Advances in late transition metal catalysts for olefin polymerization/oligomerizarion

In this review article, we have consolidated our recent studies on late transition metal catalysts (mainly Fe, Co) for olefin polymerization/oligomerization. A series of bisiminopyridyl Co(II) and Fe(II) complexes were synthesized. These catalysts when activated with MAO in aromatic or aliphatic hydrocarbon solvents, oligomerize or polymerize ethylene to α-olefins or high molecular weight polymers with exceptionally high activities and selectivities. The electronic and steric effects of allyloxy and benzyloxy substituted bisiminopyridyl Fe(II) and Co(II) complexes were also investigated. The influence of catalyst structure and temperature on the polymerization activity, thermal properties and molecular weight were discussed. The effects of heterogenization of these catalysts on silica and modified SBA-15 were analyzed. The polymerization of polar monomers such as vinyl ethers and methyl methacrylate was tested and no specific trends in activity and polymer molecular weight with changes in steric bulkiness around the metal center were observed with the same catalyst system.     

Performance of various activators in ethylene polymerization based on an iron(II) catalyst system

Ethylisobutylaluminoxane (EBAO) and its analogues were synthesized by a reaction between an triethylaluminum (Et₃Al)/triisobutylaluminum (i‐Bu₃Al) mixture and 4‐fluorobenzeneboronic acid, phenylboronic acid, or n‐butaneboronic acid and subsequent hydrolysis with water. They were used as cocatalysts in ethylene polymerization catalyzed by an iron complex {[(ArN?C(Me))₂C₅H₃N]FeCl₂, where Ar is 2,6‐diisopropylphenyl}. Polyethylene with a high molecular weight and a narrow molecular weight distribution was prepared with modified EBAOs, and the performance of the iron complex at high polymerization temperatures was greatly improved. The activators for the iron complex also affected the polymerization activity and the molecular weight of the resultant polyethylene. It was suggested that the stereo and electronic effects of the substitute groups of aluminoxane contributed to the improved performance of the new activators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1093–1099, 2004     

PRELIMINARY RESEARCHES ON LICHENOMETRIC CHRONOLOGY OF HOLOCENE GLACIAL FLUCTUATIONS AND ON OTHER TOPICS IN THE HEADWATER OF URUMQI RIVER, TIAN-SHAN MOUNTAINS

This paper introduced briefly the research results on lichenometry of the Holoceneglacial fluctuations in the headwater of the Urumqi River, in the central TianshanMountains and discussed the histories of the Holocene glaciers and the climate. It isconsidered that lichenometry is one applicable method for dating the mid- and late-Holocene deposits in the cold and mountainous regions. Rhizocarpon geographicum (L.)DCand Xanthoria elegans (Link.) Th. Fr. could be used for dating the deposits of about 4500and 500 a B.P. respectively. There existed at least four periods of glacial advances whichoccurred before about 5700, 4100, 2800 and 403- 74 a B. P. respectively with the firstperiod the longest. Little Ice Age includes three stages of glacial advances which endedbefore about 403, 208 and 74 a B. P. respectively with the second stage the maximum.During the general Holocene warming processes, there existed at least four cold peri-ods which ended before about 5700, 4100, 2800 and 420- 91 a B.P. respectively,     

Role of water vapor and CO2 in the paleoclimatic fluctuations along northwestern and southern Syria, and the adjacent Mediterranean Sea

Microscopic petrified grains were collected from a mafic–ultramafic pipe, NE of Dreikeesh, NW Syria. The grains were identified as anthers/gynoecia in herb/grass flowers. Three of the grains showed evidence of magnetism, two slowly dissolved in concentrated HCl, and three microprobed grains showed a montmorillonitic composition. Iron originating from pyroxene was oxidized to magnetite. Released silica formed the mineral suite agate–chalcedony–opal. Warm/cold paleoclimatic fluctuations, occurring during late Pliocene–Holocene, depended on water vapor, CO₂ production, and cinders in the atmosphere. Most of these were associated with changing volcanic/tectonic events. Fluctuations were controlled by heat reflected from the Earth's surface being absorbed by water vapor and CO₂, which both re-reflected the heat back to the surface, thus, raising the temperature. This cycle was repeated several times during late Pliocene–Holocene.     

Rh-Catalyzed Decarbonylative Cross-Coupling between o-Carboranes and Twisted Amides: A Regioselective,Additive-Free,and Concise Late-Stage Carboranylation

The convenient cross-coupling of sp² or sp³ carbons with a specific boron vertex on carborane cage represents significant synthetic values and insurmountable challenges. In this work, we report an Rh-catalyzed reaction between o-carborane and N-acyl-glutarimides to construct various B_cage−C bonds. Under the optimized condition, the removable imine directing group (DG) leads to B(3)− or B(3,6)−C couplings, while the pyridyl DG leads to B(3,5)−Ar coupling. In particular, an unexpected rearrangement of amide reagent is observed in pyridyl directed B(4)−C(sp³) formation. This scalable protocol has many advantages, including easy access, the use of cheap and widely available coupling agents, no requirement of an external ligand, base or oxidant, high efficiency, and a broad substrate scope. Leveraging the Rh^I dimer and twisted amides, this method enables straightforward access to diversely substituted and therapeutically important carborane derivatives at boron site, and provides a highly valuable vista for carborane-based drug screening.     

HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.     

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w=8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w=20-50 kDa).     

Biological and catalytic evaluation of Ru(II)‐p‐cymene complexes of Schiff base ligands: Impact of ligand appended moiety on photo‐induced DNA and protein cleavage,cytotoxicity and C‐H activation

Two organometallic Ru(II)‐p‐cymene complexes of the type [Ru(η⁶‐p‐cymene)(L)Cl]PF₆ 1 and 2 , where L is N,N‐bis(4‐isopropylbenzylidene)ethane‐1,2‐diamine (bien, L1 ) or N,N‐bis (pyren‐2‐ylmethylene)ethane‐1,2‐diamine (bpen, L2 ) have been prepared and characterized well. Because of appended pyrenyl groups in coordinated bpen ligand, the complex 2 exhibits higher DNA and protein binding than complex 1 in which isopropylbenzyl groups are incorporated. Interestingly, the luminescent characteristic complex 2 is unique in displaying DNA cleavage after light activation by UVA light at 365 nm through oxygen dependent mechanism. AFM analysis attests the photo‐induced DNA fragmentation ability of complex 2 . Also, the complex 2 cleaves the protein after light exposure in a non‐specific manner suggesting that it can act as a protein photo cleaving agent. In contrast to the trend of DNA and protein interaction of complexes, the complex 1 exhibits cytotoxic activity against human breast carcinoma ( MCF‐7 ) and liver carcinoma ( HepG2 ) with potency higher than that of complex 2 due to enhanced hydrophobicity of isopropyl groups present in p‐cymene and bien ligands. Indeed, complex 2 is inactive against MCF‐7 and HepG2 cancer cell lines even up to 200 μM concentration. The AO/EB staining assay reveals that the complex 1 is able to induce late apoptotic mode of cell death in breast cancer cells, which is further confirmed by inter‐nucleosomal DNA cleavage. Furthermore, the complexes 1 and 2 are evaluated for their catalytic activities and found to be working well for the β‐carboline directed C–H arylation to afford the desired products in good yield (40–47%).     

A survey of metabolic changes in potato leaves by NMR‐based metabolic profiling in relation to resistance to late blight disease under field conditions

Non‐targeted nuclear magnetic resonance (NMR)‐based metabolic profiling was applied to potato leaves to survey metabolic changes associated with late blight resistance under field conditions. Potato plants were grown in an experimental field, and the compound leaves with no visible symptoms were collected from 20 cultivars/lines at two sampling time points: (i) the time of initial presentation of symptoms in susceptible cultivars and (ii) 12 days before this initiation. ¹H NMR spectra of the foliar metabolites soluble in deuterium oxide‐ or methanol‐d₄‐based buffers were measured and used for multivariate analysis. Principal component analysis for six cultivars at symptom initiation showed a class separation corresponding to their levels of late blight resistance. This separation was primarily explained by higher levels of malic acid, methanol, and rutin and a lower level of sucrose in the resistant cultivars than in the susceptible ones. Partial least squares regression revealed that the levels of these metabolites were strongly associated with the disease severity measured in this study under field conditions. These associations were observed only for the leaves harvested at the symptom initiation stage, but not for those collected 12 days beforehand. Subsequently, a simple, alternative enzymatic assay for l ‐malic acid was used to estimate late blight resistance, as a model for applying the potential metabolic marker obtained. This study demonstrated the potential of metabolomics for field‐grown plants in combination with targeted methods for quantifying marker levels, moving towards marker‐assisted screening of new cultivars with durable late blight resistance. Copyright © 2016 John Wiley & Sons, Ltd.     

Copolymerization of norbornene with methoxycarbonylnorbornene catalyzed by Ni{CF3C(O)CHC[N(naphthyl)]CH3}2/B(C6F5)3 catalytic system and good processability for Dry/Wet phase inversion and electrospinning technique

Copolymerization of norbornene (NB) with methoxycarbonylnorbornene (NB‐COOCH₃) was carried out with catalytic system of Ni{CF₃C(O)CHC[N(naphthyl)]CH₃}₂ and B(C₆F₅)₃ in toluene. The catalytic system exhibited higher activity 2.69 × 10⁵ (gpolymer/mol Ni h) for copolymerization of norbornene and methoxycarbonylnorbornene. The influence results of the comonomer feed content on the polymerization showed that the NB‐COOCH₃ has a very high insertion ratio in all copolymers, and the NB‐COOCH₃ content in copolymers can be controlled to be 7.9–77.6 mol % at content of 10–90 mol % of the NB‐COOCH₃ in the monomer feeds ratios. The reactivity ratios, r_NB‐COOCH3 = 0.578 and r_NB = 0.859, were determined by the Kelen–TÜdÕs method. Copolymers were processed by solution casting method, dry/wet phase inversion technique, and electrospinning. The films prepared by solution casting method showed good transparency in the visible region. The membranes processed by dry/wet phase inversion technique were microporous structures. The fibers diameters fabricated by electrospinning were about 3 μm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011