GC-MS技术在舰船胶粘材料毒性评价中的应用

胶粘材料简称胶粘剂、粘合剂、粘结剂、接着剂。因其能把各种材料紧密地粘合在一起,并具有各种良好的性能,因而广泛地应用于海军舰船的制造及维修中。应用GC-MS技术对在使用环境及条件下其释放物及高温热解物的定性分析是对其进行使用过程中毒性评价的重要步骤。1实验部分1.1仪器与材料仪器:JMS-D300(日本JEOL);PIATFORMⅡGC-MS。     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.     

化学镀非晶态Ni—P层的初期沉积过程研究

化学镀非晶态Ｎｉ－Ｐ镀层初期沉积过程和沉积层状态是影响结合强度的决定性因素．对不同基体材料初期沉积的观察发现，有些非晶态镀层的初期沉积中含有微晶．微晶的产生与否与基体材料以及镀层材料晶格的错配度有关，当镀层与基体材料点阵常数相差不大，镀层的初期沉积沿基体晶格外延生长出现微晶层，反之，点阵常数相差较大时，初期沉积物中未发现微晶．     

生物特异性功能高分子

模仿天然生物活性高分子关键作用点的化学组成，在高分子链上接上各种官能团或化学残基，制备具有与该天然高分子相似生物活性的高分子，即生物特异性功能高分子。本文主要介绍拟肝素高分子和似粘连 蛋白高分子两种生物特异性功能高分子。     

Phase-Separation Phenomena of Copolymer Solutions and Fractionation of Copolymers by Chemical Composition

Precipitation temperature-total polymer concentration diagrams for toluene solutions of two styrene-acrylonitrile copolymers different in chemical composition and their mixtures were determined and then triangular phase diagrams of this system were constructed from these diagrams. It is speculated from the triangular phase diagrams and experimentally shown that the copolymer may be effectively fractionated by chemical composition in this system.     

Properties of Aqueous Polyurethane Dispersion Modified by Epoxide Resin and Their Use as Adhesive

The aqueous polyurethane hybrid dispersion modified by the epoxy resin were synthesized using 1,4-butanediol ( BDO ) and dimethylolpropionic(DMPA) as chain extenders. A kind of automobile interior decoration adhesive was made by the modified hybrid dispersions. Effects of the content and the kinds of epoxide resin on the properties of dispersions and dispersion-cast films such as appearance, pot life, viscosity, particle size, molecular mass, hardness, swelling in water, contact angle, strength of stress, elongation at break, and other mechanical properties were studied. At the same time the effect of the E20 content on the peel strength of the adhesive for several automobile interior decoration substrates such as rubber/wood, poly(vinyl chloride)/wood; leather/wood, sponge/wood was investigated. The experimental results show that when the epoxy resin E20 content was 8%, the modified polyurethane hybrid dispersions possess better properties and the adhesive made by the modified dispersions posses better adhesion for automobile interior decoration substrates. The stress-strain curve of the modified aqueous polyurethane hybrid dispersions films shows the modified aqueous cast films possess better rigidity and toughness.     

On the relationship between the work of adhesion and the critical shear stress for the onset of flow instabilities

The relationship between the critical shear stress for the onset of flow instabilities and the work of adhesion at the interface has been evaluated experimentally for a series of polyolefins on several steels, brasses, and coated steels. The critical shear stress was considerably affected by the chemical nature of the die. Low-surface-energy materials were found to produce smooth extrudates presumably by inducing slippage at the wall. Steel, tungsten carbide, and brass surfaces promoted sharkskin defect at shear stresses above the first critical shear stress. A linear relationship between the critical shear stress and the work of adhesion was found to be valid for values of work of adhesion smaller than approximately 30 mN/m. This indicates that slippage occurs due to a breakdown of the adhesion at the interface. For values of work of adhesion greater than approximately 30 mN/m a stronger interaction at the interface may induce a cohesive failure at the interface and subsequently, extrudate distortions.     

In vitro study of antibiotic effect on bacterial adherence to acrylic intraocular lenses

Implantation of artificial intraocular lenses into the eye during ophthalmic surgical procedures ensures an unliving surface on which bacterial pathogens may attach and form biofilms. Despite antibiotic treatment bacteria growing in biofilms might cause inflammation and serious complications. In this study the adhesive ability of 7 Staphylococcus aureus and 11 coagulase-negative Staphylococcus (CNS) strains to the surface of acrylic intraocular lenses had been examined by the ultrasonic method. In untreated cases adhesion of the S. aureus and CNS strains did not differ significantly. We could not demonstrate significant differences between the adhesive ability of the standard strains and the clinical isolates. In this study a single – 60 min long – antibiotic (ciprofloxacin and tobramycin) treatment had been applied, that correlate well with the single or intermittant antibiotic prophylaxis of patients. Ciprofloxacin administration was able to reduce significantly the number of attached cells on the surface of acrylic lenses both in the case of S. aureus and CNS strains. Dependence of the effect from concentration could also be demonstrated. Tobramycin treatment was able to inhibit significantly the attachment of S. aureus cells. Despite the debate on antibiotic prophylaxis we presented in our experiments that a single antibiotic administration can decrease the attachment of bacterial cells to the surface of acrylic intraocular lenses, and might be effective in the prevention of postoperative endophthalmitis, that is a rare but serious complication of ophthalmic surgery.     

脱粘缺陷对粘接结构频散特性的影响

采用全局矩阵理论,通过引入内聚强度弱化模型和弹簧模型,计算了脱粘缺陷对粘接结构频散特性的影响。分析了内聚强度缺陷、界面缺陷及混合缺陷等因素对粘接结构频散特性的影响,发现频散曲线的演化规律与材料声学性质密切相关。不同材料和不同组合,其规律有很大不同。针对各向同性粘接结构,可能通过考察特定频率段内频散模态的变化,实现对脱粘缺陷的检测。