Phase-field modeling of void evolution and swelling in materials under irradiation

Void swelling is an important phenomenon observed in both nuclear fuels and cladding materials in operating nuclear reactors. In this work we develop a phase-field model to simulate void evolution and void volume change in irradiated materials. Important material processes, including the generation of defects such as vacancies and self-interstitials, their diffusion and annihilation, and void nucleation and evolution, have been taken into account in this model. The thermodynamic and kinetic properties, such...     

The movement of a forager: strategies for the efficient use of resources

We study a simple model of a foraging animal that modifies the substrate on which itmoves. This substrate provides its only resource, and the forager manages it by taking alimited portion at each visited site. The resource recovers its value after the visitfollowing a relaxation law. We study different scenarios to analyze the efficiency of themanaging strategy, corresponding to control the bite size. We observe the non trivialemergence of a home range, that is visited in a periodic way. The duration of thecorresponding cycles and the transient until it emerges is affected by the bite size. Ourresults show that the most efficient use of the resource, measured as the balance betweengathering and traveled distance, corresponds to foragers that take larger portions butwithout exhausting the resource. We also analyze the use of space determining the numberof attractors of the dynamics, and we observe that it depends on the bite size and therecovery time of the resource.     

Elastic properties of thin adhesive interlayers

The effect of the geometrical and physical parameters of the filler (substrate) and the polymer matrix (adhesive) on the modulus of elasticity of discrete models of composites and adhesive compounds is studied. Emphasis is placed on investigation of the elasticity of the layer of adhesive (binding agent) positioned between hard substrates. Elasticity moduli of the epoxy polymer in the state of a thin layer and in the block (in the form of a free rod) upon their simultaneous fabrication in the process of polymer curing are compared. The results of theoretical solution of the problem of the dependence of the interlayer elasticity modulus and the layered composite on thickness, Poisson’s ratios, elasticity moduli, and other parameters of the adhesive and the substrate are presented. The solution in the closed form was obtained owing to the application of the contact-layer method.     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.     

Sensitivity kernel for surface scattering in a waveguide

Using the Born approximation, a linearized sensitivity kernel is derived to describe the relationship between a local change at the free surface and its effect on the acoustic propagation in the water column. The structure of the surface scattering kernel is investigated numerically and experimentally for the case of a waveguide at the ultrasonic scale. To better demonstrate the sensitivity of the multipath propagation to the introduction of a localized perturbation at the air-water interface, the kernel is formulated both in terms of point-to-point and beam-to-beam representations. Agreement between theory and experiment suggests applications to sensitivity analysis of the wavefield for sea surface perturbations.     

Enhancing the emergence rate of coherent wavefronts from ocean ambient noise correlations using spatio-temporal filters

Extracting coherent wavefronts between passive receivers using cross-correlations of ambient noise (CAN) provides a means for monitoring the seismoacoustic environment without using active sources. However, using cross-correlations between single receivers can require a long recording time in order to extract stable coherent arrivals from CAN. This becomes an issue if the propagation medium fluctuates significantly during the recording period. To address this issue, this article presents a general spatio-temporal filtering procedure to enhance the emergence rate for coherent wavefronts extracted from time-averaged ambient noise correlations between two spatially separated arrays. The robustness of this array-based CAN technique is investigated using ambient shipping noise recorded over 24?h in the frequency band [250-850 Hz] on two vertical line arrays deployed 143?m apart in shallow water (depth 20?m). Experimental results confirm that the array-based CAN technique can significantly reduce the recording duration (e.g., from 22?h to 30?min) required for extracting coherent wavefronts of sufficient amplitude (e.g., 20?dB over residual temporal fluctations) when compared to conventional CAN implementations between single pairs of hydrophones. These improvements of the CAN technique could benefit the development of noise-based ocean monitoring applications such as passive acoustic tomography.     

Adhesive ability of a heat-resistant double-chain polymer and the strength of CFRP based on it

The adhesive ability of a heat-resistant polyiminoquinazolindione (PIQD) binder, based on a double-chain polymer, and the physicomechanical characteristics of unidirectional CFRPs made with it are investigated. It is shown that, at room temperature, the strength of model adhesive joints (PIQD-steel wire) and of the CFRPs in shear and bending is rather low — about half of that of similar specimens based on an epoxy binder. At the same time, all their mechanical characteristics, to a large measure (50%), are retained at temperatures up to 450°C, which considerably exceeds the heat resistance of all polymer matrices used at the present time. The elastic modulus of the CFRPs in bending practically remains the same up to 450°C. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 44, No. 4, pp. 535–546, July–August, 2008.