Acceptorless Photocatalytic Dehydrogenation of Furfuryl Alcohol (FOL) to Furfural (FAL) and Furoic Acid (FA) over Ti3C2Tx/CdS under Visible Light

Acceptorless photocatalytic dehydrogenation is not only a promising alternative to photocatalytic water splitting for hydrogen generation but also provides a green and sustainable strategy for the synthesis of value-added organic compounds. In this work, Ti₃C₂T_x/CdS nanocomposites were obtained by self-assembly of hexagonal CdS in the presence of preformed Ti₃C₂T_x nanosheets, which serves as a photocatalyst for acceptorless dehydrogenation of biomass-derived furfuryl alcohol (FOL) to furfural (FAL) and furoic acid (FA) in neutral and alkaline medium respectively, with simultaneous generation of stoichiometric hydrogen under visible light. Ti₃C₂T_x MXene acts as an efficient cocatalyst for the photocatalytic dehydrogenation of FOL over CdS, with an optimum performance achieved over 0.50 wt% Ti₃C₂T_x/CdS nanocomposite. This study provides an economic and sustainable strategy for the simultaneous valorization of biomass-derived FOL to produce FAL and FA as well as the production of clean energy hydrogen under mild condition based on noble metal-free semiconductor-based photocatalysts.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Chlorophyll-Based Organic Heterojunction on Ti3C2Tx MXene Nanosheets for Efficient Hydrogen Production

The Z-scheme process is a photoinduced electron-transfer pathway in natural oxygenic photosynthesis involving electron transport from photosystem II (PSII) to photosystem I (PSI). Inspired by the interesting Z-scheme process, herein a photocatalytic hydrogen evolution reaction (HER) employing chlorophyll (Chl) derivatives, Chl-1 and Chl-2, on the surface of Ti₃C₂T_x MXene with two-dimensional accordion-like morphology, forming Chl-1@Chl-2@Ti₃C₂T_x composite, is demonstrated. Due to the frontier molecular orbital energy alignments of Chl-1 and Chl-2, sublayer Chl-1 is a simulation of PSI, whereas upper layer Chl-2 is equivalent to PSII, and the resultant electron transport can take place from Chl-2 to Chl-1. Under the illumination of visible light (>420 nm), the HER performance of Chl-1@Chl-2@Ti₃C₂T_x photocatalyst was found to be as high as 143 μmol h⁻¹ g_cat⁻¹, which was substantially higher than that of photocatalysts of either Chl-1@Ti₃C₂T_x (20 μmol h⁻¹ g⁻¹) or Chl-2@Ti₃C₂T_x (15 μmol h⁻¹ g⁻¹).     

CoxP/Hollow Porous C3N4 as Highly Efficient Schottky Contact Photocatalyst for H2 Evolution from Water Splitting

Photocatalytic water splitting to obtain hydrogen energy can transform low-density solar to high density, new and clean energy in a clean way, which is one of the ideal ways to solve the energy crisis and environmental pollution. In this paper, The Co_xP/hollow porous C₃N₄ composite photocatalytic material was synthesized by simple methods. The photocatalytic hydrogen production rate of Co_xP/hollow porous C₃N₄ reaches 1602 μmol g⁻¹ h⁻¹, which is 151 times of that of pure C₃N₄. The reasons for the high photocatalytic H₂ evolution activity of Co_xP/hollow porous C₃N₄ could be summarized as follows: (1) the hollow and porous structure of C₃N₄ shows higher light capture efficiency, larger specific surface area and more surface active sites. (2) metalloid Co_xP loaded forms the Schottky contact with C₃N₄, which improves the photogenerated charges separation efficiency of C₃N₄, prolongs the photogenerated charges lifetime and improves the photocatalytic H₂ evolution activity of C₃N₄. (3) The higher conductivity of metalloid Co_xP and the lower overpotential of hydrogen production are other reasons for the higher activity of photocatalytic hydrogen production of Co_xP/hollow porous C₃N₄. This work provides an important role for the design of efficient, stable, and efficient construction of photocatalysts for solar energy conversion.     

