Aurophilic Interactions in the Self‐Assembly of Gold Nanoclusters into Nanoribbons with Enhanced Luminescence

Aurophilic interactions (Au^I???Au^I) are crucial in directing the supramolecular self‐assembly of many gold(I) compounds; however, this intriguing chemistry has been rarely explored for the self‐assembly of nanoscale building blocks. Herein, we report on studies on aurophilic interactions in the structure‐directed self‐assembly of ultrasmall gold nanoparticles or nanoclusters (NCs, <2 nm) using [Au₂₅(SR)₁₈]^? (SR=thiolate ligand) as a model cluster. The self‐assembly of NCs is initiated by surface‐motif reconstruction of [Au₂₅(SR)₁₈]^? from short SR‐[Au^I‐SR]₂ units to long SR‐[Au^I‐SR]_x (x>2) staples accompanied by structure modification of the intrinsic Au₁₃ kernel. Such motif reconstruction increases the content of Au^I species in the protecting shell of Au NCs, providing the structural basis for directed aurophilic interactions, which promote the self‐assembly of Au NCs into well‐defined nanoribbons in solution. More interestingly, the compact structure and effective aurophilic interactions in the nanoribbons significantly enhance the luminescence intensity of Au NCs with an absolute quantum yield of 6.2 % at room temperature.     

Nanoceria Supported Gold Catalysts for CO Oxidation

Two types of CeO₂ nanocubes (average size of 5 and 20 nm, respectively) prepared via the hydrothermal process were selected to load gold species via a deposition‐precipitation (DP) method. Various measurements, including X‐ray diffraction (XRD), Raman spectra, high resolution transmission electron microscopy (HRTEM), in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS), and temperature‐programmed reduction by hydrogen (H₂‐TPR), were applied to characterize the catalysts. It is found that the sample with ceria size of 20 nm (Au/CeO₂‐20) was covered by well dispersed both Au³⁺ and Au^δ+ (0 < δ < 1). For the other sample with ceria size of 5 nm (Au/CeO₂‐5), Au³⁺ is the dominant gold species. Au/CeO₂‐20 performed better catalytic activity for CO oxidation because of the strong CO adsorption of Au^δ+ in the catalysts. The catalytic activity of Au/CeO₂‐5 was improved due to the transformation of Au³⁺ to Au^δ+. Based on the CO oxidation and in situ DRIFTS results, Au^δ+ is likely to play a more important role in catalyzing CO oxidation reaction.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation-Induced Emission of Gold Nanoclusters

Aggregation-induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I-thiolate motifs on the AIE properties of Au NCs, by employing a series of water-soluble glutathione (GSH)-coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]⁻, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near-infrared II (NIR-II) region by controlling the length of the Au^I-SR motifs on the NC surface. Decreasing the length of Au^I-SR motifs also changes the origin of cluster luminescence from AIE-type phosphorescence to Au⁰-core-dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

Carbon Monoxide: A Mild and Efficient Reducing Agent towards Atomically Precise Gold Nanoclusters

In recent years, thiolate‐protected gold nanoclusters (or thiolated Au NCs) with a core size below 2 nm have emerged as a new class of multifunctional nanoparticles because of their unique molecular‐like properties and the potential to use these properties in many practical applications. A general synthesis of Au NCs may involve the use of a strong reducing agent (e.g., sodium borohydride (NaBH₄)), which often leads to the formation of mix‐sized Au NCs if no delicate control is applied. To obtain atomically precise Au NCs, additional physical or chemical selection processes (e.g., high‐resolution separation or size‐focusing) are required, which are difficult to be scaled up or are limited to only thermodynamically stable products. By introducing a milder reducing agent – carbon monoxide (CO) – both stable and metastable thiolated Au NCs, including Au_10–12, Au₁₅, Au₁₈, Au₂₅, and Au₂₉, can be synthesized in a one‐pot manner. In addition, CO reduction also enables the synthesis of a highly luminescent Au₂₂(SG)₁₈ NC. Furthermore, the intermediates of Au NC growth can be tracked in the CO‐reduction system due to the mild and readily stoppable nature of CO reduction. Therefore, the use of CO reduction may bring new flexibilities in designing synthetic strategies and understanding the growth mechanism of atomically precise Au NCs, which could contribute to a better design of functional Au NCs, further paving their way towards practical applications in various fields.     

