有机薄膜器件负电阻特性的影响因素

研究了影响有机染料掺杂聚合物薄膜器件负电阻特性的因素，为探索有机负电阻的机理提供实验依据。实验中制备了多种有机染料掺杂聚合物薄膜器件，研究了有机小分子染料、聚合物基体、薄膜组成及厚度、ITO和聚苯胺阳极等对有机染料掺杂聚合物薄膜器件负电阻特性的影响。在室温、大气环境下，所制备的多种有机染料掺杂聚合物器件在所加电压为3～4V时，观察到明显的负电阻特性，电流峰谷比最大约为8。负电阻现象及峰谷比的大小受膜厚和器件的结构、制备工艺等影响。提出用负电阻和二极管并联组成的等效电路模型解释影响负电阻特性的因素，认为负电阻特性与载流子的不平衡注入有关。在此基础上设计、合成了主链含唔二唑电子传输基团的可溶性聚对苯撑乙烯衍生物，该聚合物兼具空穴和电子传输功能，在空气中具有较稳定的N型负电阻特性。进一步控制相关材料和工艺条件，有可能得到易于控制的负阻效应，开发出新型的有机负电阻器件。     

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制马於光，薛善华，黄劲松，田文晶，刘式墉，沈家骢，刘晓冬（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学，长春，１３００２３）关键词聚合物，发光...     

A Transparent Thin Film with Hexagonal Mesostructure Containing Rhodamine 6G

A transparent this film was prepared by depositing the sol-gel mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G(R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure,was composed of nanocrystallites about 35 nm in diameter and 1-10μm in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover,optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.     

三维树枝状C/PbWO4催化剂的制备及其对不同染料的光催化降解性能

采用水热法合成了一种高结晶度的3D树枝状C/PbWO₄复合光催化剂（其中碳的质量分数分别为0.13%、0.26%、0.52%、0.78%）。应用X射线衍射、N₂物理吸附、扫描电子显微镜、透射电子显微镜、能量色散X射线光谱、紫外可见漫反射光谱、光致发光光谱和光电流响应等手段对合成样品进行了表征。研究结果表明,当C的复合量为0.52%时,催化剂在降解偶氮染料酸性橙Ⅱ、甲基橙和罗丹明B呈现出最高的光催化活性,在光照100 min内对20 mg·L^-1酸性橙Ⅱ的降解率达到97%,为纯PbWO₄的2.48倍。C/PbWO₄复合光催化剂活性提高的主要原因是掺杂在催化剂表面的C成为了电子俘获中心,有效俘获光生电子,促进光生电子和空穴分离的显著效果,从而产生更多活性物种（·OH、h⁺）参与染料分子的降解,提升光催化活性。     

基于4-氨基-1,2,4-三唑和多金属氧酸盐为杂化配体的CuⅡ和CuⅠ配合物的水热合成及光催化性能

在水热条件下,制备了2个基于多金属氧酸盐（POM）的Cu^Ⅱ和Cu^Ⅰ新型杂化配合物材料,即[Cu₂（4-NH₂-trz）₄（Mo₈O₂₆）（H₂O）₄]·5H₂O（1）和[Cu₄（4-NH₂-trz）₄Mo₈O₂₆]（2）（4-NH₂-trz=4-氨基-1,2,4-三唑）。通过单晶X射线衍射、傅里叶变换红外光谱和粉末X射线衍射分析确定了它们的结构。在配合物1中,4-氨基-1,2,4-三唑双齿配体连接2个相邻的Cu^Ⅱ中心形成双核结构单元,这些双核结构单元进一步通过Mo₈O₂₆^4-连接形成一维（1D）的杂化配位结构。在配合物2中,4-氨基-1,2,4-三唑双齿配体连接相邻Cu^Ⅰ中心构筑了独特的[Cu₄（4-NH₂-trz）₄]_n一维螺旋链,这些左手和右手的一维螺旋链再通过（β-Mo₈O₂₆）^4-连接形成2D杂化骨架。光催化实验研究表明,样品1和样品2对于不同有机染料（亚甲基蓝（MB）、罗丹明B（RhB）和甲基橙（MO））具有很好的光催化降解能力。     

新型低共熔溶剂的制备及其在分散液-液微萃取水样中臧红T和胭脂红的应用EI北大核心CSCD

建立了一种基于低共熔溶剂的旋涡辅助分散液-液微萃取和高效液相色谱连用检测水样中臧红T和胭脂红染料的方法。制备了一类分别由苄基三乙基溴化铵、苄基三丁基溴化铵、苄基三乙基氯化铵或苄基三丁基氯化铵(氢键受体)和正辛酸(氢键供体)组成的新型疏水性低共熔溶剂。最佳萃取条件为:选取苄基三丁基氯化铵和正辛酸(摩尔比为1∶2)制备的低共熔溶剂为萃取剂,萃取剂用量为75μL,萃取时间为1 min,溶液pH=7,NaCl浓度为3 mg/mL。在最优化条件下,检测臧红T和胭脂红的线性范围为4.8~1000 ng/mL;相关系数(R^(2))分别为0.9981和0.9987;检出限分别为1.5和1.8 ng/mL;定量限均为4.8 ng/mL。将该方法应用于实际水样中臧红T和胭脂红的测定,加标回收率为88.5%~113.6%,相对标准偏差均低于8.8%。     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

多孔柿饼状BiOBr光催化剂的简易溶剂热法合成（英文）

以硝酸铋和十六烷基三甲基溴化铵(CTAB)为Bi和Br源,采用聚乙烯吡咯烷酮(PVP)辅助溶剂热法首次成功制备了多孔纳米片聚结的柿饼状溴氧化铋(BiOBr)。通过多种分析技术对分级微米结构BiOBr材料的物化性质进行了表征,并对其在可见光照射下降解亚甲基蓝(MB)的光催化活性进行了评价。结果表明,溶剂热时间和PVP的加入量对产物的颗粒形貌和结晶度有显著影响。当加入0.7 g PVP时,120℃溶剂热处理12 h,可得到多孔纳米片聚结的柿饼状BiOBr样品。多孔柿饼状BiOBr样品的比表面积为4 m2·g^-1,带隙能为2.64 eV,在可见光区具有较强的光吸收性能,具有良好的可见光驱动降解MB的光催化活性和稳定性。我们推断,多孔纳米片聚结的柿饼状BiOBr样品具有优良的可见光催化性能,这与该样品的较高比表面积、多孔结构、低带隙能以及独特的颗粒形貌有关。