Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

An improved numerical simulator for multiphase flow in porous media

In basin modelling the thermodynamics of a multicomponent multiphase fluid flux are computationally too expensive when derived from an equation of state and the Gibbs equality constraints. In this article we present a novel implicit molar mass formulation technique using binary mixture thermodynamics. The two proposed solution methods, with and without cross derivative terms between components, are based on a preconditioned Newton‐GMRES scheme for each time‐step with analytical computation of the derivatives. These new algorithms reduce significantly the numerical effort for the computation of the molar masses, and we illustrate the behavior of these methods with numerical computations. Copyright © 2004 John Wiley & Sons Ltd.     

微流控层流技术的研究

基于微型通道自身的层流特点而发展起来的多相层流技术,从最初的液-液微萃取开始,由于其结构加工简单、操作方便和分析功能强大,已逐渐发展成为一种加工分析方法,为微流控分析的研究应用打开了一个崭新的局面。本文概述了层流的基本原理,总结了近10年来在这方面的研究,包括层流界面间的分子扩散、转移现象和化学反应,以及层流刻蚀加工技术及其在制备纳米材料和在生命医学方面的应用。具体介绍了应用层流技术进行微芯片的加工制作,微型反应器的制备,离子、分子的分离分析,聚合物薄膜的形成和应用,微通道内有机合成反应的控制,溶液的浓度梯度控制以及在免疫检测中的应用,对细胞、生物大分子的操作控制,以及对生物试剂的预处理分析等。     

Extremality and the global Markov property II: The global markov property for non-FKG maximal Gibbs measures

We give a condition on a Gibbs measure for an attractive Markov specification, which assures extremality and the global Markov property. As an example of application we consider the class of attractive Markov specifications defined on a compact configuration space over a two-dimensional lattice by the interaction Hamiltonians (assumed to have a finite set of periodic ground configurations) satisfying Peierl's condition. We prove that each extremal Gibbs measure for such a specification, at sufficiently low temperature, has the global Markov property.On leave of absence from the Institute of Theoretical Physics, University of Wrocaw, Poland.     

Imide-aryl ether ketone block copolymers

Imide-aryl ether ketone block copolymers were prepared and their morphology and thermal and mechanical properties investigated. Two aryl ether ketone blocks were incorporated; the first was an amorphous block derived from bisphenol–A and the second block was a semi-crystalline poly(aryl ether ether ketone) prepared from a soluble and amorphous ketimine precursor. Bis(amino) aryl ether ketone and aryl ether ketimine oligomers were prepared via a nucleophilic aromaic substitution reaction with molecular weights ranging from 6,000 to 12,000 g/mol. The oligomers were co-reacted with 4,4′-oxydianiline (ODA) and pyromellitic dianhydride (PMDA) diethyl ester diacyl chloride in N-methyl–2-pyrrolidone (NMP) in the presence of N-methylmorpholine. The copolymer compositions, determined by H-NMR, of the resulting amic ester based copolymers ranged from 8 to 50 wt % aryl ether ketone or ketimine content. Prior to imide formation, the ketimine moiety of the aryl ether ketimine block was hydrolyzed (p-toluene sulfonic acid) to the ketone form producing the aryl ether ether ketone block. Compositions of this block were maintained low to retain solubility. Solutions of the copolymers were cast and cured to effect imidization, producing clear films with high moduli (ca. 2200 MPa) and elongations (33–100%). The copolymers displayed good thermal stability with decomposition temperatures in excess of 450°C. Multiphase morphologies were observed irrespective of the co-block type, block length or composition. © 1992 John Wiley & Sons, Inc.     

Deflagration-to-detonation transition process for spherical aluminum dust/epoxypropane mist/air mixtures in a large-scale experimental tube

The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1...     

含水合物沉积物多相渗流特性研究进展

天然气水合物作为一种储量大、无污染的清洁能源近些年受到了广泛关注. 近20年来,中国进行了较大范围的陆海域天然气水合物储层勘探与储量预测.2017年,中国地质调查局牵头对南海神狐海域的天然气水合物进行了基于降压渗流原理的试验性开采.国内外已进行的水合物试采工程面临着气体产量低、出砂较多等问题,其最主要的原因之一是开发过程中沉积物内复杂多相渗流机理尚不明晰.本文综述了平行毛细管模型、Kozeny模型等广泛应用于天然气水合物开发渗流分析的理论模型,对比分析了水合物开发多尺度渗流过程模拟方法,简述了国内外含水合物沉积物渗透率测试、渗流过程中沉积物物性演变以及水合物开采室内模拟等方面的渗流实验进展,总结了矿场尺度的天然气水合物储层开采过程中产气数值模拟手段,展望了多相渗流模型、储层原位含水合物样品室内测试及结构与物性演化、矿场尺度数值模拟与水平井压裂技术等应用研究的未来方向与挑战.      

Simulating gas–liquid multiphase flow using meshless Lagrangian method

A multiphase flow model has been established based on a moving particle semi‐implicit method. A surface tension model is introduced to the particle method to improve the numerical accuracy and stability. Several computational techniques are employed to simplify the numerical procedure and further improve the accuracy. A particle fraction multiphase flow model is developed and verified by a two‐phase Poiseuille flow. The multiphase surface tension model is discussed in detail, and an ethanol drop case is introduced to verify the surface tension model. A simple dam break is simulated to demonstrate the improvements with various modifications in particle method along with a new boundary condition. Finally, we simulate several bubble rising cases to show the capacity of this new model in simulating gas–liquid multiphase flow with large density ratio difference between phases. The comparisons among numerical results of mesh‐based model, experimental data, and the present model, indicate that the new multiphase particle method is acceptable in gas–liquid multiphase fluids simulation. Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐intrusive reduced‐order modeling for multiphase porous media flows using Smolyak sparse grids

In this article, we describe a non‐intrusive reduction method for porous media multiphase flows using Smolyak sparse grids. This is the first attempt at applying such an non‐intrusive reduced‐order modelling (NIROM) based on Smolyak sparse grids to porous media multiphase flows. The advantage of this NIROM for porous media multiphase flows resides in that its non‐intrusiveness, which means it does not require modifications to the source code of full model. Another novelty is that it uses Smolyak sparse grids to construct a set of hypersurfaces representing the reduced‐porous media multiphase problem. This NIROM is implemented under the framework of an unstructured mesh control volume finite element multiphase model. Numerical examples show that the NIROM accuracy relative to the high‐fidelity model is maintained, whilst the computational cost is reduced by several orders of magnitude. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and Characterization of Al8.31Si1.91Mg3.78O20/Al4.8Si1.2O9.6/Mg2.0Al4.02Si4.98O18 Multiphase Material

A two-step sintering method was used to prepare Al8.31Si1.91Mg3.78O20 (corundum solid solution)/Al4.8Si1.2O9.6 (mullite solid solution)/Mg2.0Al4.02Si4.98O18 (cordierite solid solution) multiphase material, for the purposes of making these three crystal structures have point defects which could help the particles diffuse and transfer at high temperature, accelerate the sintering efficiently and enhance the material strength as well as the bulk density. The impacts of different formulas on the structure and properties of the multiphase material were investigated. With XRD and SEM analyses, for each sample, the crystal structure and microstructure were characterized, the crystalline phase content and cell parameters were determined with Rietveld Quantification software, and the properties were tested. The comparative optimal formula determined was calcinated chamotte of 80wt% and calcinated sludge of 20wt%; and its corresponding bending strength and retention rate of bending strength after a thermal shock were 29.74 MPa and 80.15%, respectively.