Highly efficient photocatalytic reduction of nitrogen into ammonia by single Ru atom catalyst supported by BeO monolayer

Ammonia（NH₃） is one of the most important building blocks of the chemical industry and a promising sustainable energy carrier. Conventional production of NH₃ via the Haber-Bosch process requires high temperature and high pressure, which is energy demanding and suffers safety issues. Photocatalytic nitrogen reduction reaction（NRR） is a green and sustainable route for NH₃ production, and has been expected to be an alternative for NH₃ production under mil...     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Ternary chalcogenides XGaS2 (X = Ag or Cu) for photocatalytic hydrogen generation from water splitting under irradiation of visible light

Ternary chalcogenide silver gallium sulfide (AgGaS₂), which has an orthorhombic structure, was already synthesized. However, the feasibility of using the crystal for hydrogen production through photocatalytic water splitting has not been explored. Here, we systematically investigated the structural, electronic, optical, and transport properties of XGaS₂ (X = Ag or Cu) with orthorhombic structure by using the first principles calculations. The band alignments indicate that all calculated absolute potentials of the valence and conduction band edges met the requirement of photocatalytic water splitting reaction. The presence of 2.64 and 2.56 eV direct band energy gaps and obvious optical absorption within the visible light range imply that XGaS₂ can correspond to solar light. Moreover, the large electron mobility and the obvious differences between electron mobility and hole mobility were identified in XGaS₂ structures, which is beneficial to the photocatalytic performance of the water splitting reaction. The present findings can provide a helpful reference for developing novel photocatalytic materials with XGaS₂ for hydrogen generation from water splitting under irradiation of visible light.     

Overall Water Splitting on the Transition‐Metal Oxynitride Photocatalyst LaMg1/3Ta2/3O2N over a Large Portion of the Visible‐Light Spectrum

One of the main targets of studies on water splitting photocatalysts is to develop semiconductor materials with narrower bandgaps capable of overall water splitting for efficient harvesting of solar energy. A series of transition‐metal oxynitrides, LaMg_xTa_1?xO_1+3xN_2?3x (x≥1/3), with a complex perovskite structure was reported as the first example of overall water splitting operable at up to 600 nm. The photocatalytic behavior of LaMg_1/3Ta_2/3O₂N was investigated in detail in order to optimize photocatalyst preparation and water‐splitting activity. Various attempts exploring photocatalyst preparation steps, that is, cocatalyst selection, coating material and method, and synthesis method for the oxide precursor, revealed photocatalyst structures necessary for achieving overall water splitting. Careful examination of photocatalyst preparation procedures likely enhanced the quality of the produced photocatalyst, leading to a more homogeneous coating quality and semiconductor particles with fewer defects. Thus, the photocatalytic activity for water splitting on LaMg_1/3Ta_2/3O₂N was largely enhanced.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

Enhanced Photocatalytic Hydrogen‐Production Performance of Graphene–ZnxCd1−xS Composites by Using an Organic S Source

In response to the increasing concerns over energy and environmental sustainability, photocatalytic water‐splitting technology has attracted broad attention for its application in directly converting solar energy to valuable hydrogen (H₂) energy. In this study, high‐efficiency visible‐light‐driven photocatalytic H₂ production without the assistance of precious‐metal cocatalysts was achieved on graphene–Zn_xCd_1?xS composites with controlled compositions. The graphene‐Zn_xCd_1?xS composites were for the first time fabricated by a one‐step hydrothermal method with thiourea as an organic S source. It was found that thiourea facilitates heterogeneous nucleation of Zn_xCd_1?xS and in situ growth of Zn_xCd_1?xS nanoparticles on graphene nanosheets. Such a scenario results in abundant and intimate interfacial contact between graphene and Zn_xCd_1?xS nanoparticles, efficient transfer of the photogenerated charge carriers, and enhanced photocatalytic activity for H₂ production. The highest H₂‐production rate of 1.06 mmol h^?1 g^?1 was achieved on a graphene–Zn_0.5Cd_0.5S composite photocatalyst with a graphene content of 0.5 wt %, and the apparent quantum efficiency was 19.8 % at 420 nm. In comparison, the graphene–Zn_xCd_1?xS composite photocatalyst prepared by using an inorganic S source such as Na₂S exhibited much lower activity for photocatalytic H₂ production. In this case, homogeneous nucleation of Zn_xCd_1?xS becomes predominant and results in insufficient and loose contact with the graphene backbone through weak van der Waals forces and a large particle size. This study highlights the significance of the choice of S source in the design and fabrication of advanced graphene‐based sulfide photocatalytic materials with enhanced activity for photocatalytic H₂ production.     

