利用富铈混合稀土改善工业纯铝中富铁相形貌的研究

利用金相分析方法研究了富Ce混合稀土变质对含不同Fe量的工业纯铝的组织和其中富铁相形貌的影响。试验结果表明,随着Fe含量的增加,富铁相由弥散细小的颗粒状向短棒状、长针状转变;富Ce混合稀土变质使铝中的富铁相由长针状变为弥散细小的颗粒状。随着稀土含量的增加,-αAl晶粒逐渐细化,富铁相尺寸及数量逐渐减小。添加0.5%稀土时,-αAl晶粒细化效果最佳,而且富铁相呈细小颗粒状均匀分布在-αAl基体的晶界处。本文还对稀土改善富铁相的机制进行了分析。     

CreditRisk+模型下商业银行经济资本配置研究

对金融资产风险的度量与经济资本的分配应该体现分散化效应,传统的V aR方式不能保证分散化效应的次可加性.本文讨论了基于T a ilV aR这一新的风险度量与经济资本分配标准,并在违约率均值不变情况下,对C red itR isk+模型下的商业银行经济资本分配进行了实证分析.     

基于人工神经网络的商业银行信用风险模型

在对人工神经网络的基本原理进行简要介绍的基础上 ,着重对构建商业银行信用风险的人工神经网络模型进行了研究 ,实证结果表明 ,人工神经网模型具有很高的预测精度     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Reaction and mass transfer effects in a catalytic monolith reactor

Zeolite-based monoliths (Cu/ZSM-5 on cordierite) are prepared and used to catalyze direct decomposition of nitrogen monoxide. Two-dimensional heterogeneous model is applied to describe the behavior of the monolith reactor, with the emphasis on the features introduced due to coupling of flow, mass transfer and chemical reaction. The proposed model has been verified by comparing computer simulation data with laboratory experimental data. It is shown that both inter- and intraphase diffusion limitations have to be considered when modeling complex reactor configuration, such as monolith reactors, especially when monolith with thicker catalytic layer are used at higher temperatures.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Preparation of high loading PolyHIPE monoliths as scavengers for organic chemistry

A novel microcellular polyHIPE monolith of high functional group capacity has been prepared by a two-step process including the synthesis of the scaffold by polymerization of a highly concentrated emulsion and then the in situ surface polymerization of methacrylate monomers. Application of the resulting functionalized monolith is demonstrated in a scavenging reaction of poly(glycidyl methacrylate)-grafted polyHIPE with 1-hexylamine. The open-cellular structure of the core combined with the good accessibility of the grafted functional polymer chains allows total scavenging of the amine in a relatively short period.     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

Determination of low-aliphatic aldehyde derivatizatives in human saliva using polymer monolith microextraction coupled to high-performance liquid chromatography

In this study, a polymer monolith microextraction (PMME) using a poly (methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith in conjunction with high-performance liquid chromatography (HPLC) was developed for the determination of 2,4-dinitrophenylhydrazine (DNPH) derivatives of several aldehydes in human saliva. The conditions for the labeling reactions of aldehydes with DNPH and followed extraction of the derivatives were optimized. The precision, recovery and detection limits were evaluated with spiked saliva. The limits of detection ranged from 0.43 to 1.40 μg/L. The inter-and intra-day relative standard deviations were less than 10%. The proposed method was successfully applied to the determination of aldehydes in saliva samples from a non-smoker, a passive smoker and a heavy smoker.     

Development and evaluation of microfluidic device for the determination of organophosphorus pesticide incorporating monolith based immobilized AChE with spectrophotometric detection

A spectrophotometric microfluidic bioreactor system is described for the determination of organophosphorus pesticides. The glass chip was designed and fabricated for in situ monolithic preparation and subsequently acetlycholineserase (AChE) immobilization via a covalent bonding method. The porous polymer monolith was prepared using glycidyl methacrylate, ethylenedimethacrylate and 2,2-dimethoxy-1,2-diphenylethan-1-one in binary porogenic solvents of cyclohexanol and dodecanol. The epoxide groups of monolith were reacted with ethylenediamine and gluteraldehyde to allow immobilization of the enzyme using their amine groups. Organophosphorus pesticides can be determined by measuring their inhibition effect on the enzyme AChE using Ellman's reaction. A linear relationship between the absorbance and percentage inhibitions was obtained over the concentration range of 0.25 to 2.50?mg?L^?1 paraoxon with a correlation coefficient (r ²) of 0.9974. The limit of detection (LOD) defined as 10% inhibition (I ₁₀) was 0.17?mg?L^?1 for paraoxon. The relative standard deviations (RSD) of 1.0?mg?L^?1 paraoxon was 3.73% (n?=?5). The proposed µFI system incorporates efficient enzyme immobilization and reduces reagent consumption and waste production and could thus be considered to be more environmentally friendly.