Exposing the Delocalized Cu−S π Bonds on the Au24Cu6(SPhtBu)22 Nanocluster and Its Application in Ring‐Opening Reactions

Bimetallic nanomaterials are of major importance in catalysis. A Au‐Cu bimetallic nanocluster was synthesized that is effective in catalyzing the epoxide ring‐opening reaction. The catalyst was analyzed by SCXRD and ESI‐MS and found to be Au₂₄Cu₆(SPhtBu)₂₂ (Au₂₄Cu₆ for short). Six copper atoms exclusively occupy the surface positions in two groups with three atoms for each, and each group was bonded with three thiolate ligands to give a planar motif reminiscent of a benzene ring. In the epoxide‐ring opening reaction, Au₂₄Cu₆ exhibited superior catalytic activity compared to other homometallic and Au‐Cu alloy NCs, such as Au₂₅ and Au_38?xCu_x. Control experiments and DFT calculations revealed that the π conjugation among the Cu?S bonds played a pivotal role. This study demonstrates a unique π conjugation established among the Cu?S bonds as a critical structural motif in the nanocluster, which facilitates the catalysis of a ring‐opening reaction.     

Balancing the Rate of Cluster Growth and Etching for Gram‐Scale Synthesis of Thiolate‐Protected Au25 Nanoclusters with Atomic Precision

We report a NaOH‐mediated NaBH₄ reduction method for the synthesis of mono‐, bi‐, and tri‐thiolate‐protected Au₂₅ nanoclusters (NCs) with precise control of both the Au core and thiolate ligand surface. The key strategy is to use NaOH to tune the formation kinetics of Au NCs, i.e., reduce the reduction ability of NaBH₄ and accelerate the etching ability of free thiolate ligands, leading to a well‐balanced reversible reaction for rapid formation of thermodynamically favorable Au₂₅ NCs. This protocol is facile, rapid (≤3 h), versatile (applicable for various thiolate ligands), and highly scalable (>1 g Au NCs). In addition, bi‐ and tri‐thiolate‐protected Au₂₅ NCs with adjustable ratios of hetero‐thiolate ligands were easily obtained. Such ligand precision in molecular ratios, spatial distribution and uniformity resulted in richly diverse surface landscapes on the Au NCs consisting of multiple functional groups such as carboxyl, amine, and hydroxy. Analysis based on NMR spectroscopy revealed that the hetero‐ligands on the NCs are well distributed with no ligand segregation. The unprecedented synthesis of multi‐thiolate‐protected Au₂₅ NCs may further promote the practical applications of functional metal NCs.     

Size‐Dependence of the Activity of Gold Nanoparticle‐Loaded Titanium(IV) Oxide Plasmonic Photocatalyst for Water Oxidation

Mesoporous TiO₂ nanocrystalline film was formed on fluorine‐doped tin oxide electrode (TiO₂/FTO) and gold nanoparticles (NPs) of different sizes were loaded onto the surface with the loading amount kept constant (Au/TiO₂/FTO). Visible‐light irradiation (λ>430 nm) of the Au/TiO₂/FTO photoanode in a photoelectrochemical cell with the structure of photoanode|0.1 m NaClO4 aqueous solution|Ag/AgCl (reference electrode)|glassy carbon (cathode) leads to the oxidation of water to oxygen (O₂). We show that the visible‐light activity of the Au/TiO₂/FTO anode increases with a decrease in Au particle size (d) at 2.9≤d≤11.9 nm due to the enhancement of the charge separation and increasing photoelectrocatalytic activity.     

