Spectral and temporal characteristics of metallic nanoparticles produced by femtosecond laser pulses

We study the time of flight optical emission from titanium and tungsten nanosized particles, generated through femtosecond laser-matter interaction in vacuum, in the wavelength spectral range from 300 to 900 nm. Typical spectra consist of broadband structureless signals similar to black body emission from a macroscopic object. Nanoparticles temperature, deduced from their emission spectra, decreases drastically as a function of their time of arrival at a given distance from the target. This behaviour is seen to be independent of individual particle velocities.     

恒载超声雾化制取金属粉末的改进方法

本文提出一种改进的超声雾化制取金属粉末方法。克服了因变幅杆负载变化所引起的粉末产率的周期变化，给出装置的框图及有关的参数和实验结果。     

La5Al3Ni2 – an Intermetallic Phase Observed upon Crystallization of La50Al25Ni25 Metallic Glass

The yet unknown intermetallic phase La₅Al₃Ni₂ was obtained by partially crystallizing amorphous La₅₀Al₂₅Ni₂₅ at 550 K (further heating above 600 K leads to irreversible disappearance of this phase), and its crystal structure was determined from X‐ray powder diffraction data. The crystal structure of the La₅Al₃Ni₂ phase constitutes a new structure type (Cmcm, a = 14.231Å, b = 6.914Å, c = 10.460Å, oC40) and is built from [Al₃Ni₂] chains surrounded by La atoms. In the ternary system La‐Al‐Ni La₅Al₃Ni₂ is located on the section La₅₀Al_50−nNi_n (0 ≤ n ≤ 50) with the binary compounds LaAl and LaNi as end members. Strikingly, also the crystal structures of the end members can be conceived as chain structures with Al and Ni chains surrounded by La, respectively.     

Modelling of squeal noise attenuation of ring damped wheels

The called vibratory instability squeal that appears in narrow curve or in end of braking is today uncontrolled and produced a high pitched noise very intense and unbearable. Many systems have been developed to limit acoustic emissions and particularly the metallic ring damping solution. Attenuation can reach 20 dB depending on the wheel type (Corail, safety wheel, etc.). However, the question is why this system has a various efficiency even on similar wheels and if this solution may be optimized. The aim of this paper is to understand the attenuation mechanisms of the ring dampers. Wheel modes susceptible to squeal are highlighted and numerical models are developed in order to simulate how the acoustic attenuation occur.     

Numerical calculations of temperature distribution of double layer metallic surface treated by laser beams

A mathematical model of laser beam treatment of double layer alloys (Ni/Fe, Al/Fe and Cr/Fe systems) describing the effect of laser beam on different physical and geometrical parameters of coated layer system has been adapted. The numerical solutions of the non-homogeneous heat-transport differential equation could estimate the temperature of the treated region.The suggested model allows investigation of the temperature distribution as a function of treated surface and laser parameters. The physical parameters of the treated materials were taken as functions of temperature due to the change in the temperature of the treated double layer materials.     

Ultrathin Fe film on Cu(0 0 1): Exchange splitting of image states from first principles

The theoretical investigation of the image states in front of an ultrathin iron film grown on copper has been performed by means of the embedding method and a recently developed procedure for the inclusion of the image potential tail in a first principle calculation. From the electronic response to an applied electric field, the image plane position has been evaluated. This also allows one to obtain useful information about the spin dependent screening properties of the system. Exchange splitting, effective mass, and lifetime of such surface states result in good agreement with recently performed two-photon photoemission experiments [see A.B. Schmidt, M. Pickel, M. Wiemhöfer, M. Donath, M. Weinelt, Phys. Rev. Lett. 95 (2005) 107402].     

Effect of various adsorbates in dephasing and population decay of the Cu(1 0 0) image potential states

A theoretical study of the electron dynamics in image potential states on Cu(1 0 0) surfaces with different types of adsorbates is presented. Scattering of the image state electron by an adsorbate induces inter-band and intra-band transitions leading respectively to the population decay and to the dephasing of the image state. We compare results obtained with low coverage (typically 1 adsorbate atom per 1000 surface atoms) Cs, Ar, and a model electronegative adsorbates. As follows from our results, Cs adsorbates lead to both appreciable dephasing and decay, while electronegative adsorbates mostly affect the dephasing rate. The effect of low coverage Ar adsorbates is small, consistent with their neutrality.     

New feature in the Auger peak of adsorbed oxygen

Recent joint theoretical and experimental investigations of Auger core-core-valence spectra of alkali adatoms on simple metals have revealed that such technique is capable to ascertain contributions from different adsorption environments in the signal [M.I. Trioni, S. Caravati, G.P. Brivio, L. Floreano, F. Bruno, A. Morgante, Phys. Rev. Lett. 93 (2004) 206802]. Consequently, to verify if such an effect is present also for other chemical species, we study theoretically the KLV transition of oxygen either as a bulk impurity or as an adsorbate in/on Al and Ag (jellium-like). We make use of the Fermi golden rule in which the matrix elements of the interaction are calculated within DFT. We verify that the relevant physical quantity of this phenomenon is the excited local density of states (LDOS), calculated within a region centered on the core ionized atom. The Auger rate for oxygen in Ag bulk displays a single asymmetric peak, while for adsorbed oxygen a second smaller feature at lower energies, and very close to the first one, appears. This unexpected result follows from the removal of the degeneracy of the m quantum number of the 2p states of oxygen at the surface. It is only displayed on the electronically less dense metal (Ag), but not on Al.     

K＋－SrO－La_2O_3／ZnO催化剂上甲烷氧化偶联反应Ⅰ．催化活性和反应气中添加CO_2的影响

Ｋ＋┐ＳｒＯ┐Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷氧化偶联反应＊Ⅰ．催化活性和反应气中添加ＣＯ２的影响余林徐奕德＊＊郭燮贤（中国科学院大连化学物理研究所催化基础国家重点实验室，大连１１６０２３）关键词钾离子，氧化锶，氧化镧，氧化锌，金属氧化物催化剂，甲烷，...     

Behavior of zirconium in the ZrOW(100) system at high temperature, studied by ISS, AES and work-function measurements

The behavior of zirconium atoms at the W(100) surface associated with oxygen adsorption at different sample temperatures has been studied by Auger electron spectroscopy (AES), ion scattering spectroscopy (ISS), and the relative change of the work function (Δф) measured by the onset of the secondary electron energy distribution. The results have revealed: (i) adsorption of zirconium onto the W(100) surface followed by the elevation of the sample temperature up to 1710 K in an oxygen partial pressure of 2.7 × 10⁻⁴ induces complete diffusion of zirconium atoms into the W(100) substrate; (ii) further exposure of oxygen induces co-existence of oxygen and tungsten on the surface at 1710 K, resulting in a work function of 4.37 eV; (iii) keeping the sample temperature at 1710 K, simple evacuation of the system has resulted in surface segregation of zirconium atoms to the surface to form a zirconium atomic layer on the top-most surface, reducing the work function to 2.7 eV. The results have revealed that this specific behavior of zirconium atoms at high temperature assures, with very good reproducibility, the highly stable performance and long service life of Zr---O/W(100)-emitters in practical use, even in a low vacuum of 10⁻⁶ Pa.