anticancer drug

The alkenyl substituted fulvene compound, (C₅H₄)CMe(CH₂CH₂CHCMe₂) (1), reacts with one equivalent of LiMe to give the lithium derivative Li{C₅H₄(CMe₂CH₂CH₂CHCMe₂)} (2). The reaction of 2 with Me₂Si(C₅Me₄H)Cl gave the ansa-ligand precursor Me₂Si(C₅Me₄H)(C₅H₄(CMe₂CH₂CH₂CHCMe₂)) (3), which after the subsequent reaction with 2 equivalents of LiBuⁿ yielded the dilithium salt Li₂{Me₂Si(C₅Me₄)(C₅H₃(CMe₂CH₂CH₂CHCMe₂))} (4). The alkenyl-substituted zirconocene complex [Zr{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃(CMe₂CH₂CH₂CHCMe₂))}Cl₂] (5) was synthesized by the equimolar reaction of 4 and ZrCl₄. 5 was characterized by spectroscopic methods and by single crystal X-ray diffraction studies. The zirconocene compound 5 has been tested as a catalyst in the polymerization of ethylene at different temperatures and Al:Zr ratios, and also in the co-polymerization of ethylene and 1-octene, observing modest co-monomer incorporations. In addition, the cytotoxic activity of 5 was tested against tumour cell lines 8505C anaplastic thyroid cancer, A253 head and neck tumour, A549 lung carcinoma, A2780 ovarian cancer and DLD-1 colon carcinoma. Complex 5 showed the best cytotoxic activity on A2780 ovarian cancer (IC₅₀ value of 36.8 ± 5.9 μM). This represents the highest reported cytotoxic activity of a zirconocene complex on A2780 ovarian cancer. In addition, the cytotoxic activities of 5, have been compared with those obtained using cisplatin.     

基于不同碱基含量的[FeFe]-氢化酶模型化合物功能化聚合物的合成与表征

将含二炔基的[2Fe2S]模型化合物[Fe2(μ-SCH2C≡CH)2(CO)6](A)和双叠氮单体2,6-(N3CH2)Py(B,Py=吡啶)与含碱性基团的双炔单体(2-Py CH2)N(CH2C≡CH)2(C,Py=吡啶)通过"点击反应"以不同比例进行共聚,得到了6种含不同碱基量的[FeFe]-氢化酶模型化合物功能聚合物Polymer-1~Polymer-6。通过红外光谱、硫元素分析、热重、扫描电镜和电化学对这些聚合物进行了表征。红外光谱和电化学研究表明二铁六羰基单元A以二铁五羰基的形式存在于聚合物中。在共聚过程中,增加单体C的含量能显著改变聚合物的形貌和增加其在有机溶剂中的溶解度,同时热稳定性也有所增加。这些聚合物在含有醋酸的DMF介质中催化质子还原的行为表明,通过单体C引入的碱性基团所形成的次级配位环境对二铁中心的催化性能有显著影响。     

Revised particle growth model for supported metallocene catalyst co-polymerization

In this paper, a revised version of the particle growth model (PGM) describing olefin co-polymerization with metallocene catalysts is proposed. The model is used to calculate the reaction rate of hexane–propylene co-polymerization under different operating conditions. Results are compared with experimental data obtained by calorimetric technique in order to validate the model. Good agreement between calculated and experimental results is shown.     

Half-Titanocene chlorides 2-(benzimidazol-2-yl)quinolin-8-olates: Synthesis, characterization and ethylene (co-)polymerization behavior

 A series of half-titanocene chloride 2-(benzimidazol-2-yl)quinolin-8-olates C1-C6 were synthesized by treating the lithium salts of the ligand with CpTiCl₃. All the complexes were characterized by ¹H-NMR, ¹³C-NMR and elemental analyses, and the crystal structure of C3 and C6 was measured by X-ray. These half-titanocene complexes showed moderate catalytic activities toward ethylene polymerization (up to 1840 kg·mol^-1(Ti)·h^-1) when activated with MMAO, affording the high molecular weight polymers. And they also exhibited good activity for copolymerization of ethylene and α-olefin with low content of co-monomer.     