Cytochrome c‐Capped Fluorescent Gold Nanoclusters: Imaging of Live Cells and Delivery of Cytochrome c

Cytochrome c‐capped fluorescent gold nanoclusters (Au‐NCs) are used for imaging of live lung and breast cells. Delivery of cytochrome c inside the cells is confirmed by covalently attaching a fluorophore (Alexa Fluor 594) to cytochrome c‐capped Au‐NCs and observing fluorescence from Alexa 594 inside the cell. Mass spectrometry studies suggest that in bulk water, addition of glutathione (GSH) to cytochrome c‐capped Au‐NCs results in the formation of glutathione‐capped Au‐NCs and free apo‐cytochrome c. Thus glutathione displaces cytochrome c as a capping agent. Using confocal microscopy, the emission spectra and decay of Au‐NCs are measured in live cells. From the position of the emission maximum it is shown that the Au‐NCs exist as Au₈ in bulk water and as Au₁₃ inside the cells. Fluorescence resonance energy transfer from cytochrome c–Au‐NC (donor) to Mitotracker Orange (acceptor) indicates that the Au‐NCs localise in the mitochondria of live cells.     

Near Infrared Light-to-Heat Conversion for Liquid-Phase Oxidation Reactions by Antimony-Doped Tin Oxide Nanocrystals

Effective utilization of the sunlight for chemical reactions is pivotal for dealing with the growing energy and environmental issues. So far, much effort has been focused on the development of semiconductor photocatalysts responsive to UV and visible light. However, the near infrared and infrared (NIR-IR) light occupying ∼50 % of the solar energy has usually been wasted because of the low photon energy insufficient for the band gap excitation. Antimony doping into SnO₂ (ATO) induces strong absorption due to the conduction band electrons in the NIR region. The absorbed light energy is eventually converted to heat via the interaction between hot electrons and phonons. This Concept highlights the photothermal effect of ATO nanocrystals (NCs) on liquid-phase oxidation reactions through the NIR light-to-heat conversion. Under NIR illumination even at an intensity of ∼0.5 sun, the reaction field temperature on the catalyst surface is raised 20–30 K above the bulk solution temperature, while the latter is maintained near the ambient temperature. In some reactions, this photothermal local heating engenders the enhancement of not only the catalytic activity and selectivity but also the regeneration of catalytically active sites. Further, the photocatalytic activity of semiconductors can be promoted. Finally, the conclusions and possible subjects in the future are summarized.     

Ptshell–Aucore/C electrocatalyst with a controlled shell thickness and improved Pt utilization for fuel cell reactions

Nanoscale Pt_shell–Au_core/C with a controlled shell thickness was successfully synthesized based on a successive reduction strategy. With a Au core size of 4.8 nm, a complete Pt shell of thickness ∼0.6 nm was formed at Pt/Au mole ratio 1:1. The complete coverage of Au core with Pt shell was suggested by various techniques including TEM, UV–vis and cyclic voltammetry. A higher specific activity compared to conventional Pt/C was demonstrated using the probe reaction of methanol electro-oxidation, proving the improved Pt utilization with this core-shell structure.     

High‐Level Incorporation of Silver in Gold Nanoclusters: Fluorescence Redshift upon Interaction with Hydrogen Peroxide and Fluorescence Enhancement with Herbicide

High‐level incorporation of Ag in Au nanoclusters (NCs) is conveniently achieved by controlling the concentration of Ag⁺ in the synthesis of bovine serum albumin (BSA)‐protected Au NCs, and the resulting structure is determined to be bimetallic Ag₂₈Au₁₀‐BSA NCs through a series of characterizations including energy‐dispersive X‐ray spectroscopy, mass spectroscopy, and X‐ray photoelectron spectroscopy, together with density functional theory simulations. Interestingly, the Ag₂₈Au₁₀ NCs exhibit a significant fluorescence redshift rather than quenching upon interaction with hydrogen peroxide, providing a new approach to the detection of hydrogen peroxide through direct comparison of their fluorescence peaks. Furthermore, the Ag₂₈Au₁₀ NCs are also used for the sensitive and selective detection of herbicide through fluorescence enhancement. The detection limit for herbicide (0.1 nm ) is far below the health value established by the U.S. Environmental Protection Agency; such sensitive detection was not achieved by using AuAg NCs with low‐level incorporation of Ag or by using the individual metal NCs.     

