玻璃陶瓷材料中Tm3+离子红外到蓝色上转换发光

系统研究了PbF2+GeO2+WO3ⅩⅣTmF3玻璃陶瓷材料中,在近红外光(1.06μm)激发下,Tm3+离子的发光特性.实验中观测到Tm3+离子的两组峰值位置分别在20920cm-1和22173cm-1的蓝色上转换发光,并证实这两组上转换发光分别与吸收三个和四个光子有关,同时建立了上转换发光的模型.为了选择最佳掺杂浓度,详细地测量了Tm3+离子峰值为20920cm-1的蓝色上转换发光强度与TmF3浓度的关系.     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Towards the synthesis of MAX-phase functional coatings by pulsed laser deposition

Pulsed laser deposition with a Nd:YAG laser was used to grow thin films from a pre-synthesized Ti₃SiC₂ MAX-phase formulated ablation target on oxidized Si(1 0 0) and MgO(1 0 0) substrates. The depositions were carried out in a substrate temperature range from 300 to 900 K, and the pressure in the deposition chamber ranged from vacuum (10⁻⁵ Pa) to 0.05 Pa Argon background pressure. The properties of the films have been investigated by Rutherford backscattering spectrometry for film thickness and stoichiometric composition and X-ray diffraction for the crystallinity of the films. The silicon content of the films varied with the energy density of the laser beam. To suppress especially the silicon re-sputtering from the substrate, the energy of the incoming particles must be below a threshold of 20 eV. Therefore, the energy density of the laser beam must not be too high. At constant deposition energy density the film thickness depends strongly on the background pressure. The X-ray diffraction measurements show patterns that are typical of amorphous films, i.e. no Ti₃SiC₂ related reflections were found. Only a very weak TiC(2 0 0) reflection was seen, indicating the presence of a small amount of crystalline TiC.     

Study of archaeological ceramics by total-reflection X-ray fluorescence spectrometry: Semi-quantitative approach

Total-reflection X-ray fluorescence spectrometry has been compared with Instrumental Neutron Activation Analysis in order to test its potential application to the study of archaeological ceramics in the archaeometric field. Two direct solid non-chemical sample preparation procedures have been checked: solid sedimentation and solid chemical homogenization. For sedimentation procedure, total-reflection X-ray fluorescence allows the analysis of the elemental composition with respect to the size fraction but not the average evaluation of the composition. For solid chemical homogenization procedure, total-reflection X-ray fluorescence provides precise (from 0.8% to 27% of coefficient of variation) and accurate results (from 91% to 110% of recovery) for 15 elements (Cr, Hf, Ni, Rb, Al, Ba, Ca, K, Mn, Ti, V, Cu, Ga, Y and Fe) with an easy sample preparation process of the solid clay and without previous chemical treatment. The influence of the particle sizes has been checked by total-reflection X-ray fluorescence sample angle scans and anomalous behaviors have been found for three additional detected elements: As, Sr and Zn, which can be attributed to interference effects of the mineral grain sizes of their associated chemical phases in the total-reflection X-ray fluorescence interference region. The solid chemical homogenization procedure produces data useful for archaeological interpretation, which is briefly illustrated by a case-study. Finally, the decantation procedure data can be also useful for size chemical speciation and, consequently, for alternative environmental total-reflection X-ray fluorescence applications.     

Ba(Zr0.3Ti0.7)O3 铁电薄膜的制备

介绍了用溶胶-凝胶法(sol-gel)在Pt/Ti/SiO2/Si衬底和石英衬底上制备Ba(Zr0.3Ti0.7)O3铁电薄膜的基本原理、工艺过程及工艺特点;Sol-gel制备的Ba(Zr0.3Ti0.7)O3铁电薄膜表面平整、厚度均匀.     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

大电流稳定发射铁电阴极的模拟与实验研究

讨论了铁电阴极的发射机理, 借助MAFIA对不同电极结构的铁电阴极表面电场分布进行了模拟计算. 计算中发现, 发射面电极结构对铁电阴极表面三界点处的场增强效应影响很大,特别是具有孤岛电极结构的铁电阴极具有更大的三界点场强,从而获得更大和更稳定的发射电流. 通过对电极结构及其工艺的改进,使用PLZT铁电阴极在实验中得到了大于100A的电流.     

Effect of post-metallization annealing on the ferroelectric properties of sol-gel derived PZT thin films

A series of monolithic Pt-PZT-Pt capacitors was prepared based on sol-gel derived PZT 53/47 films fired to 700 C. After deposition of top Pt electrodes, the capacitors were subjected to post-metallization annealing (PMA) temperatures of 100 C to 700 C. Dielectric and ferroelectric (FE) characterizations were performed. Increasing the PMA temperature produced lower values of spontaneous and remanent polarizations, dielectric constant and leakage currents. The observations are correlated with a proposed FE capacitor model.     

Laser Annealing of Thin-Film Ferroelectric Heterostructures

Preliminary experiments on laser annealing of ferroelectric samples by ultraviolet radiation of a KrF laser are carried out. In principle, laser annealing allows one to reduce appreciably the duration of thermal action, minimize the size of the samples treated, and control the crystallization processes in the samples. A special focussing system was employed to provide homogeneous irradiation of the spot with dimensions of ~1×1 cm² within a broad energy range from 0.1 to 10~J per pulse. The range of energy densities leading to phase transitions in thin films is determined.