Flame dynamics under various backpressures in a model scramjet with and without a cavity flameholder

Flame dynamics under various backpressure conditions were experimentally investigated using direct flame visualization, high-speed CH* chemiluminescence imaging, and wall pressure measurements. The stagnation pressure and temperature used in the present study were 100 kPa and 2500 K, respectively, with a freestream Mach number of 4.5. Rectangular scramjet models with and without a cavity were used to explore the effects of the cavity on flame dynamics when operating in scramjet mode, ramjet mode, and unstart. The flow rate of the ethylene jet was varied to impose backpressures corresponding to each operation mode. For both models, reverse flame propagation was observed for ramjet mode and unstart. For ramjet mode, flame fluctuation occurred within the isolator due to the coupling of fluid dynamics and combustion. The presence of a cavity enhanced combustion and reduced flame fluctuation in both scram and ramjet mode. The cavity promoted unstart because of the greater heat release from combustion. Further research using spatially resolved diagnostic techniques is needed to identify the flame locations for ramjet mode and unstart.     

Comparison of reactivity on step and terrace sites of Pd (3 3 2) surface for the dissociative adsorption of hydrogen: A quantum chemical molecular dynamics study

The notion of “active sites” is fundamental to heterogeneous catalysis. However, the exact nature of the active sites, and hence the mechanism by which they act, are still largely a matter of speculation. In this study, we have presented a systematic quantum chemical molecular dynamics (QCMD) calculations for the interaction of hydrogen on different step and terrace sites of the Pd (3 3 2) surface. Finally the dissociative adsorption of hydrogen on step and terrace as well as the influence of surface hydrogen vacancy for the dissociative adsorption of hydrogen has been investigated through QCMD. This is a state-of-the-art method for calculating the interaction of atoms and molecules with metal surfaces. It is found that fully hydrogen covered (saturated) step sites can dissociate hydrogen moderately and that a monovacancy surface is suitable for significant dissociative adsorption of hydrogen. However in terrace site of the surface we have found that dissociation of hydrogen takes place only on Pd sites where the metal atom is not bound to any pre-adsorbed hydrogen atoms. Furthermore, from the molecular dynamics and electronic structure calculations, we identify a number of consequences for the interpretation and modeling of diffusion experiments demonstrating the coverage and directional dependence of atomic hydrogen diffusion on stepped palladium surface.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.     

Study of reduction processes over cerium oxide surfaces with atomic hydrogen using ultra accelerated quantum chemical molecular dynamics

Ceria plays an important role in catalysis, due to its ability to store and release oxygen depending on the condition present in the catalyst environment. To analyze the role of ceria in catalytic reactions, it is necessary to know the details of the interaction of ceria surface with environmentally sensitive molecules. This study was conducted using ultra accelerated quantum chemical molecular dynamics. Its purpose was to investigate the reduction process of the (1 1 1) and (1 1 0) surfaces of ceria with atomic hydrogen as well as water desorption mechanisms from the surfaces. This simulation demonstrated that when a high-energy colliding hydrogen atoms are adsorbed on the ceria, it pulls up an O atom from the ceria surfaces and results in the formation of a H₂O molecule. This is the first dynamics simulation related to such reduction processes based on quantum chemistry.     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

Combinatorial computational chemistry approach of tight-binding quantum chemical molecular dynamics method to the design of the automotive catalysts

Recently, we have developed a new tight-binding quantum chemical molecular dynamics program “Colors” for combinatorial computational chemistry approach. This methodology is based on our original tight-binding approximation and realized over 5000 times acceleration compared to the conventional first-principles molecular dynamics method. In the present study, we applied our new program to the simulations on various realistic large-scale models of the automotive three-way catalysts, ultrafine Pt particle/CeO₂(111) support. Significant electron transfer from the Pt particle to the CeO₂(111) surface was observed and it was found to strongly depend on the size of the Pt particle. Furthermore, our simulation results suggest that the reduction of the Ce atom due to the electron transfer from the Pt particle to the CeO₂ surface is a main reason for the strong interaction of the Pt particle and CeO₂(111) support.     

Grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticle and carbon black surfaces

The surface grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticles and carbon black was investigated. The grafting of hyperbranched cyclotriphosphazene polymer onto these surfaces was achieved by the repeated reactions of hexachlorocyclotriphosphazene with hexamethylenediamine from surface amino groups and sodium carboxylate groups, respectively. The percentage of grafting onto silica and carbon black surfaces exceeded 760 and 390%, respectively. However, it proved difficult to achieve the theoretical growth of cyclotriphosphazene polymer from these surfaces because of steric hindrance. The introduction of sulfonic acid groups was successfully achieved by the reaction of terminal chlorophosphazene groups of the hyperbranched polymer‐grafted silica and carbon black with sulfanilic acid. The content of sulfonic acid groups introduced onto silica and carbon black surfaces was 4.98 mmol/g and 5.70 mmol/g, respectively. The sulfonated cyclotriphosphazene polymer‐grafted carbon black was extremely hydrophilic, yielding stable colloidal dispersions in polar solvents. The sulfonated cyclotriphosphazene polymer‐grafted silica and carbon black showed ionic conductivity, with the conductance increasing exponentially with increasing relative humidity and temperature. This study may offer important leads in the application of silica nanoparticles and carbon black in polymeric membranes for fuel cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4218–4226, 2008     

Visualization of Heterogeneous Oxygen Storage Behavior in Platinum‐Supported Cerium‐Zirconium Oxide Three‐Way Catalyst Particles by Hard X‐ray Spectro‐Ptychography

The cerium density and valence in micrometer‐size platinum‐supported cerium–zirconium oxide Pt/Ce₂Zr₂O_x (x=7–8) three‐way catalyst particles were successfully mapped by hard X‐ray spectro‐ptychography (ptychographic‐X‐ray absorption fine structure, XAFS). The analysis of correlation between the Ce density and valence in ptychographic‐XAFS images suggested the existence of several oxidation behaviors in the oxygen storage process in the Ce₂Zr₂O_x particles. Ptychographic‐XAFS will open up the nanoscale chemical imaging and structural analysis of heterogeneous catalysts.     

Imaging of Oxygen Diffusion in Individual Platinum/Ce2Zr2Ox Catalyst Particles During Oxygen Storage and Release

The spatial distribution of Ce³⁺ and Ce⁴⁺ in each particle of Ce₂Zr₂O_x in a three‐way conversion catalyst system was successfully imaged during an oxygen storage/release cycle by scanning X‐ray absorption fine structure (XAFS) using hard X‐ray nanobeams. For the first time, nano‐XAFS imaging visualized and identified the modes of non‐uniform oxygen diffusion from the interface of Pt catalyst and Ce₂Zr₂O_x support and the active parts in individual catalyst particles.