Cytotoxic arylbenzofuran and stilbene derivatives from the twigs of Artocarpus heterophyllus

Four new natural products, including three arylbenzofurans named heterophyllenes A-C (1–3), and one stilbene named heterophyllene D (4), together with twenty-one known compounds were isolated from the twigs of Artocarpus heterophyllus and their structures elucidated by spectroscopic methods, mainly 1D and 2D NMR spectroscopy. The cytotoxic activity of selected compounds against KB, MCF-7 and NCI-H187 cell lines was evaluated. Heterophyllene C (3) exhibited cytotoxicity against the MCF-7 cell line with an IC₅₀ value of 12.56 μM. Additionally, the known compounds norartocarpin and artocarpin showed cytotoxic activity against MCF-7 and KB cell lines with IC₅₀ values of 10.04 and 13.57 μM, respectively. Both compounds also displayed cytotoxicity against the NCI-H187 cell line with values of 14.78 and 14.21 μM, respectively.     

Furo[3,2-h]isochroman, furo[3,2-h]isoquinoline, isochroman, phenol, pyranone, and pyrone derivatives from the sea fan-derived fungus Penicillium sp. PSU-F40

Nine new fungal metabolites, penicisochromans A-E, penicipyrone, penicipyranone, peniciphenol, and penicisoquinoline, were isolated from the sea fan-derived fungus Penicillium sp. PSU-F40 together with five known compounds. Their structures were determined by spectroscopic analysis. Their antibacterial activity against the standard Staphylococcus aureus ATCC 25923 and methicillin-resistant S. aureus was evaluated.     

Probing defect sites on TiO2 with [Re3(CO)12H3]: spectroscopic characterization of the surface species

Samples of the anatase phase of titania were treated under vacuum to create Ti(3+) surface-defect sites and surface O(-) and O(2) (-) species (indicated by electron paramagnetic resonance (EPR) spectra), accompanied by the disappearance of bridging surface OH groups and the formation of terminal Ti(3+)-OH groups (indicated by IR spectra). EPR spectra showed that the probe molecule [Re(3)(CO)(12)H(3)] reacted preferentially with the Ti(3+) sites, forming Ti(4+) sites with OH groups as the [Re(3)(CO)(12)H(3)] was adsorbed. Extended X-ray absorption fine structure (EXAFS) spectra showed that these clusters were deprotonated upon adsorption, with the triangular metal frame remaining intact; EPR spectra demonstrated the simultaneous removal of surface O(-) and O(2) (-) species. The data determined by the three complementary techniques form the basis of a schematic representation of the surface chemistry. According to this picture, during evacuation at 773 K, defect sites are formed on hydroxylated titania as a bridging OH group is removed, forming two neighboring Ti(3+) sites, or, when a Ti(4+)-O bond is cleaved, forming a Ti(3+) site and an O(-) species, with the Ti(4+)-OH group being converted into a Ti(3+)-OH group. When the probe molecule [Re(3)(CO)(12)H(3)] is adsorbed on a titania surface with Ti(3+) defect sites, it reacts preferentially with these sites, becoming deprotonated, removing most of the oxygen radicals, and healing the defect sites.     

Benzopyranone,benzophenone, and xanthone derivatives from the soil fungus Penicillium citrinum PSU-RSPG95

Two new benzopyranones, named coniochaetones E (1) and F (2), one new xanthone, penicillone C (3), and one new benzophenone, penicillanone (4), are isolated from the soil fungus Penicillium citrinum PSU-RSPG95, together with ten known compounds. Their structures are identified on the basis of spectroscopic data. The isolated compounds are evaluated for their cytotoxic activity.     

