Synthesis and Biological Evaluation of Several Dephosphonated Analogues of CMP‐Neu5Ac as Inhibitors of GM3‐Synthase

Previous studies demonstrated that reducing the GM3 content in myoblasts increased the cell resistance to hypoxic stress, suggesting that a pharmacological inhibition of the GM3 synthesis could be instrumental for the development of new treatments for ischemic diseases. Herein, the synthesis of several dephosphonated CMP‐Neu5Ac congeners and their anti ‐ GM3‐synthase activity is reported. Biological activity testes revealed that some inhibitors almost completely blocked the GM3‐synthase activity in vitro and reduced the GM3 content in living embryonic kidney 293A cells, eventually activating the epidermal growth factor receptor (EGFR) signaling cascade.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Time-Evolving Measures and Macroscopic Modeling of Pedestrian Flow

This paper introduces a new model of pedestrian flow, formulated within a measure-theoretic framework. It consists of a macroscopic representation of the system via a family of measures which, pushed forward by some flow maps, provide an estimate of the space occupancy by pedestrians at successive times. From the modeling point of view, this setting is particularly suitable for treating nonlocal interactions among pedestrians, obstacles, and wall boundary conditions. In addition, the analysis and numerical approximation of the resulting mathematical structures, which are the principal objectives of this work, follow more easily than for models based on standard hyperbolic conservation laws.     

Optimal vaccine scheduling in cancer immunotherapy

Cancer immunotherapy aims at stimulating the immune system to react against cancer stealth capabilities. It consists of repeatedly injecting small doses of a tumor-associated molecule one wants the immune system to recognize, until a consistent immune response directed against the tumor cells is observed.

We have applied the theory of optimal control to the problem of finding the optimal schedule of injections of an immunotherapeutic agent against cancer. The method employed works for a general ODE system and can be applied to find the optimal protocol in a variety of clinical problems where the kinetics of the drug or treatment and its influence on the normal physiologic functions have been described by a mathematical model.

We show that the choice of the cost function has dramatic effects on the kind of solution the optimization algorithm is able to find. This provides evidence that a careful ODE model and optimization schema must be designed by mathematicians and clinicians using their proper different perspectives.     

Sigma-borane complexes of iridium: synthesis and structural characterization

Reaction of NaBH4 with (tBuPOCOP)IrHCl affords the previously reported complex (tBuPOCOP)IrH2(BH3) (1) (tBuPOCOP = kappa(3)-C6H3-1,3-[OP(tBu)2]2). The structure of 1 determined from neutron diffraction data contains a B-H sigma-bond to iridium with an elongated B-H bond distance of 1.45(5) A. Compound 1 crystallizes in the space group P1 (Z = 2) with a = 8.262 (5) A, b = 12.264 (5) A, c = 13.394 (4) A, and V = 1256.2 (1) A(3) (30 K). Complex 1 can also be prepared by reaction of BH3 x THF with (tBuPOCOP)IrH2. Reaction of (tBuPOCOP)IrH2 with pinacol borane gave initially complex 2, which is assigned a structure analogous to that of 1 based on spectroscopic measurements. Complex 2 evolves H2 at room temperature leading to the borane complex 3, which is formed cleanly when 2 is subjected to dynamic vacuum. The structure of 3 has been determined by X-ray diffraction and consists of the (tBuPOCOP)Ir core with a sigma-bound pinacol borane ligand in an approximately square planar complex. Compound 3 crystallizes in the space group C2/c (Z = 4) with a = 41.2238 (2) A, b = 11.1233 (2) A, c = 14.6122 (3) A, and V = 6700.21 (19) A(3) (130 K). Reaction of (tBuPOCOP)IrH2 with 9-borobicyclononane (9-BBN) affords complex 4. Complex 4 displays (1)H NMR resonances analogous to 1 and exists in equilibrium with (tBuPOCOP)IrH2 in THF solutions.     

Synthesis, structure, and properties of Cs(4)Th(4)P(4)Se(26): a quaternary thorium selenophosphate containing the (P(2)Se(9))(6-) anion

