Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

Highly efficient,economic, and recyclable glutathione decorated magnetically separable nanocomposite for uranium(VI) adsorption from aqueous solution

A green and environment-friendly magnetically separable nanocomposite, glutathione@magnetite was fabricated sonochemically through the functionalization of Fe₃O₄ by glutathione which was well characterized using Fourier-transform infrared spectroscopy, ultravoilet-visible spectroscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometer, Brunauer-Emmett-Teller, and high-resolution transmission electron microscope. The parameters affecting adsorption including pH, temperature, contact time, initial adsorbate concentration, and adsorbent amount were optimized by batch experiments. The magnetic glutathione@magnetite was applied for the removal of uranium(VI) in water with maximum adsorption capacity found to be 333.33 mg/g in 120 min at a neutral pH at 25 °C showing high efficiency for U(VI) ions. Furthermore, adsorption results obtained from UV-vis spectroscopy were validated by inductively coupled plasma optical emission spectroscopy. The thermodynamic parameters, viz Gibbs free energy (ΔGº), standard enthalpy change (ΔHº), and standard entropy change (ΔSº) of the process were calculated using the Langmuir constants. The pseudo-second-order kinetics model is seen to be applicable for describing the uptake process using a kinetics test. Moreover, desorption studies reveals that glutathione@magnetite can be used repeatedly, and removal efficiency shows only a small decrease after six cycles. Thus, glutathione@magnetite acts as a potential adsorbent for the removal of U(VI) from the water with great adsorption performance.     

Organotin(IV) complexes of NSAID,ibuprofen, X-ray structure of Ph3Sn(IBF), binding and cleavage interaction with DNA and in vitro cytotoxic studies of several organotin complexes of drugs

This study encompasses the synthesis and characterization of organotin(IV) derivatives of non-steroidal anti-inflammatory drug ibuprofen (IBF), viz. [(Me₃Sn)(IBF)] ( 1 ), [(Bu₃Sn)(IBF)] ( 2 ), [Ph₃Sn(IBF)] ( 3 ), {[Me₂Sn(IBF)]₂O}₂ ( 4 ) and [Bu₂Sn(IBF)₂] ( 5 ). The crystal structure of complex 3 , [Ph₃Sn(IBF)], indicates a highly distorted tetrahedral (td) geometry with anisobidentate mode of coordination of the carboxylate group with tin atom, and a similar structure has been proposed for other two triorganotin(IV) derivatives. Moreover, the DFT (density functional theory) calculation and other studies have verified a dimer distannoxane type of structure for complex 4 , {[Me₂Sn(IBF)]₂O}₂. Complex 5 has been found to exhibit a highly distorted octahedral geometry around the tin atom. To investigate the DNA binding profile of the synthesized complexes, viscosity measurement, UV–vis and fluorescence titrations were performed, which revealed an intercalative type of binding with DNA for IBF and complex 5 and external binding in case of the complexes 1 and 2 ; complexes 3 and 4 could not be studied owing to their insufficient solubility in tris buffer. Plasmid DNA fragmentation studies of IBF and complexes 1 , 2 and 5 indicate that they cleaved the pBR322 plasmid potentially. Further, the drugs IBF {2-[4-(2-methylpropyl)phenyl]propanoic acid}, MESNA (sodium 2-mercaptoethane-sulfonate), warfarin [2H-1-benzopyran-2-one,4-hydroxy-3-(3-oxo-1-phenylbutyl)], sulindac (2-{5-fluoro-1-[(4-methanesulfinylphenyl) methylidene]-2-methyl-1H-inden-3-yl}acetic acid) and their corresponding organotin(IV) complexes 1–19 (complexes 6–19 were synthesized/reported previously) were screened in vitro for cytotoxicity against human cancer cell lines viz. DU145 (prostate cancer), HCT-15 (colon adenocarcinoma), Caco-2 (colorectal adenocarcinoma), MCF-7 (mammary cancer), LNCaP (androgen-sensitive prostate adenocarcinoma) and HeLa (cervical cancer), through MTT reduction assay and the cause of cell death was investigated through acridine orange/ethidium bromide staining of cells and DNA fragmentation assay. The probable structure–cytotoxicity relationship is also discussed. The major role of apoptosis along with small necrosis was also validated by flow cytometry assay using annexin V–fluorescein isothiocyanate and propidium iodide analysis.     

Glutathione as green corrosion inhibitor for 6061Al-SiC(p) composite in HCl medium: electrochemical and theoretical investigation

This research deals with the inhibition activity of glutathione in 0.5 M HCl on the corrosion behavior of 6061Al-SiC_(p) composite. Glutathione is an eco-friendly water-soluble inhibitor. Polarization results reveal the cathodic inhibitor behavior of glutathione (Gt). The inhibition performance of Gt increases by increasing its concentration and lowering the medium temperature. The decrease in the corrosion current density and increase in inhibition efficiency on increasing Gt concentration reveal the attenuation of composite corrosion. Experimental results indicate the mixed adsorption with predominantly physisorption of Gt molecules adsorption on the composite surface following Langmuir adsorption isotherm. The impedance measurements indicate the rise in polarization resistance with an increase in Gt concentration, showing the control of composite corrosion. The surface analysis of the corroded and inhibited composite samples using a scanning electron microscope and atomic force microscope supports Gt molecules’ adsorption. The quantum chemical calculations confirm the conclusions of the experimental studies.

     

Miniaturized surface engineered technologies for multiplex biosensing devices

The demand for quick, accurate, and affordable point-of-care (POC) devices increases with the advancement in the dimensions of nanotechnology and digital interfaces (Internet of Things). The future of diagnostic requires the platform which can provide us the following benefits i. e., on-site detection, qualitative as well as quantitative analysis, easy to use, portable, low sample requirement, cost-effective, and have multiplexing proficiency. Multiplex biosensing platforms (MBPs) have the above following advantages so are going to be mostly used in various healthcare applications in near future. MBPs have the potential to fulfill the ‘ASSURED’ criteria specified by the World Health Organization (WHO) for remote-limited settings. This review paper focuses on miniaturized platforms that have multiplexing benefits for the bioanalysis of different clinical samples related to various healthcare applications. In addition to this, screening of pesticides, antibiotics, and hazardous metal ions with these surface-engineered devices has also been accounted in food and environmental samples. Some of the advanced techniques including microfluidics (Lab-on-a-chip), wearable smart devices, and CRISPR/Cas system for multiplexing applications are briefly described here. Furthermore, various needs, challenges, and prospects in commercializing these multiplexed surface-engineered devices have been discussed in this review.     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Green Synthesis of Cuprous Oxide Nanoparticles Using Andean Capuli (Prunus serotina Ehrh. var. Capuli) Cherry

Journal of Cluster Science - Copper oxide nanoparticles have gained considerable attention in the past two decades due to their simplicity and exhibit a range of potentially useful physical...     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

One pot three component synthesis of spiro [indolo-3,10’-indeno[1,2-b]quinolin]-2,4,11’-triones as a new class of antifungal and antimicrobial agents

A simple and efficient three component procedure has been developed for the synthesis of highly substituted spiro[indolo-3,10'-indeno[1,2-b]quinolin]-2,4,11'-triones by one pot three component condensation of enaminones, isatin and indane-1,3-dione in ethanol:water (1:1) in presence of ceric ammonium nitrate (CAN) as catalyst. This method provides several advantages such as lesser reaction time, high yield of products and operational simplicity. The antimicrobial activity of some of the compounds has been investigated against six microbial strains, some of the tested compounds showed good antimicrobial activity.