氮、硫共掺杂的碳负载的钴@碳化钴:一种高效的非贵金属氧还原电催化剂

Development of high-efficiency and low-cost electrocatalysts for large-scale oxygen reduction reaction (ORR) remains a challenge. In this study, we employed melamine, trithiocyanuric acid, and cobaltous nitrate to fabricate a novel ORR electrocatalyst with cobalt and cobalt carbide supported on carbon co-doped with nitrogen and sulfur (hereafter referred to as MTC-0.1-900) by two-step pyrolysis. The MTC-0.1-900 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) specific surface area analysis, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance for ORR was investigated by cyclic voltammetry and linear sweep voltammetry in 0.1 mol·L^-1 KOH solutions. The results showed that the onset potential and half-wave potential of MTC-0.1-900 were 29 and 5 mV superior to the commercial Pt/C catalyst, respectively. After 12000 s operation at the potential of -0.3 V (vs Ag/AgCl), the current retention capacities of MTC-0.1-900 and Pt/C were 97.1% and 76.7%, respectively. MTC-0.1-900 also showed better methanol tolerance than Pt/C. These unique properties of MTC-0.1-900 provide us with an alternative for replacing or reducing the use of Pt catalyst in metal-air battery cathode materials.     

石墨烯-氧化钨复合薄膜的制备及界面电子传输特性

以偏钨酸铵为钨源、聚乙烯吡咯烷酮为连接剂,采用浸渍提拉法制备了石墨烯-氧化钨复合薄膜,利用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）及Raman光谱等方法对复合结构材料进行了表征,并利用光电流测试、交流阻抗谱（EIS）、瞬态光电流谱和强度调制光电流谱等方法,研究复合薄膜电极在光电作用下界面上的载流子转移过程和电荷传输行为. 结果表明,组成薄膜的氧化钨纳米颗粒与石墨烯充分复合,光电性能显著提高;与石墨烯复合后,薄膜的瞬态时间常数增大,电子-空穴对寿命延长;电子传输时间减少,为纯氧化钨薄膜的47.5%.     

聚合物前驱体法制备立方相WO_3薄膜的光电化学性质

以(NH4)6W7O24·6H2O为钨源,聚乙二醇1000(PEG 1000)为配位聚合物,采用聚合物前驱体法制备了WO3薄膜,利用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见(UV-Vis)吸收光谱等手段对其结构进行表征.采用循环伏安法、Mott-Schottky测试、瞬态光和稳态光电流谱等方法研究了WO3薄膜电极的光电化学性能.结果表明,制备的WO3薄膜为立方晶系,禁带宽度约为2.7eV.当热处理温度为450℃时,载流子浓度达到最大2.44×1022cm-3,平带电位为0.06V,在500W氙灯光源照射和1.2V偏压下,光电流密度为2.70mA·cm-2.进一步探讨了热处理温度对其光电性质的影响及其机理.     

Recent progress of on-resin cyclization for the synthesis of clycopeptidomimetics

Cyclopeptidomimetics are class of cyclopeptides with unnatural linkage. They usually displayed unique constrained structure, enhanced proteolytic stability, and other drug-like character; and have been widely used in medicinal chemistry. Therefore, development of efficient strategies for the synthesis of cyclopeptidomimetics has received many attentions. On-resin cyclization strategy is one of the effective approaches developed to overcome the competing side reaction such as oligomerization and cyclooligomers occurred in solution cyclization. This approach took advantage of the ‘‘pseudo-dilution'effect to avoid these undesired by-products and greatly simplified the downstream product purification process. This review summarized the recent on-resin peptide cyclization strategies for the synthesis of cyclopeptidomimetics.     

Studies,on the synthesis,structure, IR spectra and reactivity of a new dinuclear Mo(0) complex, [Et4N]2[Mo2(CO)8(SCH2CO2Et)2]

Reaction of Et₄NI, NaSCH₂CO₂Et and Mo(CO)₆ in CH₃CN affords a new dinuclear molybdenum (0) complex, [Et₄N]₂[Mo₂(CO)₈(SCH₂CO₂Et)₂] (1). Electrochemistry and reactivity investigation indicate that 1 undergoes an interesting two-electron oxidation in a single step (-0.43 V) and a substitution of its carbonyls by coordinating solvents resulting in two kinds of Mo(I)-complexes, Mo₂(CO)₈(SCH₂CO₂Et)₂ and (Mo₂(CO)₆SCH₂CO₂Et)₂(CH₃CN)₂. vC=O and vMo-CO have been assigned. The crystal and molecular structure has been determined from three-dimensional X-ray data. 1 crystallized in the triclinic, space group with a=10.362(1), b=10.391(1), c= 10.815(2)Å; α=91.64(2)°, β=100.07(2)°, γ=114.46(1)°; Z=1; R=4.8% for 2975 reflections with I>3σ(I). Nonbonding of Mo … Mo [3.939(1)Å] and the configuration of MoS₂Mo unit in 1 are very different from those in related Mo(I)-product. These results confirm our previous speculation that the two-electron character derives from creation or cleavage of a metal-metal single bond coupled with structural rearrangement in a bridged bimetallic center.     