Tuning Binding Strength of Multiple Intermediates towards Efficient pH-universal Electrocatalytic Hydrogen Evolution by Mo8O26-NbNxOy Heterocatalysts

Developing efficient and robust hydrogen evolution reaction (HER) catalysts for scalable and sustainable hydrogen production through electrochemical water splitting is strategic and challenging. Herein, heterogeneous Mo₈O₂₆-NbN_xO_y supported on N-doped graphene (defined as Mo₈O₂₆-NbN_xO_y/NG) is synthesized by controllable hydrothermal reaction and nitridation process. The O-exposed Mo₈O₂₆ clusters covalently confined on NbN_xO_y nanodomains provide a distinctive interface configuration and appropriate electronic structure, where fully exposed multiple active sites give excellent HER performance beyond commercial Pt/C catalyst in pH-universal electrolytes. Theoretical studies reveal that the Mo₈O₂₆-NbN_xO_y interface with electronic reconstruction affords near-optimal hydrogen adsorption energy and enhanced initial H₂O adsorption. Furthermore, the terminal O atoms in Mo₈O₂₆ clusters cooperate with Nb atoms to promote the initial H₂O adsorption, and subsequently reduce the H₂O dissociation energy, accelerating the entire HER kinetics.     

Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible-Light Photocatalytic Water Splitting

The strong band-to-band absorption of photocatalysts spanning the whole visible-light region (400–700 nm) is critically important for solar-driven photocatalysis. Although it has been actively and widely used as a photocatalyst for various reactions in the past four decades, TiO₂ has a very poor ability to capture the whole spectrum of visible light. In this work, by controlling the spatially homogeneous distribution of boron and nitrogen heteroatoms in anatase TiO₂ microspheres with a predominance of high-energy {001} facets, a strong visible-light absorption spectrum with a sharp edge beyond 680 nm has been achieved. The red TiO₂ obtained with homogeneous doping of boron and nitrogen shows no increase in defects like Ti³⁺ that are commonly observed in doped TiO₂. More importantly, it has the ability to induce photocatalytic water oxidation to produce oxygen under the irradiation of visible light beyond 550 nm and also the photocatalytic reduction of water to produce hydrogen under visible light. These results demonstrate the great promise of using red TiO₂ for visible-light photocatalytic water splitting and also reveal an attractive strategy for realizing the wide-spectrum visible-light absorption of wide-band-gap oxide photocatalysts.     

Regulating Fast Anionic Redox for High‐Voltage Aqueous Hydrogen‐Ion‐based Energy Storage

The ionic conductivity and small size of the hydrogen ion make it an ideal charge carrier for hydrogen‐ion energy storage (HES); however, high‐voltage two‐electrode configurations are difficult to construct as the result of the lack of efficient cathodic energy storage. Herein, the high potential fast anionic redox at the cathode of reduced graphene oxide (rGO) was applied by introducing redox additive electrolytes. By coupling the storing hydrogen ion in the Ti₃C₂T_x at the anode, a HES with a voltage of 1.8 V and a plateau voltage at 1.2 V was constructed. Compared with 2.2 Wh kg^?1 for the low‐voltage Ti₃C₂T_x//Ti₃C₂T_x, the specific energy of asymmetric rGO//Ti₃C₂T_x reaches 34.4 Wh kg^?1. Furthermore, it possesses an energy density of 23.7 Wh kg^?1 at high power density of 22.5 kW kg^?1. Thus, this study provides a novel guideline for constructing high‐voltage fast HES full cells.     

