Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Fast Fourier Continuous Cyclic Voltammetry at Gold Ultramicroelectrode in Flowing Solution for Determination of Ultra Trace Amounts of Penicillin G

In this work, for the first time a fast continuous cyclic voltammetry was used as a highly sensitive detection method for Penicillin G in a flow‐injection system. A special computer‐based numerical calculation method (using Fast Fourier Transformation) is introduced here for enhancing the analyte signal and noise reduction. During the measurements, the potential waveform (consists of potential steps for cleaning, stripping and potential ramp) was continuously applied on an Au disk microelectrode (with a radius 12.5 μm in radius). The stripping time was less than 200 ms. Effects of rest potential, sweep rate, and delay time on the sensitivity of the method were investigated. The limit of detection of the method was 1.0 × 10^?11 M. The detection limit of the method is 660 times lower than the most sensitive reported method. The relative standard deviation of the method at 1.0×10^?7 M of Penicillin G was 2.7% for 10 runs.     

Concise Synthesis and Antimicrobial Activities of New Substituted 5‐Isoxazolpenicillins

The synthesis of a series of new 5‐isoxazolpenicillins is described, which were obtained by coupling substituted isoxazoles with 6‐APA. Concise large‐scale synthesis of 3,5‐disubstituted isoxazoles by 1,3‐dipolar cycloaddition using copper(I) as catalyst was also investigated. Representative compounds were assayed for antimicrobial activities, showing satisfactory antimicrobial activities against Gram‐negative bacteria.     

Stabilization ofEscherichia coli penicillin G acylase by polyethylene glycols against thermal inactivation

The effects of five polyethylene glycol (PEG) compounds of different molecular weight on the thermal stability of penicillin G acylase (PGA) obtained from a mutant ofEscherichia coli ATCC 11105 have been investigated. The molecular weights of PEG compounds were 400, 4000, 6000, 10,000, and 15,000. The thermal inactivation mechanisms of both native and PEG-containing PGA were considered to obey first order inactivation kinetics during prolonged heat treatments. Optimal concentrations of PEGs at molecular weights of 400,4000, 6000,10,000, and 15,000 were found to be 250,150,150,100, and 50 mM, respectively. The greatest enhancement of thermostability was observed with PEG 4000 and PEG 6000, as a nearly 20-fold increase above 50°C. PGA showed almost the same temperature activity profile and optimal temperature values both in the presence and absence of PEG. The addition of PEGs did not cause any change in the optimal temperature value of PGA, but the parametersV _m ,K _m , the activation energy, and thek _cat values of enzyme were markedly decreased because of the mixed inhibition by PEG compounds. The type of inhibition was found to be hyperbolic uncompetitive.     

Inoculum studies in production of penicillin g acylase by Bacillus megaterium ATCC 14945

This article reports studies concerning the production of penicillin G acylase (PGA) by Bacillus megaterium. This enzyme has industrial use in the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid, an essential intermediate for the production of semisynthetic β-lactam antibiotics. Although most microorganisms produce the enzyme intracellularly, B. megaterium provides extracellular PGA. The enzyme production by microorganisms involves several steps, resulting in a many operational variables to be studied. The study of the inoculum is an important step to be accomplished, before addressing other issues such as culture optimization and downstream processing. In this study, using a standard inoculum as reference, several runs were performed aiming at the definition of operational conditions in the PGA production. Cell concentration and PGA activity in the production medium were measured after 24, 48, and 72 h of the beginning of the production phase. This study encompasses the duration of the inoculum germination phase and the concentration of cells used to startup the germination. Based on these results, PGA productivity during the production phase was maximized. The selected values for these variables were 1.5 × 10⁷ spores/mL of germination medium, germination during 24 h, and 72 h for the production phase.     

反胶团相转移法提取青霉素G的研究

报道了非蛋白质类活性物质青霉素Ｇ在反胶团相转移提取中的特性和机理。结果表明，青霉素Ｇ在ＣＴＡＢ／正辛醇：氯仿（４：１，Ｖ／Ｖ）反胶团体系中的相转移提取为离子对静电作用与胶团溶解机理；在室温及ｐＨ值５～８的条件下，提取率在９０％以上，且保持了青霉素的稳定性。     

亲水性含环氧基磁性聚合物微球的制备与性能表征

选择甲酰胺作磁性Fe3O4微晶的分散剂,通过设计反相悬浮聚合体系,合成了粒径分布窄、球状亲水性含环氧基磁性聚合物(MGM).利用扫描电子显微镜(SEM)、红外光谱(FT-IR)、X射线粉末衍射仪(XRD)、振动样品磁强计(VSM)和低温N2吸附以及化学分析方法对聚合物进行了性能表征.结果表明,合成的MGM呈球形,且粒度分布较窄,粒径为0.13~0.28 mm的粒子占91%;甲酰胺分散Fe3O4,微晶表面的亲水性进一步增强,单体甲基丙烯酸缩水甘油酯和N,N′-亚甲基双丙烯酰胺交联共聚生成的胶粒能够包埋Fe3O4微晶形成胶核,胶核聚集形成均匀、稳定的MGM微球.MGM中Fe3O4含量为6.17%时,比饱和磁化强度σs达6.5 emu/g;其比表面积、平均孔径和孔容分别为117.6 m2/g,15.6 nm和0.46 cm3/g,表面环氧基团含量为0.53 mmol/g.MGM借助自身的活性环氧基团在十分温和的条件下共价偶联青霉素酰化酶(penicillin G acylase EC 3.5.1.11,简称PGA),制备的固定化酶在37℃下催化水解青霉素G钾生成6-氨基青霉烷酸(6-APA)的表观活性达502IU/g,并且在使用过程中没有出现磁聚集现象.     

Highly conformationally constrained halogenated 6-spiroepoxypenicillins as probes for the bioactive side-chain conformation of benzylpenicillin

Summary The halogenated 6-spiroepoxypenicillins are a series of novel semisynthetic-lactam compounds with highly conformationally restricted side chains incorporating an epoxide. Their biological activity profiles depend crucially on the configuration at position C-3 of that epoxide. In derivatives with aromatic-containing side chains, e.g., anilide, the 3R-compounds possess notable Gram-positive antibacterial activity and potent-lactamase inhibitory properties. The comparable 3S-compounds are antibacterially inactive, but retain-lactamase inhibitory activity.Using the molecular simulation programs COSMIC and ASTRAL, we attempted to map a putative, lipophilic accessory binding site on the PBPs that must interact with the side-chain aromatic residue. Comparative computer-assisted modelling of the 3R, and 3S-anilides, along with benzylpenicillin, indicated that the available conformational space at room temperature for the side chains of the 3R and the 3S-anilides was mutually exclusive. The conformational space for the more flexible benzylpenicillin could accommodate the side chains ofboth the constrained penicillin derivatives. By a combination of van der Waals surface calculations and a pharmacophoric distance approach, closely coincident conformers of the 3R-anilide and benzylpenicillin were identified. These conformers must be related to the antibacterial, bioactive conformer for the classical-lactam antibiotics. From these proposed bioactive conformations, a model for the binding of benzylpenicillin to the PBPs relating the three-dimensional arrangement of a putative lipophilic S₂-subsite, specific for the side-chain aromatic moiety, and the 3-carboxylate functionality is presented.This work has been reported in preliminary form at the 4th Royal Society of Chemistry International Symposium on Recent Advances in the Chemistry of-lactam Antibiotics, Churchill College, Cambridge, U.K., 3–6 July 1988.