Heuristic molecular lipophilicity potential (HMLP): lipophilicity and hydrophilicity of amino acid side chains

Heuristic molecular lipophilicity potential (HMLP) is applied in the study of lipophilicity and hydrophilicity of 20 natural amino acids side chains. The HMLP parameters, surface area S(i), lipophilic indices L(i), and hydrophilic indices H(i) of amino acid side chains are derived from lipophilicity potential L(r). The parameters are correlated with the experimental data of phase-transferring free energies of vapor-to-water, vapor-to-cyclohexane, vapor-to-octanol, cyclohexane-to-water, octanol-to-water, and cyclohexane-to-octanol through a linear free energy equation DeltaG(0)(tr,i) = b(0) + b(1)S(i) (+) + b(2)S(i) (-) + b(3)L(i) + b(4)H(i). For all above six phase-transfer free energies, the HMLP parameters of 20 amino acid side chains give good calculation results using linear free energy equation. HMLP is an ab initio quantum chemical approach and a structure-based technique. Except for atomic van der Waals radii, there are no other empirical parameters used. The HMLP has clear physical and chemical meaning and provides useful lipophilic and hydrophilic parameters for the studies of proteins and peptides.     

激光解吸电离质谱新型液相基质研究

选用包括纳米粒子在内的多种基质化合物,构成了多种不同组成的液相基质.以多肽、蛋白、大环寡糖和有机小分子等数种类型化合物为样品,系统地考察了不同液相基质在基质辅助激光解吸电离飞行时间质谱(MALDI-TOF)分析中的应用情况,探讨了与固体制样方法的异同点.实验结果表明,有些液相基质对多类化合物具有较好的通用性,而有些液相基质对某些特定类型化合物的分析特别有效.     

煅烧温度对阳极氧化WO3多孔薄膜的形貌及光电化学性能的影响

采用一步式阶跃电压加压方法,在NH4F/(NH4)2SO4电解质溶液中对W片进行阳极氧化处理制备了WO3多孔薄膜,通过后续热处理温度的控制,制备了性能规律性变化的WO3多孔纳米薄膜材料.用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)分析等手段考察了热处理温度对氧化钨晶体结构和形貌影响的规律,在450°C以下的煅烧温度下,薄膜保持50-100nm孔径;通过对光电化学性质、光催化降解甲基橙动力学行为的研究,考察了不同热处理温度对WO3多孔薄膜光电转换性能影响的规律.研究表明,450°C煅烧处理后的WO3薄膜在500W氙灯光源照射及1.2V偏压下,光电流密度达到5.11mA·cm-2;340及400nm单色光辐射下光电转换效率(IPCE)值分别达到87.4%及22.1%.电化学交流阻抗谱显示,450°C煅烧处理后的WO3薄膜表现出最佳的导电率及最小的界面电荷转移电阻.实验结果证明,高结晶度的多孔结构是WO3薄膜具有高光电转换效率的主要因素,控制热处理温度是实现薄膜具有高孔隙率、完整结晶度、低电阻的重要手段.     

Qualitative Analysis of Maize Haploid Kernels Based on Calibration Transfer by Near-Infrared Spectroscopy

Haploid breeding is one of the most important modern crop selection technologies. Near-infrared spectroscopy (NIRS) has been used to identify haploids rapidly and to non-destructively accelerate the selection process. However, the change of the external environment weakens the performance of the model, as the training and the test spectra may be collected separately from different environments. Thus, a novel calibration transfer method is proposed to calibrate the model in order to reduce the impact of the environment. The near-infrared spectra of 400 maize kernels of two varieties were collected from 9000 to 4000?cm^?1. Principal component analysis was performed to construct a feature space and extract features. In the constructed feature space, the calibration transfer method was used to calibrate test sets. Finally, support vector machine was employed to establish a haploid identification model. The results show that when the spectra of the test set and the training set were collected in the same environment, the corrected acceptance of the model was above 90%. While the spectra of the test set and the training set were collected from different environments, the corrected acceptance was 77.87%. However, when the model used the calibration transfer method, the corrected acceptance increased by 12.46%. Moreover, compared with direct standardization, this calibration transfer method achieved better results without detailed sample chemical information and many standards. The results demonstrate that the calibration transfer method based on NIRS was effective for identifying maize haploid kernels in variable environments.     

红松种子抑制物质的提取、分离和鉴定

本文研究了红松种子抑制物质的提取、分离、提纯和鉴定的方法,并比较了用水和不同有机溶剂提取的效果.通过纸层析、薄板层析、生物测定、显色反应、气相色谱和紫外光谱的测定,证明红松种子主要的抑制物质是脱落酸.从而为研究打破红松种子休眠提供了理论依据.此外还验证了脱落酸在紫外光不同时间照射下,含量所发生的变化.