Small Gold(I) and Gold(I)–Silver(I) Clusters by C−Si Auration

Auration of o-trimethylsilyl arylphosphines leads to the formation of gold and gold–silver clusters with ortho-metalated phosphines displaying 3c–2e Au−C−M bonds (M=Au/Ag). Hexagold clusters [Au₆L₄](X)₂ are obtained by reaction of (L−TMS)AuCl with AgX, whereas reaction with AgX and Ag₂O leads to gold–silver clusters [Au₄Ag₂L₄](X)₂. Oxo-trigold(I) species [Au₃O]⁺ were identified as the intermediates in the formation of the silver-doped clusters. Other [Au₅], [Au₄Ag], and [Au₁₂Ag₄] clusters were also obtained. Clusters containing PAu−Au−AuP structural motif display good catalytic activity in the activation of alkynes under homogeneous conditions.     

Atomically precise Au25(GSH)18 nanoclusters versus plasmonic Au nanocrystals: Evaluating charge impetus in solar water oxidation

Atomically precise metal nanoclusters (NCs) have been deemed as an emerging class of metal nanomaterials owing to fascinating size-dependent physicochemical properties, discrete energy band structure, and quantum confinement effect, which are distinct from conventional metal nanoparticles (NPs). Nevertheless, metal NCs suffer from photoinduced self-oxidative aggregation accompanied by in-situ transformation to metal NPs, markedly reducing the photosensitization of metal NCs. Herein, maneuvering the generic instability of metal NCs, we perform the charge transport impetus comparison between atomically precise metal NCs and plasmonic metal NPs counterpart obtained from in-situ self-transformation of metal NCs in photoelectrochemical (PEC) water splitting reaction. For conceptual demonstration, we proposed two quintessential heterostructures, which include TNTAs-Au₂₅ heterostructure fabricated by electrostatically depositing glutathione (GSH)-protected Au₂₅(GSH)₁₈ NCs on the TiO₂ nanotube arrays (TNTAs) substrate, and TNTAs-Au heterostructure constructed by triggering self-transformation of Au₂₅(GSH)₁₈ NCs to plasmonic Au NPs in TNTAs-Au₂₅ via calcination. The results indicate that photoelectrons produced over Au₂₅ NCs are superior to hot electrons of plasmonic Au NPs in stimulating the interracial charge transport toward solar water oxidation. This is mainly ascribed to the significantly accelerated carrier transport kinetics, prolonged carrier lifespan, and substantial photosensitization effect of Au₂₅ NCs compared with plasmonic Au NPs, resulting in the considerably enhanced PEC water splitting performance of TNTAs-Au₂₅ relative to plasmonic TNTAs-Au counterpart under visible light irradiation. Our work would provide important implications for rationally designing atomically precise metal NCs-based photosystems toward solar energy conversion.     

