金－钼酸盐－耐尔蓝缔合显色反应的研究

在聚乙烯醇存在下，金与钼酸盐形成络阴离子，继而与耐尔蓝形成离子缔合物，其最大吸收位于５９５ｎｍ，表现摩尔吸光系数ε值为２．７１×１０￣５Ｌ．ｍｏｌ￣（－１）．ｃｍ￣（－１），线性范围０～１６μｇ／２５ｍＬＡｕ，大多数离子不干扰。用于岩矿和冶金产品中金的测定，结果满意。     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

Seeding and the Non-Hydrolytic Sol-Gel Synthesis of ZrW2O8 and ZrMo2O8

The unseeded non-hydrolytic sol-gel synthesis of ZrW₂O₈ and ZrMo₂O₈ produces trigonal ZrM₂O₈ (M = W, Mo) at 740 and 300–400°C, respectively. Cubic ZrW₂O₈ can be prepared using non-hydrolytic sol-gel methods by seeding with small amounts of preprepared cubic material, and the formation of the trigonal polymorph can be suppressed completely. Seeds with a small particle size are necessary for the preparation of cubic ZrW₂O₈. In contrast, seeding of ZrMo₂O₈ gels with either cubic ZrMo₂O₈ or cubic ZrW₂O₈ only lowers the temperature at which the trigonal phase crystallizes.     

Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.     

丁基罗丹明B—钼酸盐光度法连续测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，丁基罗丹明Ｂ（ＢＲＢ）分别与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５７０ｎｍ，表面摩尔吸光度分别为εＣｅ＝３．９６×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，εＳｃ＝４．７１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，服从比耳定律范围分别为０－２４μｇ／Ｌ Ｃｅ和０－６０μｇ／ＬＳｃ，测定极限为Ｃｅ１．０μｇ／Ｌ（ｎ＝１２）和Ｓｃ１．９μｇ／Ｌ（ｎ＝１０），对     

乙基罗丹明B-磷钒钼杂多酸-PVA体系超高灵敏显色反应的研究及应用

研究了乙基罗丹明B 磷钒钼杂多酸 PVA体系超高灵敏显色反应的适宜条件、灵敏度和选择性 ,及在实际工作中的应用。缔合物的最大吸收波长为 5 86nm ,表观摩尔吸光系数为 1.4×10 5L·mol- 1·cm- 1。方法用于钢铁、化学试剂和铬铁矿等中痕量磷的直接测定 ,结果满意     

从P-Mo(Ⅴ)杂多化合物合成多形貌Al_(13)基钼酸盐晶体

以H3PMo12O4·0nH2O、H4PMo11VO4·0nH2O和(NH4)6P2Mo18O6·2nH2O3种杂多化合物为钼源,采用直接混合后陈化的方法合成了多形貌A113基钼酸盐晶体,相应A113基钼酸盐晶体的形貌和尺寸分别是斜方三棱柱形(80μm×30μm)、星形(30μm×10μm)和叶片形(500μm×150μm)。粉末X射线衍射结果表明这3种多形貌A113基钼酸盐晶体结晶较好,在2θ为6.65°、8.00°和14.16°处都有强而尖锐的衍射峰。而以Na2MoO4·2H2O为钼源时只能制得无定形簇合物。根据ICP、FTIR和TG/DTG结果给出多形貌的Al13基钼酸盐晶体的化学简式为Na[AlO4Al12(OH)24(H2O)12][MoO4]·48H2O。初步探讨了A113基钼酸盐晶体的形成机理。     

Synthesis and Structural Characterization of a Polyoxomolybdate HNa_7[Mo_(36)O_(112)(H_2O)_(16)]·47H_2O

A new polyoxomolybdate complex HNa7[Mo36O112(H2O)16]·47H2O 1 has been prepared in the beaker solution and characterized by single-crystal X-ray diffraction and elemental analyses. Crystal data: H127Mo36Na7O175, Mr = 6542.79, monoclinic, C2/c, a = 40.891(6), b = 17.900(3), c = 25.580(4) , β = 125.673(2)°, V = 15210(4) 3, Z = 4, Dc = 2.857 g/cm3, F(000) = 12464, μ = 3.013 mm-1, R = 0.0633 and wR = 0.1654 (I > 2σ(I)). With the bridging sodium cations, the [Mo36O112(H2O)16]8- units in compound 1 are linked to form a one-dimensional structure, on the basis of which a three-dimensional architecture is further constructed via other sodium cations and complicated hydrogen bonds.     

铂（Ⅳ）—钼酸盐—丁基罗丹明B缔合显色反应的研究

本文研究在聚乙烯醇(PVA)存在下,铂与钼酸铵和丁基罗丹明B(BRB)形成离子缔合物,该缔合物的最大吸收位于570nm,摩尔吸光系数ε值为9.26×10~5L·mol~(-1)·cm~(-1),服从比耳定律范围0～3.0μg Pt/25ml,缔合物至少稳定3周。测定铂的条件为C_(HClO_4)=1.4mol/L,C_(MoO_4~(2-)=1.1×10~(-3)mol/L,C_(BRB)=3.8×10~(-5)mol/L,0.08％PVA。考察了40多种共存离子的影响,除形成杂多酸的元素外,大多数不干扰。本法已用于催化剂和某些铂矿中铂的测定,结果较满意。     

Spectrophotometric method for the determination of demeclocycline using sodium molybdate as analytical reagent

By means of spectroscopic methods it has been found that demeclocycline reacts with molybdate ions forming a complex compound [MoO₃HDMTC]^2–. The relative stability constant of this compound has been determined by applying spectrophotometric methods. Under optimum conditions for complex formation a very sensitive spectrophotometric method for the estimation of demeclocycline in the concentration range 5.0–35.1 g/ml is proposed. The detection limit of the method is 2.5 g/ml of demeclocycline. The relative standard deviation (n=10) varies between 0.76% and 1.46%. The method proved to be accurate and sensitive for the analysis of the demeclocycline content in tablets.