A microprocessor based autoscanner for electromigration studies in thin films

Mass transport due to electromigration can be estimated if the diffusion coefficientD and the electromigration effective charge numberZ* are known. Neutron activated tracer scanning method determine the radioactivity at different positions. An automatic scanning system for determining the radioactive concentration profiles developed using a microprocessor is described in this paper. Using the radioactive concentration profiles the electromigration shift is determined. From this shift the electromigration effective charge numberZ* is calculated. The system developed was tested for tin thin films.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

KBA显微镜成像系统的成像模拟及X光成像实验的研究

KBA显微镜是一种非轴对称、非共轴的掠入射成像系统。其结构复杂,调节精度要求很高,在实际成像实验操作中难以掌握其成像特性。利用光学设计软件模拟其成像,对系统的调节和成像分析提供有益的参考。利用光学设计软件ZEMAX模拟了KBA显微镜对点源的成像过程,给出了KBA显微镜成像系统的焦深约为1 mm,景深为50 mm左右。并且由模拟可知,掠入射角对成像的影响很大。对像素尺寸约10μm的探测设备,模拟得出KBA成像系统的空间分辨力上限为3μm左右。基于星光Ⅱ装置对周期为20μm的网格靶成像,获得了KBA显微镜较为清晰的X光图像。该项工作为进一步开展掠入射成像系统的研究奠定了基础。     

Determination of trace elements in seawater samples by on-line column extraction/graphite furnace atomic absorption spectrometry

An innovative procedure for the on-line coupling of ion chromatography with graphite furnace atomic absorption spectrometry is described, which is particularly effective for the determination of trace metals in seawater samples. The Capillary Injection Device (CID) is used as an interface which allows the eluent to be transferred from the chromatographic column into the graphite tube at a flow rate of as high as 2 ml/min. The analytical procedure is based on the metal complex formation with 8-hydroxyquinoline in the sample solution, followed by the preconcentration of the complexes in a chromatographic column packed with XAD-2 resin. The complexes were then eluted from the column with methanol, and quantitatively injected into the furnace. The procedure was validated by determining cadmium and lead in certified reference seawater samples at a level of 30–40 pg/g, with a typical reproducibility of 10% and an accuracy of better than 5%. Finally, it was tested on a real sample of seawater. Due to the high reproducibility, a pg/g concentration level can be measured.     

空空导弹测试系统应用LXI总线研究

首先对空空导弹测试系统应用各种仪器总线的情况进行了分析研究,然后介绍了一台PXI总线测试设备的改造方案,该方案中设计了一套基于LXI总线控制的电源子系统,该子系统与PXI主系统一起形成了新的混合总线控制测试设备。该改造方案实现了改造需求中的低成本和小型化设计。同时,结合该方案分析了LXI总线在空空导弹测试系统上应用的优缺点和现阶段局限性。提出了空空导弹测试系统应向着通用、开放和网络化方向发展的观点,得出了未来的空空导弹测试系统将是包含GPIB、VXI、PXI、LXI等总线接口的合成系统,各总线接口仅是网络上的一个节点的结论。     

Laser absorption spectroscopy for combustion diagnosis in reactive flows: A review

Laser absorption spectroscopy (LAS) has been rapidly developed and widely applied to combustion diagnosis in recent decades. As a cost-effective tool for measuring multiple combustion parameters, LAS provides unique properties in terms of accuracy and sensitivity for understanding the reactions and kinetics in reactive flows. Line-of-sight and tomographic LAS techniques have stimulated numerous applications and been proved to be robust for in situ combustion diagnosis in uniform and non-uniform combustion fields, respectively. This review highlights the breakthroughs in the evolution of LAS techniques from the viewpoints of key principles, sensors and instrumentations developed for combustion diagnosis, with particular emphasis on a series of spatially-resolved LAS techniques with their recent applications on obtaining high-fidelity measurement results with minimal intrusion to the practical combustors. Along the way, we note some challenges and requirements for further development of the LAS-based combustion diagnosis.     

Green Determination of Total Iron in Water by Digital Image Colorimetry

A green iOS digital image colorimeter was fabricated for the determination of total iron in natural water. A mobile application operating on an iOS device was designed using Euclidean distance theory to perform iron determination. The application records the components of the color by storing red, green, and blue values as well as calculating the hue, saturation, brightness, and gray values using standard color theory. The component values obtained from the images of orange solutions of iron(II) complex with 1,10-phenanthroline were collected in a database and used for evaluation of the total iron concentration in water samples. Under the optimal conditions for solid-phase extraction used for sample preconcentration, the enrichment factor was 8.18. The iron concentration was determined by this device for concentrations from 0.01 to 1.0?ppm. The iOS digital image colorimeter achieved a limit of quantitation of 0.1?ppm. The accuracy and precision of the iOS digital image colorimeter were validated using a certified reference material, riverine water. The instrumentation was used for the analysis of natural water samples.     

Summary of ISO/TC 201 standard: ISO 11775:2015 – Surface chemical analysis – Scanning probe microscopy – Determination of cantilever normal spring constants

This International Standard describes five methods for the determination of normal spring constants for atomic force microscope cantilevers to an accuracy of 5 to 10%. Each method is in one of the three categories of dimensional, static experimental and dynamic experimental methods. The method chosen depends on the purpose, convenience and instrumentation available to the analyst. For accuracies better than 5 to 10%, more sophisticated methods, not described in the standard, are required. Copyright © 2016 Crown copyright. Surface and Interface Analysis © 2016 John Wiley & Sons, Ltd.     

仪表放大器中电阻变化率与噪声的关系

探讨电阻变化率对由3个运算放大器组成的仪表放大器输出端噪声的影响.把运算放大器噪声模型和电阻噪声模型代入仪表放大器电路,得到输出端噪声与电阻的关系式,通过列表分析,按不同的电阻比筛选出对输出端噪声影响显著的电阻.orCAD软件的仿真结果验证了分析是正确的.     

Evaluation of aerosol lead measurement techniques using laboratory generated super-micrometer particles

High levels of lead in some occupational environments still exist. These include lead paint abatement sites, smelting operations, small arms firing ranges, and other construction scenarios. New emerging technologies provide the capability to provide an on-site alternative to conventional laboratory methods for airborne lead. In this paper we describe the evaluation of two such technologies using laboratory prepared lead-laden super-micron aerosol particles. Size measurements by TSI Aerodynamic Particle Sizer™ indicated the fluctuation of the peak particle sizes varying less than 1% among different runs for a given solution concentration. The content of lead embedded in the particles varied from 14 to 18% between runs of three different lead solution concentrations. A commercially available instrument for airborne lead measurement, AeroLead™, showed promise of becoming fully validated with the addition of design enhancements, although not fully validated by the end of the research program. Some of these areas being reworked by the manufacturer include working electrode issues, such as a more uniform surface area. Once these have been addressed, the manufacturer plans to complete the field and laboratory validation procedures. In a subsequent study, the ABF-LIPS results shown in this paper indicated that the technology could be used to quantify lead in aerosol form with a signal-to-noise ratio of three or larger of approximately 100 μg m⁻³ or higher quantity in a few minutes of measurement interval. The estimated detection limit for Pb using the ABF-LIPS prototype was approximately 60 μg m⁻³. In comparison the Resource Conservation and Recovery Act (RCRA) limit for Pb emission is 250 μg m⁻³.