Ligand‐Stabilized and Atomically Precise Gold Nanocluster Catalysis: A Case Study for Correlating Fundamental Electronic Properties with Catalysis

We present results from our investigations into correlating the styrene‐oxidation catalysis of atomically precise mixed‐ligand biicosahedral‐structure [Au₂₅(PPh₃)₁₀(SC₁₂H₂₅)₅Cl₂]²⁺ (Au₂₅‐bi) and thiol‐stabilized icosahedral core–shell‐structure [Au₂₅(SCH₂CH₂Ph)₁₈]^? (Au₂₅‐i) clusters with their electronic and atomic structure by using a combination of synchrotron radiation‐based X‐ray absorption fine‐structure spectroscopy (XAFS) and ultraviolet photoemission spectroscopy (UPS). Compared to bulk Au, XAFS revealed low Au–Au coordination, Au? Au bond contraction and higher d‐band vacancies in both the ligand‐stabilized Au clusters. The ligands were found not only to act as colloidal stabilizers, but also as d‐band electron acceptor for Au atoms. Au₂₅‐bi clusters have a higher first‐shell Au coordination number than Au₂₅‐i, whereas Au₂₅‐bi and Au₂₅‐i clusters have the same number of Au atoms. The UPS revealed a trend of narrower d‐band width, with apparent d‐band spin–orbit splitting and higher binding energy of d‐band center position for Au₂₅‐bi and Au₂₅‐i. We propose that the differences in their d‐band unoccupied state population are likely to be responsible for differences in their catalytic activity and selectivity. The findings reported herein help to understand the catalysis of atomically precise ligand‐stabilized metal clusters by correlating their atomic or electronic properties with catalytic activity.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

聚合物稳定的金纳米簇催化：理论计算与实验的相互影响

平均粒径为2–10 nm的聚合物稳定的Au纳米簇(NCs)表现出独特的催化性能。多个研究表明，影响聚合物稳定的Au NCs催化活性的主要因素为： Au NC尺寸的控制、聚合物的选择以及反应条件的优化。这是由于聚合物稳定的Au NCs在多个催化反应中表现出明显的尺寸效应，其催化活性也因所采用的聚合物和反应条件的不同而不同。为了阐明影响聚合物稳定的Au NCs催化活性的内在原因，众多研究者关注于聚合物稳定的Au NCs催化中的理论计算与实验的相互影响。本文主要总结了聚合物稳定的Au NCs中这种相互影响的研究进展。     

Size-specific catalytic activity of polymer-stabilized gold nanoclusters for aerobic alcohol oxidation in water

Gold nanoclusters (phi = 1.3 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NCs) readily oxidize benzylic alcohols to the corresponding aldehydes and/or carboxylic acids under ambient temperature in water. Kinetic measurement revealed that smaller Au:PVP NCs exhibit higher catalytic activity than larger (9.5 nm) homologues and, more surprisingly, than Pd:PVP NCs of comparable size (1.5 and 2.2 nm). On the basis of the marked difference in the kinetic isotope effect and activation energy between Au:PVP and Pd:PVP NCs, a reaction mechanism for alcohol oxidation catalyzed by Au:PVP NCs is proposed in which a superoxo-like molecular oxygen species adsorbed on the surface of the small Au NCs abstracts a hydrogen atom from the alkoxide.     

Atomically Tailored Gold Nanoclusters for Catalytic Application

Recent advances in the synthetic chemistry of atomically precise metal nanoclusters (NCs) have significantly broadened the accessible sizes and structures. Such particles are well defined and have intriguing properties, thus, they are attractive for catalysis. Especially, those NCs with identical size but different core (or surface) structure provide unique opportunities that allow the specific role of the core and the surface to be mapped out without complication by the size effect. Herein, we summarize recent work with isomeric Au_n NCs protected by ligands and isostructural NCs but with different surface ligands. The highlighted work includes catalysis by spherical and rod‐shaped Au₂₅ (with different ligands), quasi‐isomeric Au₂₈(SR)₂₀ with different R groups, structural isomers of Au₃₈(SR)₂₄ (with identical R) and Au₃₈S₂(SR)₂₀ with body‐centred cubic (bcc) structure, and isostructural [Au₃₈L₂₀(PPh₃)₄]²⁺ (different L). These isomeric and/or isostructural NCs have provided valuable insights into the respective roles of the kernel, surface staples, and the type of ligands on catalysis. Future studies will lead to fundamental advances and development of tailor‐made catalysts.