Model and nonlinear dynamic analysis of linear guideway subjected to external periodic excitation in five directions

Nonlinear Dynamics - Investigation of the dynamic characteristics of linear guideway is essential for enhancing structural performance of machine tools. However, few mechanical models are...     

Finite-time stabilization with extended dissipativity via a mixed control strategy for MJSs with hierarchical sensor failures

Nonlinear Dynamics - Based on a mixed control strategy, this study addresses the finite-time stabilization with extended dissipativity for Markov jump systems (MJSs) with unreliable...     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的     

资源有限网络计划的PRWI启发式优化方法

本文在综合考虑了有资源约束的网络计划结构特征、资源强度、时间约束等方面因素的基础上，提出了一种新的资源优化的启发式优化方法—ＰＲＷＩ方法，并通过分析证明了该方法处理问题的效果较现有的其它方法好。     

CH3S CH2SH异化反应的理论研究

利用密度泛函理论(DFT)和从头算(ab initio)研究了CH3S←→CH2SH互异化的反应机理．采用HF、B3LYP、MP2理论水平和中等基组6-31(d)，计算了CH3S、CH2SH及其过渡态的结构参数、谐振频率、零点能(ZPF)、总能量和相对能量，并利用B3LYP／6-31(d)的方法计算了反应的内禀反应坐标(IRC)，给出了分子构型和自旋污染沿反应坐标的变化曲线，以及最小能量曲线(MEP)、绝热能量曲线．此外，利用传统过渡态理论(CTST)研究了该互异化反应的速率常数和平衡常数在200～1000K的变化．     

Novel photoswitching dithienylethenes with ferrocene units

Two novel dithienylethenes with ferrocene units were synthesized by Wittig reaction. The structure of 2a has been established by X‐ray diffraction studies. They could reversibly interconvert between two thermally stable forms, an open and a closed one, using light of different wavelengths as triggers. Copyright © 2006 John Wiley & Sons, Ltd.     

橡胶高弹性大形变的唯象理论

通过简单的假定,由纯粹的数学论证推导出橡胶高弹性的储能函数公式,在橡胶大形变时,公式比统计理论的更能反映客观实际。     

粘度法研究高分子溶液行为的实验改进(Ⅱ)

高分子在粘度计毛细管管壁上的吸附不仅会导致毛细管有效管径减小，而且可以导致毛细管界面性质发生显著改变，具体表现为测定高分子溶液流过时间t之前和之后纯溶剂的流过时间t0和t0′与高分子溶液流过时间t对浓度作图外推到浓度为零时的值t0^*并不一致。不同温度时聚乙烯吡咯烷酮（PVP）水溶液粘度测定结果表明，当吸附讷发子显著改变了毛细管界面性质时，需要将高分子溶液粘度测定方法由t/t0′改为t/t0^*。经过改进的粘度测定方法不仅更加普适合理，而且更加简单有效。     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

二苯并噻吩亚砜的单晶结构及其π-π堆积作用理论研究

采用X射线衍射法测定二苯并噻吩亚砜单晶结构,发现晶体中二苯并噻吩亚砜分子以反平行三明治式的结构Ⅲ和反平行位移式的结构Ⅳ两种堆砌方式交替堆砌形成有序π-π堆积晶体。二苯并噻吩亚砜单晶结构属于三斜型,空间群为P1,晶体参数为:a=0.84712nm,b=0.94137nm,c=1.20380nm,α=97.866°,β=106.2630°,γ=96.437°,V=0.9014nm3,R1(全部数据)=0.0348和ωR2(全部数据)=0.0814。利用BHandH/6-31 G**方法计算了二苯并噻吩亚砜分子间的π-π堆积作用,Ⅲ和Ⅳ堆砌模式的π-π堆积效应作用能相当大,其计算值分别为-36.06kJ/mol和-39.83kJ/mol,电荷分布表明正负电荷匹配是稳定晶体π-π堆积体系的重要因素。