Clinical Perspectives of Theranostics

Theranostics is a precision medicine which integrates diagnostic nuclear medicine and radionuclide therapy for various cancers throughout body using suitable tracers and treatment that target specific biological pathways or receptors. This review covers traditional theranostics for thyroid cancer and pheochromocytoma with radioiodine compounds. In addition, recent theranostics of radioimmunotherapy for non-Hodgkin lymphoma, and treatment of bone metastasis using bone seeking radiopharmaceuticals are described. Furthermore, new radiopharmaceuticals for prostatic cancer and pancreatic cancer have been added. Of particular, F-18 Fluoro-2-Deoxyglucose (FDG) Positron Emission Tomography (PET) is often used for treatment monitoring and estimating patient outcome. A recent clinical study highlighted the ability of alpha-radiotherapy with high linear energy transfer (LET) to overcome treatment resistance to beta--particle therapy. Theranostics will become an ever-increasing part of clinical nuclear medicine.     

Several contributions to soil compactibility induced by cyclic loading test

To investigate the soil compactibility during the cyclic loading, three different kinds of paddy field soils were prepared so as to clarify interrelationships among stress amplitude ratio, bulk density, soil water content and pore water pressure. The presetting values of specimen include the soil water content(percent dry basis) and bulk density of 25% d.b. and 1.1 Mg/m³ respectively. The relation between the number of cyclic loading and axial strain exhibited an asymptotically increasing trend, converging toward a specific value for each experimental condition. Possible effect caused by elastic–plastic characteristics could be recognized, when axial strain for 0.5 Hz excitation becomes greater than the one of 1.0 Hz under same stress amplitude ratio. When the stress amplitude ratio took 0.1, the absolute value of axial strain of 0.5 Hz was greater than the one of 1.0 Hz, whereas its decreasing trend was recognized in the sequence of silt, clay and silty sand. The qualitative relations between pore water pressure and number of cyclic loading were also examined to scrutinize the effect of effective water pressure to the soil compactibility.     

Propagation of the state change induced by external forces in local interactions

This paper analyses the propagation of the state changes of agents that are induced byexternal forces applied to a plane. In addition, we propose two models for the behavior ofthe agents placed on a lattice plane, both of which are affected by local interactions. Wefirst assume that agents are allowed to move to another site to maximise theirsatisfaction. Second, we utilise a model in which the agents choose activities on eachsite. The results show that the migration (activity) patterns of agents in both modelsachieve stability without any external forces. However, when we apply an impulsiveexternal force to the state of the agents, we then observe the propagation of the changesin the agents’ states. Using simulation studies, we show the conditions for thepropagation of the state changes of the agents. We also show the propagation of the statechanges of the agents allocated in scale-free networks and discuss the estimation of theagents’ decisions in real state changes. Finally, we discuss the estimation of the agents’decisions in real state temporal changes using economic and social data from Japan and theUnited States.     

Analysis of repeated impacts on a steel rod with visco-plastic material behavior

In machine dynamics impacts are usually common phenomena, resulting from collisions of moving bodies. Even low velocity impacts might produce high stresses in the contact region, which result in inelastic deformation. Thereby, visco-plastic materials, such as steel, show a significant increase of the yield stress with the strain rate. In machine dynamics repeated collisions occur, resulting in repeated impacts on a previously deformed contact area. Then, inelastic deformation and the resulting residual stresses produced by previous impacts have an influence on the behavior of the following impacts. Thus, the impact behavior varies with the number of impacts. This paper presents a numerical and experimental evaluation of repeated impacts with identical impact velocity up to 3 m/s, whereby the deformation history of the contact area, due to previous impacts, is included. The approach is applied to longitudinal impacts of an elastic steel sphere on a steel rod with distinct visco-plastic material behavior which is identified by Split Hopkinson Pressure Bar tests. A Finite Element analysis and experimental verification using two Laser-Doppler-Vibrometers are performed. It is shown that for an accurate impact simulation the FE model must include the visco-plastic material behavior of the steel. Further it is found that the maximal contact force, the rebound velocity and the coefficient of restitution increase with the number of impacts, while the contact duration decreases with the number of impacts. After several impacts these quantities show saturation to a constant value, indicating no significant additional inelastic deformation in the later impacts. Further, the residual stress distribution, the maximal von Mises stress distribution and the local deformation at the contact point are evaluated and a characteristic force-deformation diagram is obtained. Finally, an analysis is performed to describe the relation between maximal force and remaining crater at the contact point.     

Analysis of the pure-rotational spectrum in the ν28 = 1 excited torsional state and torsional couplings of trans-ethyl methyl ether

The trans-ethyl methyl ether molecule has three low-lying torsional modes, that is, two inequivalent methyl internal rotations and an asymmetric skeletal torsion. The internal rotations of the CCH₃ and OCH₃ methyl rotors and the skeletal torsion correspond to the vibrational modes, ν₂₈, ν₂₉ and ν₃₀ respectively. In this study, the microwave absorption spectrum in the ν₂₈ = 1 CCH₃ torsional state was analyzed for the first time. Nine hundred fifty seven lines up to J = 48 and K = 4 were assigned, and the rotational, centrifugal distortion and internal rotational tunneling parameters were determined with the use of a tunneling matrix formalism. By combining the present results on the ν₂₈ = 1 torsional state with those for the ν₃₀ = 1 skeletal torsional state and the ν₂₉ = 1 OCH₃ torsional state, torsional couplings are estimated in order to understand quantitatively the inverted A/E sequence patterns observed for those three excited torsional states.     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.     

Analysis of cluster formations on planer cells based on genetic programming

This paper offers an analysis of cluster formations on planer cells comprised of multi-agents utilizing local interactions and state transitions based on Genetic Programming (GP) and its applications. First, we illustrate that if the states of agents are allowed to have continuous values, equilibrium is attained on the basis of the fixed-point theorem. We also show that if the agents are restricted to binary states, equilibrium is attained in an asymptotic sense. However, for agents characterized by more than one state, the attainment of equilibrium is not ensured. We examine our results by using a simulation wherein agents learn from past experiences based on GP. Finally, we demonstrate a system comprised of cluster formations on planer cells comprised of artificial agents, and apply this system to the clustering of employees in firms.     

Full automatic synthesis of [<Superscript>18</Superscript>F]THK-5351 for tau protein PET imaging in Alzheimer’s disease patients: 1 year experience

[¹⁸F]THK-5351, a new candidate for tau protein imaging, is based on an aryl quinoline structure. We report the full automatic synthesis using disposable cassettes under pH controlled [¹⁸F]fluorination. After the trapping of 88.5 ± 21.9 GBq of [¹⁸F]fluoride, it was eluted with potassium methansulfonate (KOMs) (pH 7.8)/K₂₂₂. After drying, 3 mg of the precursor was added to 1 mL DMSO and subjected to [¹⁸F]fluorination at 110 °C for 10 min. After hydrolysis, the final product was purified by HPLC. The overall radiochemical yield was 31.9 ± 11.1% (n = 22), satisfying all quality control criteria. It was stable for up to 6 h with high radiochemical purity as 99.8 ± 0.5%.     

The Microwave Spectrum of Methyl Formate (HCOOCH3) in the Frequency Range from 7 to 200 GHz

The rotational spectrum of methyl formate (HCOOCH₃) has been observed in the frequency range from 7 to 200 GHz. We newly assigned 1612 lines in the ground torsional state and simultaneously analyzed both A- and E-species data including previously reported lines on the basis of the internal axis method. A total of 3077 lines were fitted to a 1σ standard deviation of 139 kHz, and molecular parameters were determined.