Hydrodynamic Radius Characterization of a Vinyl-Type Polynorbornene by Size-Exclusion Chromatography with a Static and Dynamic Laser Light Scattering Detector

Both absolute molecular weight and molecular sizes (radius of gyration and hydrodynamic radius) of a vinyl-type polynorbornene eluting from size-exclusion chromatography columns were determined by combined with a static and dynamic laser light scattering detector. The hydrodynamic radius of polymer fraction eluting from size-exclusion chromatography columns was obtained from dynamic laser light scattering measurements at only a single angle of 90° by introducing a correction factor. According to the scaling relationship between molecular sizes and molecular weight and the ratio between radius of gyration and hydrodynamic radius, the vinyl-type polynorbornene took a random coil conformation in 1,2,4-trichlorobenzene at 150 °C.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

Polymer dispersions from catalytic polymerization in aqueous systems

By contrast to traditional free radical emulsion polymerization, catalytic polymerization allows for polymer microstructure control. In terms of polymerizable monomers, both techniques are largely complementary. Since the beginning of this decade, an increasing number of reports on polyolefin, polybutadiene, polyalkenamer, polynorbornene, polyketone, and polyacetylene dispersions prepared by catalytic polymerization in disperse aqueous systems has appeared. This contribution reviews the preparation of these dispersions, their colloidal properties, particle formation mechanisms, particle morphologies, and polymer microstructures.     

基于聚乙烯的无规和嵌段接枝共聚物的制备

采用乙烯配位聚合和巯基-烯点击化学相结合的方法制备了羟基封端的线性聚乙烯,末端羟基含量接近100%;利用酰氯与羟基的高效反应,将羟基封端的聚乙烯转化为降冰片烯封端的聚乙烯大单体(PE-NB).使用Grubbs II代催化剂,将大分子单体与降冰片烯(NB)单体进行开环易位共聚,通过调整单体的投料比和加料方式制备了分子量和组成可控的聚降冰片烯-g-聚乙烯(PNB-g-PE)接枝共聚物.其中,无规共聚时,大单体的转化率接近100%,所得无规接枝共聚物的重均分子量为1.79×10~4~3.14×10~4,分子量分布指数为2.09~2.60,聚乙烯链段的质量分数为4.6%~16.8%;而嵌段共聚时,由于空间位阻原因,大单体的转化率约为80%.热分析研究发现,由于空间位阻,接枝共聚物的结晶度较聚乙烯前驱体略有下降,且接枝度越大,结晶能力下降得越多.     

Polymerization of Norbornene via an Iron-Based Complex/MAO Catalytic System

IntroductionOwing to the high thermal stability,low waterabsorption and excellent optical properties as wellas the utility in an elastomeric material forvibration and sound damping or in a soakingmaterial for oil spills[1— 4 ] ,the homopolymers andthe copolymers of norbornene have attracted aconsiderable attention.So far,a large number oftransition- metal compounds have been known tocatalyze the ring- opening olefin metathesispolymerization (ROMP) ,or the vinyl additionpolymerization (VAP) …     

Nickel (II) complexes with β-enaminoketonato chelate ligands: Synthesis, solid-structure characterization and reactivity toward the addition polymerization of norbornene

Based on two β-enaminoketonato ligands [ArNC(CH₃)C(H)C(CF₃)OH] (L₁, Ar = 2,6-Me₂C₆H₃; L₂, Ar = 2,6-i-Pr₂C₆H₃), their mono(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)Ni(Ph)(PPh₃)] (1, Ar = 2,6-Me₂C₆H₃; 3, Ar = 2,6-i-Pr₂C₆H₃) and bis(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)₂Ni] (2, Ar = 2,6-Me₂C₆H₃; 4, Ar = 2,6-i-Pr₂C₆H₃) have been synthesized and characterized. The molecular structures of complex 1, 2 and 4 have been confirmed by single-crystal X-ray analyses. After being activated with methylaluminoxane (MAO) these catalytic precursors 1-4 could polymerize norbornene to afford addition-type polynorbornene (PNB). Interestingly, catalytic activities and PNB productivity were greatly enhanced due to the introduction of strong electron-withdrawing group - trifluoro methyl into the ligands. Catalytic activities, polymer yield, M_w and M_w/M_n of PNB have been investigated under various reaction conditions.     

Thermal degradation and flame retardancy of polynorbornene by a zeolite

The relation between the thermal decomposition and flammability of polynorbornene (PNB) synthesized by addition polymerization was analyzed. In a small-sized vertical combustion test, the PNB did not combust or drip, and the first ignition was extinguished in the combustion test with a cone calorimeter. The decomposition products of PNB were of some low molecular weight compounds with random scissions on the norbornene structure, and alkene (with 12 carbons in the PNB used in this study) was selectively generated by retro-Diels-Alder reaction. When the zeolite was added, the decomposition was accelerated and low molecular weight products increased, especially H₂O. These results suggested that the flammability of the thermal decomposition gas was caused by the zeolite, which changed the composition of decomposition products. The lower flammability limits calculated in Le Chatelier's equation were increased from 0.9 to 1.3 by the zeolite. The flame retardancy of PNB was observed because the amount of H₂O as an inert gas and the lower flammability limit was increased.     

Shape memory effects of polynorbornene modified by in-situ reactive thermoplastic polyurethane

Shape memory polymers (SMPs) based on polynorbornene (PNB) was prepared and modified by In-situ reactive thermoplastic polyurethane (TPU). Analysis shows that the TPU formed in PNB matrix slightly decreases T_g of PNB from 24.1 to ca. 23.4, which is beneficial to study the shape memory performance at room temperature. A small amount of TPU can be uniformly dispersed in PNB matrix to form interpenetrating network structure, which can significantly toughen and strengthen PNB. Simultaneously, the interpenetrating network can replace the physical entanglement of part of the PNB, increase the free volume among the molecular chains of PNB, make shape fixing easier, and reduce energy consumption in overcoming friction during the recovery process. Therefore, the PNB/TPU composites have higher shape fixing ratio and recovery ratio than PNB. When the content of TPU in PNB matrix is lower, the interpenetrating network of chain entanglements is formed with no phase separation; therefore, the improvement of shape memory performance is remarkable.     

β-二酮钛非茂催化剂催化降冰片烯聚合

用 (dibenzoylmethanato) 2 Ti(OPh) 2 [(dbm) 2 Ti(OPh) 2 ]/甲基铝氧烷 (MAO)为代表的新型 β 二酮钛非茂催化剂实现了降冰片烯的聚合 ,得到加成聚合和开环易位聚合的混合物 ,研究了实现高聚合活性所需的特殊条件及所得的聚合物结构 ,主要应用傅立叶转变红外技术 (FTIR)对聚合物结构进行了表征和分析     

New polycationic polynorbornene latexes bearing an amphiphilic sugar corona of counterions: synthesis and complexation with DNA

A new family of polycationic polynorbornene with ω-gluconamidoalkanoates and ω-lactobionamidoalkanoates as amphiphilic counterions has been prepared. These polymers spontaneously form stable latexes in water with an amphiphilic sugar corona around the particles. With these counterions, the sugar moieties are separated from the surface of latex particles by the aminoalkanoic acid residue and consequently are remote from the surface of such latexes. Such location of sugar may promote their stronger interaction with cell receptors. These original amphiphilic compartmentalized surface polycationic latexes are able to bind and efficiently complex DNA in very small complexes. Furthermore, because of the effect of the sugar corona on the formation of the complexes, there is only a slight influence of the hydrophobicity of the counterions on DNA packing.