Yb3+掺杂KY(WO4)2激光晶体生长、结构与光谱分析

采用顶部籽晶提拉法(TSSG)生长出Yb:KY(WO₄)₂(Yb:KYW)激光晶体.对预烧后的原料及晶体进行了XRD分析，结果表明，分别在920℃和600℃预烧8h后的熔质和助熔剂基本上形成一相，抑止了实验中的挥发问题；所生长的晶体为β-Yb:KYW，计算其晶格常数为a=1.063nm，b=1.034nm，c=0.755nm，β=130.75°.测得不同厚度样品的吸收光谱，结果表明样品在933nm和981nm有较强的吸收峰，计算出主峰981nm的吸收截面σ关键词： Yb:KYW TSSG法 晶体结构 光谱参数     

三维列联表精确概率检验之探讨

当样本较小时,列联表分析需作精确概率检验.本文着重就三维列联表讨论多维列联表的精确概率检验方法,并讨论了可用观察频数直接算得概率值的条件.     

周期性梯度折射率多层膜的软X射线反射率

由于界面互扩散的存在，实际的超薄多层膜很难具有清晰的界面结构.假设超薄多层膜为具有周期性梯度折射率的多层膜结构，用直线模型和余弦模型模拟了周期性梯度折射率多层膜的软X射线反射率.结果证明，折射率余弦渐变的多层膜虽然不具有清晰的界面，但它同样具有很高的反射率.     

一种不等带宽光学梳状滤波器

提出了一种新型—Michelson—三面镜FabryPerot型50GHz不等带宽光学梳状滤波器设计方案,分析和模拟表明:该器件将一路信道间隔为50GHz的输入信号分离成信道间隔为100GHz的奇偶两路输出信号,其中在3dB处,奇数信道带宽大于30GHz用于10Gb/s传输,偶数信道带宽大于60GHz用于40Gb/s传输对于将来的40Gb/s系统,该器件具有优势.     

半导体激光自混频干涉式传感器中的干涉与调制

应用F-P模型，阐述了半导体激光自混频干涉式传感器的干涉与调制过程，同时给出了相应的计算．     

Harmonic beam splitter design and fabrication

Two problems of half-wave hole and high ripples in the transmittance region for a harmonic beam splitter had been pointed out and analyzed. Based on the application of a half-wavelength control and a new admittance matching methods, a harmonic beam splitter was designed and fabricated. The former method eliminated the half-wave hole fundamentally, and the latter smoothed high ripples in the transmittance region effectively. The matching stack consisted of a symmetrically periodic structure and provided a complete matching at the desired wavelength, i.e., both conditions for the equivalent admittance and phase thickness were fulfilled. Furthermore, both the theoretical and the tested curves had been given, and a good agreement between them was obtained.     

Structure and Photoluminescence of Nano-ZnO Films Grown on a Si （100） Substrate by Oxygen- and Argon-Plasma-Assisted Thermal Evaporation of Metallic Zn

Nano-ZnO thin films were prepared by oxygen- and argon-plasma-assisted thermal evaporation of metallic Zn at low temperature, followed by low-temperature annealing at 300℃ to 500℃ in oxygen ambient. X-ray diffraction patterns indicate that the nano-ZnO films have a polycrystalline hexagonal wurtzite structure. Raman scattering spectra demonstrate the existence of interface layers between Zn and ZnO. Upon annealing at 400℃ for i h, the interface mode disappears, and photoluminescence spectra show a very strong ultraviolet emission peak around 381 nm. The temperature-dependent PL spectra indicate that the UV band is due to free-exciton emission.     

贝壳固硫过程热重研究

利用LCT-2型热天平对贝壳的固硫反应过程进行了实验研究。探讨了贝壳在含SO2模拟烟气气氛下的固硫能力、温度特性及SO2浓度对其钙利用率的影响特性;并利用JXA-840扫描电镜实验观察了贝壳与石灰石微观结构特性的主要差别。结果表明:贝壳具有良好的微观结构特性和固硫反应活性,其最佳固硫反应温度比石灰石高出约100℃,大部分贝壳更适合作900~1000℃温度下的燃煤固硫剂。     

Interface roughness, surface roughness and soft X-ray reflectivity of Mo/Si multilayers with different layer number

A series of Mo/Si multilayers with the same periodic length and different periodic number were prepared by magnetron sputtering, whose top layers were respectively Mo layer and Si layer. Periodic length and interface roughness of Mo/Si multilayers were determined by small angle X-ray diffraction (SAXRD). Surface roughness change curve of Mo/Si multilayer with increasing layer number was studied by atomic force microscope (AFM). Soft X-ray reflectivity of Mo/Si multilayers was measured in National Synchrotron Radiation Laboratory (NSRL). Theoretical and experimental results show that the soft X-ray reflectivity of Mo/Si multilayer is mainly determined by periodic number and interface roughness, surface roughness has little effect on reflectivity.     

有限长FGM圆筒的热/机应力的解析解

利用微分方程的级数求解方法,分析了两端简支的有限长功能梯度圆筒的轴对称稳态热弹性问题,推导出了稳态温度场与应力场的解析解。分析中采用指数函数模型来描述FGM圆筒中材料性能在厚度方向的连续变化,同时忽略温度对材料性能的影响。另外,论文以金属钼和多铝红柱石制成的功能梯度圆筒为例,给出了稳态温度场和应力场的数值结果。