Total Synthesis of (−)‐Isoschizogamine

The total synthesis of (?)‐isoschizogamine was accomplished, featuring the construction of the quaternary carbon center by the modified Johnson–Claisen rearrangement in basic media and the facile assembly of the key tetracyclic quinolone intermediate through a cascade cyclization. The characteristic cyclic aminal was constructed by late‐stage C?H functionalization at the position adjacent to the lactam nitrogen using a combination of CrO₃ and nBu₄NIO₄ and subsequent Bi(OTf)₃‐mediated cyclization.     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Gasification characteristics of woody biomass in the packed bed reactor

Gasification technology is recognized as one of the possibilities for utilizing biomass effectively. This study focused on woody biomass gasification fundamentals, using a bench-scale packed-bed reactor. In this experiment, pellets of black pine were gasified, using air as the oxidizing agent. Gasification tests were carried out under both updraft and downdraft conditions. Temperature distributions and compositions of syngas inside the gasifier were continuously monitored during gasification experiments at several ports on the wall of the reactor. The syngas at the exit of the gasifier was also sampled to estimate the amount of tar. Lower heating values of the syngas under updraft and downdraft conditions were 4.8 and 3.8 MJ/m³N, respectively. It was easier to control the height of the packed bed under the downdraft condition than under the updraft condition. Under the updraft condition, a bridging phenomenon occurred. Tar generation under the downdraft condition was lower than that under the updraft condition. This is because tar passes through a partial combustion zone or higher temperature zone in the downdraft gasifier.     

Analysis of repeated impacts on a steel rod with visco-plastic material behavior

In machine dynamics impacts are usually common phenomena, resulting from collisions of moving bodies. Even low velocity impacts might produce high stresses in the contact region, which result in inelastic deformation. Thereby, visco-plastic materials, such as steel, show a significant increase of the yield stress with the strain rate. In machine dynamics repeated collisions occur, resulting in repeated impacts on a previously deformed contact area. Then, inelastic deformation and the resulting residual stresses produced by previous impacts have an influence on the behavior of the following impacts. Thus, the impact behavior varies with the number of impacts. This paper presents a numerical and experimental evaluation of repeated impacts with identical impact velocity up to 3 m/s, whereby the deformation history of the contact area, due to previous impacts, is included. The approach is applied to longitudinal impacts of an elastic steel sphere on a steel rod with distinct visco-plastic material behavior which is identified by Split Hopkinson Pressure Bar tests. A Finite Element analysis and experimental verification using two Laser-Doppler-Vibrometers are performed. It is shown that for an accurate impact simulation the FE model must include the visco-plastic material behavior of the steel. Further it is found that the maximal contact force, the rebound velocity and the coefficient of restitution increase with the number of impacts, while the contact duration decreases with the number of impacts. After several impacts these quantities show saturation to a constant value, indicating no significant additional inelastic deformation in the later impacts. Further, the residual stress distribution, the maximal von Mises stress distribution and the local deformation at the contact point are evaluated and a characteristic force-deformation diagram is obtained. Finally, an analysis is performed to describe the relation between maximal force and remaining crater at the contact point.     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.