Graphene Saturable Absorber Mirror for Mode-Locked Orange Pulse Laser

Journal of Russian Laser Research - We demonstrate a passively-mode-locked Pr3+: LuLiF4 laser operated at the 604 nm orange wave-length, using monolayer graphene as a saturable absorber. The...     

基于局域分析的疲劳短裂纹群体演化随机模型

采用局域裂纹数密度描述金属材料中不同局部区域的疲劳短裂纹群体损伤的发展情况通过考虑在不同局域存在的材料性质的随机涨落及局部损伤对损伤总量发展的影响，建立了局域裂纹数密度演化随机方程对方程数值求解从而模拟了材料的疲劳短裂纹损伤过程结果显示出主裂纹出现的随机性，并讨论了裂纹总数与最大裂纹尺度在统计意义上的演化特征     

Feasibility study on buoyancy–weight ratios of a submerged floating tunnel prototype subjected to hydrodynamic loads

The research progress of a novel traffic solution,a submerged floating tunnel(SFT),is reviewed in terms of a study approach and loading scenario.Among existing publications,the buoyancy-weight ratio(BWR) is usually predefined.However,BWR is a critical structural parameter that tremendously affects the dynamic behaviour of not only the tunnel tube itself but also the cable system.In the context of a SFT prototype(SFTP) project in Qiandao Lake(Zhejiang Province,China),the importance of BWR is illustrated by finite element analysis and subsequently,an optimized BWR is proposed within a reasonable range in the present study.In the numerical model,structural damping is identified to be of importance.Rayleigh damping and the corresponding Rayleigh coefficients are attained through a sensitivity study,which shows that the adopted damping ratios are fairly suitable for SFTP.Lastly,the human sense of security is considered by quantifying the comfort index,which helps further optimize BWR in the SFTP structural parameter design.     

Effect of atmospheric parameters on fine particulate concentration in suburban Shanghai

A study was conducted on the effect of atmospheric parameters,including temperature,wind speed,and relative humidity,on fine particulate mass concentrations measured in Jiading District of Shanghai,China, during the period from January 2009 to January 2010.A sensitivity analysis was applied to investigate the interaction between atmospheric parameters and particulate mass concentration.The experiment revealed that the concentration of particulates increased with particle size from 0.1 to 1.0μm,and decreased with the increase of particle size from 1.0 to 2.5μm.The effects of atmospheric parameters on fine mass concentrations were significantly particle size-dependent.The PM_1.0-2.5 may come from the size increase of smaller particulates after moisture absorption.And the variation of concentrations of PM_0.1-1.0 was mainly attributed to the accumulation of PM_0.1.The ventilation index and dilution index were calculated on the basis of data collected in December 2009.A correlation analysis indicated that there was a significant relation between these two indexes and the particulate concentration by examining the three particle size ranges,0.0-0.1,0.1-1.0,and 1.0-2.5μm.The Spearman correlation coefficients that related the ventilation index to the concentration for the three particle size ranges were -0.45,-0.56 and -0.47, respectively,while the coefficients that related the dilution index to the concentration were -0.36,-0.42 and -0.45,respectively.     

Equipping Natural Killer Cells with Specific Targeting and Checkpoint Blocking Aptamers for Enhanced Adoptive Immunotherapy in Solid Tumors

Herein, we propose an aptamer‐equipping strategy to generate specific, universal and permeable (SUPER) NK cells for enhanced immunotherapy in solid tumors. NK cells were chemically equipped with TLS11a aptamer targeting HepG2 cells and PDL1‐specific aptamer without genetic alteration. The dual aptamer‐equipped NK cells exhibited high specificity to tumor cells, resulting in higher cytokine secretion and apoptosis/necrosis compared to parental or single aptamer‐equipped NK cells. Interestingly, dual aptamer‐equipped NK cells induced remarkable upregulation of PDL1 expression in HepG2 cells, enhancing checkpoint blockade. Furthermore, in vivo intravital imaging demonstrated high infiltration of aptamer‐equipped NK cells into deep tumor region, leading to enhanced therapeutic efficacy in solid tumors. This work offers a straightforward chemical strategy to equip NK cells with aptamers, holding considerable potential for enhanced adoptive immunotherapy in solid tumors.     

Application of enthalpy method for moving boundary problem in laser surface melting

A numerical analysis was carried out to study the moving boundary problem in the physical process of pulsed Nd-YAG laser surface melting prior to vaporization. The enthalpy method was applied to solve this two-phase axisymmetrical melting problem. Computational results of temperature fields were obtained, which provide useful information to practical laser treatment processing. The validity of enthalpy method in solving such problems is pressented. Supported by the National Natural Science Foundation of China and the Chinese Academy of Sciences     

郑哲敏对应用力学和技术科学的贡献

2004年10月2日是我们尊敬的郑哲敏先生八十华诞．是年9月29日,中国科学院力学研究所举办了隆重热烈的“祝贺郑哲敏先生八十华诞应用力学学术报告会”,来自全国各地和海外的200多名专家学参与了报告会．同时,科学出版社出了两本书．一本是《郑哲敏集》,另一本是《应用力学进展》,前是郑哲敏先生从事科技事业50余年的代表性论汇编,后是祝贺郑哲敏先生八十华诞应用力学学术报告论集。     

Solvothermal synthesis of CdS nanowires using L-cysteine as sulfur source and their characterization

An effective solvothermal reaction route has been developed for large-scale synthesis of CdS nanowires. L-cysteine was used as both sulfur source and capping reagent. The nanowires obtained were characterized by XRD, SEM, TEM, HRTEM, UV-Vis and PL. On the basis of time-resolved experiments, a possible growth mechanism was proposed. FTIR analysis confirmed the formation of Cd-cysteine complex and peptide during the reaction. The mechanism was further supported by comparative experiments with other sulfur sources. Electronic supplementary material The online version of this article (doi: ) contains supplementary material, which is available to authorized users. PACS 81.05.Bx; 81.07.-b; 81.07.BC; 81.07.Vb; 81.10.Dn     

Microemulsion copolymerization of styrene and acrylonitrile with n‐butanol as the cosurfactant

The microemulsion copolymerization of styrene and acrylonitrile in an n‐butanol/cetyltrimethylammonium bromide/oil/water microemulsion system was studied. The solubilization sites of the two monomers were determined with an NMR technique. The results showed that the solubilization behaviors of the two monomers were quite different. Most of the styrene was solubilized in the palisade layer of the microemulsion, whereas the acrylonitrile had an equilibrium distribution in the aqueous phase and palisade layer of the microemulsion. The reactivity ratios of styrene and acrylonitrile in the microemulsion system were different from those in other media. The effect of the monomer feed composition on the copolymerization kinetics was investigated, and the mechanism of nucleation of the latex particles was examined. The experimental results showed that the copolymerization loci were changed from the microemulsion droplets to the aqueous phase when the concentration of acrylonitrile in the monomer feed reached approximately 80%; this could be further proved by the effect of the monomer feed composition on the copolymerization kinetics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 203–216, 2005     

Synthesis and electronic properties of donor-acceptor pi-conjugated siloles

An efficient method is presented for the synthesis of novel donor-acceptor silole chromophores through selective monohalogenation of 2,5-dimetallosiloles followed by Negishi alkyne cross-coupling reactions. The electronic properties and crystal packing of these new siloles can be controlled through judicious combinations of peripheral functional groups.