Ternary BiOBr/TiO2/Ti3C2Tx MXene nanocomposites with heterojunction structure and improved photocatalysis performance

The rational design and construction of heterojunction structure is an effective strategy to improve the photocatalytic performance. Herein, a series of BiOBr nanosheets-immobilized TiO₂/Ti₃C₂T_x MXene hybrid materials with heterojunction structure were synthesized by a facial one-step hydrothermal method. The ternary composites show outstanding performance as photocatalysts for the degradation of rhodamine B due to the optimized synergetic effects of BiOBr, TiO₂ and Ti₃C₂T_x. The improved photocatalytic performance is remarkably attributed to the construction of a heterojunction between TiO₂ and BiOBr due to their well-matching of energy band position, which can enhance the absorption for visible light and promote the transfer of photo-generated charge carriers. Moreover, Ti₃C₂T_x acts as an electron trap to further accelerate the separation of photo-generated electrons and holes.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

Surface Coating of Amorphous TiOx Enables Efficient Vapor-fed Photocatalytic Overall Water Splitting with Substantial Apparent Quantum Yield

Photocatalytic overall water splitting represents a promising strategy for sustainable hydrogen production. However, photocorrosion and dissolution of photocatalysts and cocatalysts are common concern for the solid-liquid phase reaction. Recently, the above issues could be addressed by Domen and coworkers, when the photocatalytic water splitting was conducted in the presence of water vapor, which dramatically restrain the undesired corrosion of the photocatalysts and cocatalysts. Besides, surface decoration of hygroscopic TiO_x layer promotes adsorption of water molecules and prevents the corrosion process. In addition, vapor-fed photocatalytic water splitting remains considerable apparent quantum yield compared with the liquid water photocatalytic overall water splitting at pressurized condition, which endows great potential in practical application.     

A Complex Perovskite‐Type Oxynitride: The First Photocatalyst for Water Splitting Operable at up to 600 nm

One of the simplest methods for splitting water into H₂ and O₂ with solar energy entails the use of a particulate‐type semiconductor photocatalyst. To harness solar energy efficiently, a new water‐splitting photocatalyst that is active over a wider range of the visible spectrum has been developed. In particular, a complex perovskite‐type oxynitride, LaMg_xTa_1?xO_1+3xN_2?3x (x≥1/3), can be employed for overall water splitting at wavelengths of up to 600 nm. Two effective strategies for overall water splitting were developed. The first entails the compositional fine‐tuning of a photocatalyst to adjust the bandgap energy and position by forming a series of LaMg_xTa_1?xO_1+3xN_2?3x solid solutions. The second method is based on the surface coating of the photocatalyst with a layer of amorphous oxyhydroxide to control the surface redox reactions. By combining these two strategies, the degradation of the photocatalyst and the reverse reaction could be prevented, resulting in successful overall water splitting.     

A Multiple Structure‐Design Strategy towards Ultrathin Niobate Perovskite Nanosheets with Thickness‐Dependent Photocatalytic Hydrogen‐Evolution Performance

Hydrogen production by catalytic water splitting using sunlight holds great promise for clean and sustainable energy source. Despite the efforts made in the past decades, challenges still exist in pursuing solid catalysts with light‐harvesting capacity, large surface areas and efficient utilities of the photogenerated carrier, at the same time. Here, a multiple structure design strategy leading to highly enhanced photocatalytic performance on hydrogen production from water splitting in Dion–Jacobson perovskites KCa₂Na_{n ‐3}Nb_n O_{3n +1} is described. Specifically, chemical doping (N/Nb⁴⁺) of the parent oxides via ammoniation improved the ability of sunlight harvesting efficiently; subsequent liquid exfoliation of the doped perovskites yielded ultrathin [Ca₂Na_{n ‐3}Nb_n O_{3n +1}]⁻ nanosheets with greatly increased surface areas. Significantly, the maximum hydrogen evolution appears in the n =4 nanosheets, which suggests the most favorable thickness for charge separation in such perovskite‐type catalysts. The optimized black N/Nb⁴⁺‐[Ca₂NaNb₄O₁₃]⁻ nanosheets show greatly enhanced photocatalytic performance, as high as 973 μmol h⁻¹ with Pt loading, on hydrogen evolution from water splitting. As a proof‐of‐concept, this work highlights the feasibility of combining various chemical strategies towards better catalysts and precise thickness control of two‐dimensional materials.