Modification of the lunar surface by solar wind ion bombardment

Trivalent osmium ions are substitutionally incorporated into aqueous precipitates and melt-grown single crystals of AgBr and AgC1. The ions are distributed between three structurally inequivalent lattice sites in both salts. From epr studies, we have inferred that these sites are distinguished by the arrangement of charge-compensating silver ion vacancies in the two closest cation subshells. The most reasonable dopant-vacancy configurations have been deduced from the epr data. These configurations persist up to at least 300 K, and are compared with those observed in other trivalent metal ion doped systems.     

Catalytic properties of the dioxomolybdenum siloxide MoO2(OSiPh3)2 and its 2,2'-bipyridine adduct MoO2(OSiPh3)2(bpy)

The tetrahedral triphenylsiloxy complex MoO(2)(OSiPh(3))(2) (1) and its Lewis base adduct with 2,2'-bipyridine, MoO(2)(OSiPh(3))(2)(bpy) (2), were prepared and characterised by IR/Raman spectroscopy, and thermogravimetric analysis. Both compounds catalyse the epoxidation of cis-cyclooctene at 55 degrees C using tert-butylhydroperoxide (t-BuOOH) is decane as the oxidant, giving 1,2-epoxycyclooctane as the only product. The best results were obtained in the absence of a co-solvent (other than the decane) or in the presence of 1,2-dichloroethane, while much lower activities were obtained when hexane or acetonitrile were added. With no co-solvent, catalyst 1 (initial activity 272 mol x molMo(-1) x h(-1)for a catalyst:substrate: oxidant molar ratio of 1:100:150) is much more active than 2(initial activity 12 mol x molMo(-1) x h(-1)). The initial reaction rates showed first order dependence with respect to the initial concentration of olefin. With respect to the initial amount of oxidant, the rate order dependence for 1 (1.9) was higher than that for 2 (1.6).The dependence of the initial reaction rate on reaction temperature and initial amount of catalyst was also studied for both catalysts. The lower apparent activation energy of 1 (11 kcal x mol(-1)) as compared with 2 (20 kcal x mol(-1)) is in accordance with the higher activity of the former.     

Modification of the luminescence properties of an Europium(III) Tris(β-diketonate) Complex by Inclusion in γ-cyclodextrin and 2,3,6-trimethyl-γ-cyclodextrin

A 1:1 inclusion compound between octakis(2,3,6-tri-O-methyl)-γ-cyclodextrin (TRIMEG) and the chelate complex Eu(NTA)₃·2H₂O (NTA=1-(2-naphthoyl)-3,3,3-trifluoroacetonate) was prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and photoluminescence spectroscopy. The results were compared with those obtained for the corresponding native γ-CD adduct. Excitation and emission spectra were measured, and the lifetimes were determined for the Eu³⁺ first excited state (⁵D₀). The results indicate the presence of only one low-symmetry environment for the Eu³⁺ cations in the inclusion compounds. Encapsulation of the Europium complex in the two CDs increases the quantum efficiency of the ligand-to-metal energy transfer pathway, but the efficiency of the Eu³⁺ sensitization was significantly higher with TRIMEG as the host molecule. This may be related with the observation that the two hosts appear to have different influences on the Eu³⁺ coordination environments for the guest molecule.     

The use of stable carbon isotope analysis to detect the abuse of testosterone in cattle.

The use of stable carbon isotope analysis to detect the administration of anabolic steroids to cattle was investigated. Samples were extracted by solid-phase extraction on C18 cartridges. Stable isotope ratios (13C:12C) were measured by gas chromatography-isotope ratio mass spectrometry (GC-IRMS) of the underivatised extracts. A programmed temperature vaporiser (PTV) injector was installed in the GC-IRMS system, which conferred a number of advantages. First, it allowed large volumes of sample to be injected whilst the injector liner was cool. The solvent was subsequently vented to the atmosphere prior to transfer of the sample to the GC column. Thus a significantly greater amount of sample could be presented for analysis, thereby increasing the sensitivity. Second, by this means virtually all the solvent could be removed prior to analysis. This eliminates solvent peak tailing, which can be a major problem in GC-IRMS. Finally, the PTV allowed the use of higher initial GC oven temperatures, which in turn facilitated the analysis of underivatised steroids by reducing the GC run time and improving the chromatographic peak shape. The carbon isotope composition of 5 beta-androstane-3 alpha,17 alpha-diol, the major metabolite of testosterone found in bovine bile, was measured in bile samples from untreated cattle and from cattle injected intramuscularly with testosterone or a mixture of testosterone esters. There was considerable inter-animal variation in the values obtained and there was no significant difference between samples from treated and untreated animals. However, when the isotopic composition of the metabolite was normalised with respect to that of an endogenous reference compound (cholesterol) in the same sample, the difference between treated and untreated animals become statistically significant.     

