The significance of a second adsorption phase with weakly adsorbed species for the calculation of the surface concentrations of a mixture: methanol–DME and methanol–ethene adsorption in SAPO-34

With the calorimetric (adsorption heat versus coverage) curve also measured together with the adsorption isotherm, the simultaneous use of both curves showed that there were two phases of adsorption in the adsorption of methanol, dimethyl ether, ethene and propane in SAPO-34. The dual-site Langmuir equation gave good fits to the adsorption data to support the interpretation that a second (type 2) adsorption phase occurred in the high-pressure region in addition to a first (type 1) adsorption phase on the acid sites at lower pressures. Adsorption experiments and calculations using binary gas mixtures showed that due to the existence of two types of adsorption, the multicomponent Langmuir isotherm equation (Langmuir competitive adsorption model) calculated incorrect surface concentrations when the concentrations were high. In contrast, the ideal adsorbed solution theory (IAST) calculated correct surface concentrations in the adsorption of mixtures.     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Simulation of collisions of two droplets containing two different liquids using incompressible smoothed particle hydrodynamics method

Theoretical and Computational Fluid Dynamics - The present study aims to simulate a collision of two droplets containing immiscible liquids by employing a three- dimensional incompressible smoothed...     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Si PIN X‐ray photon counter

A Si PIN detector for visible light detection, instead of a Geiger‐Müller tube, is applied to X‐ray photon counting. We counted radiation from a checking source of a Geiger‐Müller counter with a Si PIN counter and with a Geiger‐Müller counter. White X‐ray of energy up to 20 keV emitted from a pyroelectric X‐ray emitter was also counted, and the Si PIN X‐ray counter showed a similar curve of count rate versus source distance in both measurements. Pulse counting was performed by spectroscopy circuits. An audio digitizer with computer software for signal processing was also used to simplify the photon counter. A plot of count rate versus time was obtained with this setup. With simple pulse counting circuits, Si PIN X‐ray counters have advantages such as compact structure, low cost and easy application. Copyright © 2011 John Wiley & Sons, Ltd.     

Spin-lattice relaxation times of bound water—Its determination and implications for tissue discrimination

Measurements were made of T1 of bound water (T1b) and bound water fraction () for gelatin solutions and human tissues (sera, brain tumor, cerebral white matter). Bound water fraction in each sample was measured by means of thermal analysis (differential scanning calorimetry: DSC). T1 values were measured by FONAR QED 80-. T1b values were calculated by an equation derived from the fast-exchange two-state model. In the study of gelatin solutions, the relationship between T1 and water content differed depending on the sort of solutions. This was considered to be due to differences in T1b values. In each biological tissue the values of T1b and had different distributions. These results indicate that values of T1b and for biological tissues may be altered in correspondence to the changes in pathophysiological states in those tissues.     

Temporal formation of optical anisotropy and surface relief during polarization holographic recording in polymethylmethacrylate with azobenzene side groups

The formation of polarization holographic gratings with both optical anisotropy and surface relief (SR) deformation was studied for polymethylmethacrylate with azobenzene side groups. Temporal contributions of isotropic and anisotropic phase gratings were simultaneously determined by observing transitional intensity and polarization states of the diffraction beams and characterizing by means of Jones calculus. To clarify the mechanism of SR deformation, cross sections of SR were characterized based on the optical gradient force model; experimental observations were in good agreement with the theoretical expectation. We clarified that the anisotropic phase change originating in the reorientation of the azobenzene side groups was induced immediately at the beginning of the holographic recording, while the response time of the isotropic phase change originating in the molecular migration due to the optical gradient force was relatively slow.     

Real-time monitoring of monochlorinated benzene and polychlorinated biphenyls in the gas phase with on-line detection: High chemical selectivity of resonance-enhanced two-photon ionization.

The development of molecular spectroscopy has enabled us to select chlorinated aromatic hydrocarbons very rapidly. In particular, the laser ionization TOFMS (time-of-flight mass spectrometry) method is expected to be useful as an on-line, selective, and sensitive method. In the present work, real-time laser ionization TOFMS measurements were carried out on gaseous chlorinated aromatic hydrocarbons. The laser ionization method used resonance-enhanced two-photon ionization with the direct introduction of gas into the vacuum chamber. This method for analyzing aromatic hydrocarbons was developed using a pulsed supersonic molecular beam method. In the context of developing a highly selective and sensitive method, excitation of monochlorinated benzene at lambda = 263.07 nm was found to be effective in the wavelength region from 263 nm to 265 nm. Also the excitation of polychlorinated biphenyls at lambda = 266 nm was found to be substantially more effective than at lambda = 280, 300 or 320 nm. The achievable sensitivity for real-time (1 min) measurements using the laser ionization TOFMS technique was found to be in the ppbV range.