Processable heat resistant polyamides containing tetraphenyl thiophene having pendant phenyl moiety with heterocyclic quinoxaline unit: Synthesis and characterization

A series of new polyamides containing tetraphenyl thiophene having pendant phenyl moiety with heterocyclic quinoxaline unit were synthesized by using the solution polycondensation method of novel diamine monomer V with isopthaloyl chloride (IPC) and terpthaloyl chloride (TPC) in various mole proportions. These novel polymers were characterized by FT-IR, solubility, inherent viscosity, thermal analysis and X-ray diffraction studies. Inherent viscosities of these polymers were in the range 0.66 to 1.44 dL/g indicating moderate to high molecular weight built-up. These polymers exhibited solubility in various solvents such as DMAc, NMP, pyridine, m-cresol etc. X-ray diffraction pattern of polymers showed that introduction of pendant phenyl moiety would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA and DSC showed excellent thermal stability of polymers. The structure -property correlation among these polyamides were studied, in view of these polymer's potential applications as processable high temperature resistance materials.     

Nanostructured ultra-low-κ porous fluoropolymer composite films via plasma co-polymerization of hydrophobic and hydrophilic monomers and subsequent hydrolysis treatment

A new approach to fabricate porous nanostructured fluoropolymer composite films with a low dielectric constant (κ) was put forward at the first time. Initially, a film (pp-HDFD-PEGMA film) composed of dense, uniform, and well-defined nanospheres was controllably deposited on hydrogen-terminated silicon substrates by simultaneous plasma polymerization and deposition of a fluorine-containing hydrophobic monomer, 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-1-decene (HDFD), and a hydrophilic monomer poly(ethylene glycol) methacrylate (PEGMA), using a pulsed plasma polymerization technique. Then, by hydrolysing the plasma co-deposited film in aqueous hydrochloric acid solution to effectively remove the soluble nanospheres or fragments which mainly derived from PEGMA, a nanoporous fluorocarbon film was achieved. Subsequently, a top poly(tetrafluoroethylene) layer was deposited via the magnetron sputtering process to cap and complete an encapsulated structure. The resulting bilayer composite film consisting of a layer of nanostructured fluorocarbon porous film and a layer of encapsulation fluorocarbon polymer has a κ value of 1.8. The morphology investigation of the plasma co-deposited film prior and after acid-treatment by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) confirmed the form of the nanospheres and nanoporous structure, while the chemical composition and structure analysis by X-ray photoelectron spectroscopy (XPS) revealed that after the acid-treatment, the porous nanostructured film are composed predominantly of mainly fluorocarbon polymer.     

Quantitative evaluations of surface-concentrated amino groups on monolithic-type solid supports prepared by copolymerization method

We have prepared novel monolithic-type highly cross-linked solid supports having surface amino group using a copolymerization method of functional monomers and cross-linking monomer. From the view point of controlled surface functionalities, we have firstly certified and proved quantitative determination methods of the surface amino groups to utilize and evaluate those solid supports prepared as affinity resins. We utilized a typical titration method and ninhydrin method that have been effectively utilized for quantitative determination of primary amine and amino acid. The ninhydrin method was calibrated using octylamine as a standard compound (R ² = 0.998) and proved applicability for the quantitative determination of other primary amines. A commercially available solid support, Affigel, was able to be quantitatively evaluated only by the ninhydrin method, while Toyopearl afforded just compatible amino group density to the value certified by the manufacturer only through titration method. The obtained incompatible results using both determination methods have been unclear at this moment. On the other hand, both determination methods afforded compatible amino group density of the prepared solid support. The obtained value was up to 126 μmol/ml, which was 94% of the calculated theoretical value based on the feed composition. The results suggested surface-concentrated introduction of amino groups. Based on the determination methods, especially ninhydrin method, we prepared the monolithic-type solid supports having various densities of surface amino groups and proved quantitative and surface-concentrated introduction of amino groups. Those amino groups were able to react with a relatively large ligand molecule, methotrexate, quantitatively and also with controlled density. The obtained results strongly suggest that the novel monolithic-type solid supports have possible advantages when we utilize those as affinity resins for target peptide analyses.