Hydrophilic Microspheres Containing αα-tert Butoxy-ωω-vinylbenzyl-polyglycidol for Immunodiagnostics: Synthesis,Properties and Biomedical Applications

Summary: Synthesis, characteristics and medical diagnostic application of core-shell poly(styrene/α-tert-butoxy-ω-(vinylbenzyl)polyglycidol) (P(S/PGL)) microspheres are described. The particles were prepared by soap-free emulsion polymerization of styrene and α-tert-butoxy-ω-(vinylbenzyl)polyglycidol macromonomer (PGL) initiated with potassium persulfate. The polymerization in water yielded microspheres with diameters in the range from 220 to 650 nm, depending on concentration of the macromonomer. Polydispersity was usually below 1.06. The fraction of PGL in interfacial layer of microspheres ranged from 0 to 42 mol.% (estimated by XPS). Microspheres suspended in NaCl solutions manifested fully reversible swelling-deswelling properties of their interfacial layer with characteristic transition temperature (T_t) slightly dependent on NaCl concentration. The adsorption of human serum albumin on the surface of P(S/PGL) microspheres was highly reduced when the PGL surface fraction exceeded 40 mol.%. P(S/PGL) microspheres with immobilized antigens Helicobacter pylori were used for detection of antibodies against. The test was based on monitoring differences in electrophoretic mobility of P(S/PGL) microspheres covalently bound H. pylori antigens and antibodies against H. pylori in blood serum.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

Matched-field depth estimation for active sonar

This work concerns the problem of estimating the depth of a submerged scatterer in a shallow-water ocean by using an active sonar and a horizontal receiver array. As in passive matched-field processing (MFP) techniques, numerical modeling of multipath propagation is used to facilitate localization. However, unlike passive MFP methods where estimation of source range is critically dependent on relative modal phase modeling, in active sonar source range is approximately known from travel-time measurements. Thus the proposed matched-field depth estimation (MFDE) method does not require knowledge of the complex relative multipath amplitudes which also depend on the unknown scatterer characteristics. Depth localization is achieved by modeling depth-dependent relative delays and elevation angle spreads between multipaths. A maximum likelihood depth estimate is derived under the assumption that returns from a sequence of pings are uncorrelated and the scatterer is at constant depth. The Cramér-Rao lower bound on depth estimation mean-square-error is computed and compared with Monte Carlo simulation results for a typical range-dependent, shallow-water Mediterranean environment. Depth estimation performance to within 10% of the water column depth is predicted at signal-to-noise ratios of greater than 10 dB. Real data results are reported for depth estimation of an echo repeater to within 10-m accuracy in this same shallow water environment.     

Spin-singlet clusters in the ladder compound NaV2O5

The space group of alpha(')-NaV2O5 turns below T(c) = 34 K from Pmmn with all V sites equivalent, into Fmm2 with three independent vanadium sites per layer. This is incompatible with models of charge ordering into V4+ and V5+. Our structure determination indicates that the phase transition consists of a charge ordering with three distinct valence states, formally V4+, V4.5+, and V5+. The singlet formation is not associated with dimerization on the spin ladder, but with the formation of spin clusters. Finally, we ascribe the quadrupling of the c axis to the large polarizability of the V2O5 skeleton.     

Dependence of pulser driving responses on electrical and motional characteristics of NDE ultrasonic probes

Acoustic performance in ultrasonic transmitters can be improved by means of a suitable electrical driving response and matching/tuning networks. It is important to predict this electrical response, but doing so is not easy because it departs notably from the nominal pattern with the loading probes. In practice, the analysis of HV pulser spikes in NDE applications requires fairly complex models in the transient regime and, in addition, non-linear problems could arise, especially in the case of tuned transmitters. In this paper, the most relevant influences of loading characteristics of NDT ultrasonic probes on the pulser electrical driving responses are evaluated in time and frequency domains. Conventional pulse generators and typical NDE pulsers are considered. Driving responses are analysed across commercial ultrasonic probes and, alternatively, across similar purely electrical loads. Distinct influences on pulser responses from electrical and motional sections of the probes are identified. All these aspects are studied on the basis of experimental and computer results.     

A waveguide invariant adaptive matched filter for active sonar target depth classification

This paper addresses depth discrimination of a water column target from bottom clutter discretes in wideband active sonar. To facilitate classification, the waveguide invariant property is used to derive multiple snapshots by uniformly sub-sampling the short-time Fourier transform (STFT) coefficients of a single ping of wideband active sonar data. The sub-sampled target snapshots are used to define a waveguide invariant spectral density matrix (WI-SDM), which allows the application of adaptive matched-filtering based approaches for target depth classification. Depth classification is achieved using a waveguide invariant minimum variance filter (WI-MVF) which matches the observed WI-SDM to depth-dependent signal replica vectors generated from a normal mode model. Robustness to environmental mismatch is achieved by adding environmental perturbation constraints (EPC) derived from signal covariance matrices averaged over the uncertain channel parameters. Simulation and real data results from the SCARAB98 and CLUTTER09 experiments in the Mediterranean Sea are presented to illustrate the approach. Receiver operating characteristics (ROC) for robust waveguide invariant depth classification approaches are presented which illustrate performance under uncertain environmental conditions.