Synthesis, characterization and antitumor activity of 1,2-disubstituted ferrocenes and cyclodextrin inclusion complexes

Seven different ferrocene derivatives have been tested in vitro against Ehrlich ascites tumor cells. Neither ferrocene nor the monosubstituted derivative N,N-dimethylaminomethylferrocene showed cytotoxic activity (IC₅₀ > 1000 μM for 3 h treatments). Better results were obtained with 1,2-disubstituted derivatives. The IC₅₀ values ranged from 376.6 μM for 1,2-diformylferrocene to 71.2 μM for racemic 2-(N,N-dimethylaminomethyl)ferrocenecarboxamide. The latter derivative was also encapsulated in native β-cyclodextrin (CD), heptakis-2,3,6-tri-O-methyl-β-CD (TRIMEB) and 2-hydroxypropyl-β-CD (HPβCD) to give 1:1 (host:guest) inclusion compounds. The existence of true inclusion complexes in the solid state was confirmed by a combination of powder X-ray diffraction, thermogravimetric analysis, FTIR and ¹³C CP MAS NMR spectroscopy. The IC₅₀ value for the β-CD inclusion compound was identical to that obtained for the nonincluded ferrocene derivative. By contrast, the inclusion compounds comprising TRIMEB and HPβCD yielded IC₅₀ values of 25.2 and 20.0 μM, respectively. No obvious relationship could be established between the redox behavior of the compounds determined by cyclic voltammetry and the biochemical data.     

A highly efficient dioxo(mu-oxo)molybdenum(VI) dimer catalyst for olefin epoxidation

The oxo-bridged dimer [Mo(2)O(4)(mu(2)-O)Cl(2)(pzH)(4)] (1; pzH = pyrazole) exhibits unusually high activity in the liquid-phase catalytic epoxidation of the cyclic olefins cyclooctene and (R)-(+)-limonene under mild conditions and in the absence of additional organic solvents, using tert-butyl hydroperoxide as the oxidant. The complex is stable under the reaction conditions and can be used in further catalytic runs without significant loss of performance. An X-ray crystallographic investigation reveals that 1 has an unprecedented and extremely rare all-cis configuration at each of the MoO(2)-(mu(2)-O)Cl(pzH)(2) cores, which can be understood by considering supramolecular contacts and geometric factors.     

Immobilization of oxomolybdenum species in a layered double hydroxide pillared by 2,2'-bipyridine-5,5'-dicarboxylate anions

A Zn,Al layered double hydroxide (LDH) with Zn/Al = 1.45 and containing nitrate anions was prepared by coprecipitation and characterized by powder X-ray diffraction, Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS), thermogravimetric analysis, FTIR and FT Raman spectroscopy, and (27)Al MAS NMR spectroscopy. Three Zn...O and four Zn...M (M = Zn, Al) shells could be fitted to the low-temperature (40 K) EXAFS spectrum, in accordance with a model for an ordered cationic sheet. The nitrate anions were easily exchanged by 2,2'-bipyridine-5,5'-dicarboxylate anions, resulting in an increase in the basal spacing from 9 to 18 A. The basal spacing of the pillared derivative indicates that the anions are arranged with their longest dimension nearly perpendicular to the host layers. This material exhibits a high encapsulating ability, as evidenced by its interaction with a dichloromethane solution of the dioxomolybdenum(VI) complex MoO(2)Cl(2)(THF)(2). A material with a metal loading of 11.2 wt % was obtained. Molybdenum K-edge EXAFS analysis could not substantiate the formation of a supported complex of the type MoO(2)Cl(2)(N-N) but instead indicated the formation of unidentate-bridged entities of the type [O(2)Mo-O-MoO(2)] with a metal-metal separation of 3.29 A. The molybdenum-containing LDH was active as a catalyst for the liquid-phase epoxidation of cis-cyclooctene, 1-octene, and trans-2-octene using tert-butyl hydroperoxide as the oxygen source, yielding the corresponding epoxides as the only products. For reactions carried out with no additional solvent (other than n-decane) or in the presence of 1,2-dichloroethane, the solid catalyst could be recycled with no major loss of activity. Other tests confirmed that the systems functioned as true heterogeneous catalysts.     

Ion trap mass spectrometry on a comet nucleus: the Ptolemy instrument and the Rosetta space mission

In May 2014, the Rosetta spacecraft is scheduled to rendezvous with the comet Churyumov-Gerasimenko ('67P'). One of the instruments on board the 'Lander' which will descend on to the surface of the comet is a miniaturised GC/MS system that incorporates an ion trap mass spectrometer, specially developed for isotope ratio analysis. This article describes the development and optimisation of the ion trap for this unique application, and presents a summary of the range of pre-programmed experiments that will contribute to the characterisation of the solid and volatile cometary materials.     

High precision delta(17)O isotope measurements of oxygen from silicates and other oxides: method and applications

The use of infrared laser-assisted fluorination to release oxygen from milligram quantities of silicates or other oxide mineral grains is a well-established technique. However, relatively few studies have reported the optimisation of this procedure for oxygen-17 isotope measurements. We describe here details of an analytical system using infrared (10 μm) laser-assisted fluorination, in conjunction with a dual inlet mass spectrometer of high resolving power ( approximately 250) to provide (17)O and (18)O oxygen isotope measurements from 0.5-2 mg of silicates or other oxide mineral grains. Respective precisions (1) of typically 0.08 and 0.04 per thousand are obtained for the complete analytical procedure. Departures from the mass-dependent oxygen isotope fractionation line are quantified by Delta(17)O; our precision (1) of such measurements on individual samples is shown to be +/-0.024 per thousand. In turn, this permits the offset between parallel, mass-dependent fractionation lines to be characterised to substantially greater precision than has been possible hitherto. Application of this system to investigate the (17)O versus (18)O relationship for numerous terrestrial whole-rock and mineral samples, of diverse geological origins and age, indicates that the complete data set may be described by a single, mass-dependent fractionation line of slope 0.5244+/- 0.00038 (standard error). Copyright 1999 John Wiley & Sons, Ltd.