Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Donor-acceptor properties, catalytic activity, and negative charge exoemission from the alumina surface modified with lithium cations

Donor-acceptor properties of alumina modified with lithium cations were studied by ESR of paramagnetic complexes of adsorbed anthraquinone. The results were compared with the data on negative ion emission (exoemission) accompanying the decomposition of isopropyl alcohol in the adsorption layer. The data on the activity measured by the pulse microcatalytic technique in isopropyl alcohol decomposition are discussed. Small additives of lithium were found to promote catalytic activity of the samples. The role of acid and basic sites in isopropyl alcohol decomposition was discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 616–621, April, 2006.     

甲烷磺酸盐的合成、表征及其催化酯化反应的性能

Methane-sulfonate of copper, cobalt, zinc, lanthanide, praseodymium and neodymium are synthesized and characterized by FTIR and TGA. Methane-sulfonates are used as the catalysts in the esterification of chloroacetic acid with isopropanol. Catalytic activity of methane-sulfonates is studied and compared with other Lewis acids. Under the condition of 1.2/1 molar ratio of isopropanol to chloroacetic acid, 1% catalyst (molar percent of chloroacetic acid), 2.5h reaction time, 80～85℃ temperature and benzene as water-carrying agent. The experi-mental results showed that catalytic activity of Lanthanide methane-sulfonate was the best, the yield of isopropyl chloroacetate reaches 88.7%. Copper methane-sulfonate can be reused for three times without distinct loss of catalytic activity.     

固体铁系超强酸的制备及催化水杨酸异丙酯的合成

报道固体铁系超强酸作为酯化催化剂，并研究了用此催化剂催化合成水杨酸异 丙酯，实验结果表明：水杨酸与异丙醇的投料比n酸：n醇＝1：6，催化剂的用量占 反应物总投料质量的6％，反应时间为4h,得产物水杨酸异丙酯，其产率达到94．5 ％，同时对催化剂的催化性能进行了讨论。     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

A new Sequiterpenoid from Eupatorium adenophorum Spreng

A new sequiterpenoid compound 8aα-hydroxy-1-isopropyl-4,7-dimethyl-1,2,3,4,6,8a-hexahydro-naphthalene-2,6-dione(1),together with seven known compounds anti-HH-dimer-coumarin(2),(-)-5-exo-hydroxy-bomeol(3),O-hydroxyl cinnamic acid(4),9β-hydroxy-ageraphorone(5),10Hα-9-oxo-ageraphorone(6),10Hβ-9-oxo-ageraphorone(7)and 9-oxo-10,11-dehydroageraphorone 8,was isolated from the leaves of Eupatorium adenopho-rum Spreng.The structures were elucidated by IR,~1H and ~(13)C NMR,EIMS,HMBC and single-crystal X-ray spec-tral data.     

杯[6]芳烃-双金属卟啉仿P-450酶模型的研究Ⅳ.对异丙苯氧化的催化行为

研究了杯[6]芳烃-双金属卟啉在氧化异丙苯中的催化行为，结果表明杯[6]芳烃-双金属卟啉比之相应的金属卟啉具有更高的催化活性，并表现同样的选择性，生成苯乙酮和醇组份。此一结果同通常酞菁或其它如西弗碱大分子金属络合物催化下生成丙酮和酚不同。还考察了温度、轴向配体、催化剂用量及金属离子种类等对反应的影响，仔细地通过测定反应速度比较了反应的活性。     

A novel route to prepare highly surface active nanogel particles based on nonaqueous emulsion polymerization

The motivation of the current work has stemmed from the fact that the selection of suitable stabilizers for nonaqueous emulsions is still challenging because of lack of general knowledge about the underlying stabilization mechanisms. The preparation and surface activity of new amphiphilic gel nanoparticles in organic solvents were investigated. A new bifunctional surfmer was prepared by reacting polyoxyethylene 4‐nonyl‐2‐propylene‐phenol nonionic reactive surfactant with maleic anhydride followed by esterification with poly(ethylene glycol). This surfmer was used as stabilizer to prepare amphiphilic crosslinked N‐isopropylacrylamide (NIPAm) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) copolymer nanogel on the basis of nonaqueous radical copolymerization temperature modified method in the presence of toluene and formamide (FA) as solvents and N, N‐methylene bisacrylamide as a crosslinker. The chemical structure of the prepared nanogels was determined by Fourier transform infrared spectroscopy analyses. The morphologies of the prepared nanogels were detected by transmission electron microscopy and scanning electron microscopy techniques. The surface tension of colloidal NIPAm/AMPS dispersions was measured in FA as functions of surface age (time), temperature, and the morphology of the NIPAm/AMPS nanogels. The NIPAm/AMPS nanogels reduced the surface tension of FA from 58.2 to about 30.2 mN/m at 25°C, and a little increase in the surface tension was observed at 40°C. The prepared nanogels show great reduction in interfacial tension values between FA and styrene. The NIPAm/AMPS dispersions exhibited high surface activity and used as stabilizers to prepare crosslinked styrene‐co‐AMPS microgel in the presence of divinylbenzene and FA as organic solvents based on nonaqueous emulsion crosslinking polymerization technique. Copyright © 2013 John Wiley & Sons, Ltd.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.