浅水海豚三维空间定位与发声源级测量

详细阐述了单水听器和水听器阵列进行海豚定距定位的几何模型,以及利用不同接收通道间的时延差计算空间坐标的方法,结合实验数据计算了海豚在水中的三维空间坐标和回声定位信号的声源级,并开展了海豚运动轨迹追踪分析。结果表明,相对于单水听器,水听器阵列对测量环境和海豚行为的限制较少,但对采集设备的同步性和硬件连接有较高要求。误差分析表明水听器阵列在大于3 m的距离,定位误差可降低到5%以下。研究结果为精确计算海豚发声源级及海豚的声呐性能及行为研究提供了技术支撑。      

Oxygenated xanthones and biflavanoids from the twigs of Garcinia xanthochymus

Three new xanthones, xanthochymones A–C (1–3), together with six known compounds including two xanthones, three biflavanoids, and one mellein derivative are isolated from the methanol extract of the twigs of Garcinia xanthochymus. Their structures are identified on the basis of their spectroscopic data. Compound 3 displays moderate antibacterial activity against Staphylococcus aureus while compounds 2 and 3 are weakly active against methicillin-resistant S. aureus.     

NaOH改性WO3/SiO2催化剂催化2-丁烯和乙烯复分解制丙烯SurasaMaksasithorn,DamienP.Debecker,PiyasanPraserthdam,JoongjaiPanpranot,KongkiatSuriye,SirachayaKunjaraNaAyudhya简

A WO₃/SiO₂ catalyst is used in industry to produce propylene from 2-butene and ethylene metathesis. Catalysts with various WO₃ loading (4% to 10%) were prepared by impregnation and tested for the metathesis of ethene and trans-2-butene. Ion exchange of NaOH onto the WO₃/SiO₂ catalyst was used to mitigate the acidity of the catalysts in a controlled way. At low WO₃ loading, the treatment with large amounts of NaOH resulted in a significant decrease in metathesis activity concomitant with significant W leaching and marked structural changes (XRD, Raman). At higher WO₃ loading (6% to 10%), the treatment with NaOH mainly resulted in a decrease in acidity. FT-IR experiments after adsorption of pyridine showed that the Lewis acidic sites were poisoned by sodium. Nevertheless, the metathesis activity remained constant after the NaOH treatment. This suggested that the remaining acidity on the catalyst was enough to ensure the efficient formation of the carbene active sites. Interestingly, Na poisoning resulted in some modification of the selectivity. The mitigation of acidity was shown to favor propene selectivity over the formation of isomerization products (cis-2-butene, 1-butene, etc.). Moreover, treatment with NaOH led to a shorter induction period and reduced coke formation on the WO₃/SiO₂ catalyst.     

Control of Tisurface defect on TiO2 nanocrystal using various calcination atmospheres as the first step for surface defect creation and its application in photocatalysis

A new development to create the surface defect (Ti³⁺) on TiO₂ was reported in this paper and compared to the common methods which must prepare the crystalline TiO₂ in the first step prior, and then create the surface defect in the second step. In this work, the surface defect creation was performed in the first step coinciding with the crystalline TiO₂ preparation using the sol-gel method. The creation was performed by varying the amounts of oxygen fed during calcination. Based on the CO₂-temperature programmed desorption (CO₂-TPD) and electron spin resonance (ESR) results, the surface defect (Ti³⁺) substantially increased with the amount of oxygen fed. Moreover, the samples resulting from calcination were used as photocatalysts for ethylene decomposition. The reactivity of those samples was also discussed.     

Role of support nature （γ-Al2O3 and SiO2-Al2O3） on the performances of rhenium oxide catalysts in the metathesis of ethylene and 2-pentene

The metathesis of ethylene and 2-pentene was studied as an alternative route for propylene production over Re2O7/γ-Al2O3 and Re2O7/SiO2-Al2O3 catalysts. Both NH3 temperature-programmed desorption (NH3-TPD) and H2 temperature-programmed reduction (H2-TPR) results showed that Re2O7/SiO2-Al2O3 exhibited stronger acidity and weaker metal-support interaction than Re2O7/γ-Al2O3. At 35 60℃, isomerization free metathesis was observed only over Re2O7/γ-Al2O3, suggesting that the formation of metal-carbene metathesis active sites required only weak acidity. Our results suggest that on the Re2O7/SiO2-Al2O3, hydrido-rhenium species ([Re]-H) were formed in addition to the metathesis active sites, resulting in the isomerization of the initial 1-butene product into 2-butenes. A subsequent secondary metathesis reaction between these 2-butenes and the excess ethylene could explain the enhanced yields of propylene observed. The results demonstrate the potential for high yield of propylene from alternative feedstocks.