胶体晶体自组装常用方法的研究进展

胶体自组装是制造大面积胶体晶体的高效方法,对制备各种功能胶体晶体材料具有十分重要的意义,在微纳制造、新材料、能源、医学等领域有巨大的应用潜力.对胶体自组装过程中涉及的各种作用力进行了详细分析,归纳了胶体晶体自组装的基本方法.面向制造大面积胶体晶体,阐述了几类代表性的新型胶体晶体自组装方法,包括温度辅助、模板辅助、表面活性剂辅助、旋涂法与界面转移相结合等,分析了不同方法的影响因素、优缺点和未来的改良方向,并介绍了在完整单层膜基础上制造三维胶体晶体的工艺方法.为提高胶体晶体制造质量和效率、拓宽胶体自组装技术的应用提供必要参考.     

A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

Improved Performance of Solid-State Gratzel Solar Cell by Cosensitization of Quantum Dot and Dye

We report a new cosensitization utilizing quantum dot (QD) PbS and Cis-(SCN)2Bis(2,2‘-bipyridyl-4,4‘-dicarboxylate) ruthenium (N3) dye on the nanoporous Ti02 film. Solid-state Gratzel solar cells with the cosensitized films show an improved overall efficiency by 200% relative to the cells assembled with only N3 sensitization and an extremely high open-circuit voltage of 840mV, and a fill factor of 70.5~. Back reaction characteristics of the above cells are also investigated, demonstrating a great suppression of recombination due to cosensitization. It seems that the cosensitization also facilitates the electron injection into the conduction band of TiO2.     

胶体颗粒大小的分布——Ⅱ.物理显影中胶体催化剂颗粒大小的分布函数

本文用对数正态分布对物理显影中常用的Au、Ag及Ag_2s胶体催化剂的颗粒大小的实验分布进行了拟合。理论分布与实验分布的比较表明:本实验条件下制备的十二组胶体溶液其颗粒大小都服从了对数正态分布,并且不依赖于胶体的组成、大小及制备方法。因此,它们很可能遵从了同样的成核成长规律。     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

Electrical Potential Distribution around a Charged Colloidal Particle: Nonlinear Integral Equation

多电解质溶液中带电胶体粒子的电势分布由球形Ｐｏｉｓｓｏｎ－Ｂｏｌｔｚｍａｎｎ方程（ＰＢＥ）描述．ＰＢＥ是一个非线性的微分方程，且难以求得其解析解．本文采用非线性Ｐ－Ｂ积分方程，计算电势分布的数值解．首先，根据静电场和热力学系统中的物理定理，导出描述电势分布的Ｐ－Ｂ积分方程（ＰＢＩＥ）；其次，用迭代方法求ＰＢＩＥ的数值解．最后，计算了在３－１型电解液中无量纲半径κａ分别为０．１２和０．２２，无量纲表面电势ξ分别为１，２，４，６时球形胶体粒子外部的电势值．为了检验数值解的精度，计算了表面电荷密度，并与Ｌｏｅｂ（１９６１）和Ｏｓｈｉｍａ（１９９５）等人的结果比较，本文结果的相对误差小于１％，优于Ｏｓｈｉｍａ的结果．     

胶体及粗分散系统混合焓的来源和意义

胶体及粗分散系统混合焓的来源和意义贺占博（天津大学化学系３０００７２）现行的工科化工类物理化学教材［１，２］在有关热力学计算与动力学分析中都忽略了混合热力学函数。因而在某些非理想情况下，理论计算值会与实际测量值产生较大的偏差，尤其是在胶体分散系统和粗...     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

胶体晶体

简要综述胶体晶体的研究进展情况,主要介绍胶体粒子的简单自组装、模板引导下的自组装和二元胶体晶体组装等几类主要的胶体晶体制备技术,并概述胶体晶体在光子晶体、传感器、光子纸张、三维有序大孔材料、二维纳米结构阵列等方面的应用。     

无机胶体法制备Pt/C催化剂及其性能表征

采用无机胶体法制备用于质子交换膜燃料电池(PEMFC)的Pt/C催化剂。研究了影响PtO₂胶体生成和稳定性的因素(溶液的pH值、浓度和温度条件等)以及不同还原剂浓度对Pt/C催化剂性能的影响。透射电子显微镜测试结果表明，采用经优化的工艺条件所制备的Pt/C催化剂平均粒径为3 nm，且分散性好、粒度均匀。X-射线衍射分析表明，催化剂中Pt(111)晶面的相对含量较高，有利于加速氧还原反应。单体PEMFC的电压/电流密度曲线测试表明，所制备的Pt/C催化剂具有良好的电化学性能。