Orange crystals of Cs(4)Th(4)P(4)Se(26) were grown from the reaction of (232)Th and P in a Cs(2)Se(3)/Se molten salt flux at 750 degrees C. Cs(4)Th(4)P(4)Se(26) crystallizes in the orthorhombic space group Pbca with the unit cell parameters: a = 12.0130(6), b = 14.5747(7), c = 27.134(1) A; Z = 8. The compound exhibits a three-dimensional structure, consisting of dimeric [Th(2)Se(13)] polyhedral units. The two crystallographically independent, nine-coordinate, bicapped trigonal prismatic thorium atoms share a triangular face to form the dimer, and each dimer edge-shares two selenium atoms with two other dimers to form kinked chains along the [010] direction. While this structure shares features of the previously reported Rb(4)U(4)P(4)Se(26), including phosphorus in the 5+ oxidation state, careful inspection of the structure reveals that the selenophosphate anion that knits the structure together in three directions in both compounds is a unique (P(2)Se(9))(6-) anion. The formula may be described best as [Cs(2)Th(2)(P(2)Se(9))(Se(2))(2)](2). The (P(2)Se(9))(6-) anion features a nearly linear Se-Se-Se backbone with an angle of 171 degrees and Se-Se distances that are approximately 0.2-0.3 A longer than the typical single Se-Se bond. Magnetic studies confirm that this phase contains Th(IV). Raman data for this compound is reported, and structural comparisons will be drawn to its uranium analogue, Rb(4)U(4)P(4)Se(26).     

Variable temperature neutron diffraction and X-ray charge density studies of tetraacetylethane

Single crystal neutron diffraction data have been collected on a sample of enolized 3,4-diacetyl-2,5-hexanedione (tetraacetylethane, TAE) at five temperatures between 20 and 298 K to characterize the temperature-dependent behavior of the short, strong, intramolecular hydrogen bond. Upon decreasing the temperature from 298 K to 20 K, the O2-H1 distance decreases from 1.171(11) to 1.081(2) A and the O1...H1 distance increases from 1.327(10) to 1.416(6) A. The convergence of the C-O bond lengths from inequivalent distances at low temperature to identical values (1.285(4) A) at 298 K is consistent with a resonance-assisted hydrogen bond. However, a rigid bond analysis indicates that the structure at 298 K is disordered. The disorder vanishes at lower temperatures. Short intermolecular C-H...O contacts may be responsible for the ordering at low temperature. The intramolecular O...O distance (2.432 +/- 0.006 A) does not change with temperature. X-ray data at 20 K were measured to analyze the charge density and to gain additional insight into the nature of the strong hydrogen bond. Quantum mechanical calculations demonstrate that periodic boundary conditions provide significant enhancement over gas phase models in that superior agreement with the experimental structure is achieved when applying periodicity. One-dimensional potential energy calculations followed by quantum treatment of the proton reproduce the location of the proton nearer to the O2 site reasonably well, although they overestimate the O-H distance at low temperatures. The choice of the single-point energy calculation strategy for the proton potential is justified by the fact that the proton is preferably located nearer to O2 rather than being equally distant to O1 and O2 or evenly distributed (disordered) between them.     

High precision delta(17)O isotope measurements of oxygen from silicates and other oxides: method and applications

The use of infrared laser-assisted fluorination to release oxygen from milligram quantities of silicates or other oxide mineral grains is a well-established technique. However, relatively few studies have reported the optimisation of this procedure for oxygen-17 isotope measurements. We describe here details of an analytical system using infrared (10 μm) laser-assisted fluorination, in conjunction with a dual inlet mass spectrometer of high resolving power ( approximately 250) to provide (17)O and (18)O oxygen isotope measurements from 0.5-2 mg of silicates or other oxide mineral grains. Respective precisions (1) of typically 0.08 and 0.04 per thousand are obtained for the complete analytical procedure. Departures from the mass-dependent oxygen isotope fractionation line are quantified by Delta(17)O; our precision (1) of such measurements on individual samples is shown to be +/-0.024 per thousand. In turn, this permits the offset between parallel, mass-dependent fractionation lines to be characterised to substantially greater precision than has been possible hitherto. Application of this system to investigate the (17)O versus (18)O relationship for numerous terrestrial whole-rock and mineral samples, of diverse geological origins and age, indicates that the complete data set may be described by a single, mass-dependent fractionation line of slope 0.5244+/- 0.00038 (standard error). Copyright 1999 John Wiley & Sons, Ltd.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

Solid-phase microextraction gas chromatography/mass spectrometry: a new method for species identification of truffles

This study describes a rapid method to identify different truffle species by analysis of their volatile compound fraction using static headspace solid-phase microextraction gas chromatography/mass spectrometry. The volatile organic compounds (VOCs) were extracted using a new 2-cm 50/30 microm DVB/CAR/PDMS fiber placed for 10 min in the headspace of the truffle sample with the vial maintained at 20 degrees C (in a thermostatically controlled analysis room). The mass spectra of the VOC chromatograms were represented as 'fingerprints' of the analysed samples. Next, stepwise factorial discriminant analysis afforded a limited number of characteristic fragment ions that allowed a classification of the truffle species studied. This new method provides an effective approach to rapid quality control and identification of truffle species by analysis of their volatile fraction. Moreover, this method offers the advantage of minimizing thermal, mechanical, and chemical modifications of the truffles, thereby reducing the risk of analytical artifacts.