Tegoprens in anaerobic digestion of a mixture of cheese whey,poultry waste,and cattle dung for improved biomethanation

To obtain enriched methane content and improve the anaerobic digestion of a mixture of cattle dung, poultry waste, and cheese whey, the effect of various doses of Tegoprens: T-3012, T-3022, T-5842, T-5843, T-5851, T-5852 has been studied, in bench-scale digesters. Among them, Tegoprens 3022 showed more than a 45% increase in gas production with higher methane content.     

LC–MS Determination of Gabapentin from Human Plasma

Gabapentin is an anticonvulsant drug used for the treatment of epilepsy. It is not bound to plasma protein and is not metabolized. A high performance liquid chromatography–mass spectrometric micro method is described in this report for its determination from human plasma. Chromatography was performed on a 50 × 4.6 mm, 4 μm nitrile column and the parent ion detected in the positive ionization mode on single quadrupole analyzer (Q1MI) with atmospheric pressure ionization source. Extraction was carried out on C₁₈, 100 mg/3cc cartridge using 10 μL sample volume. The mean extraction recovery was 97% and within batch and between batch coefficients of variation were <9%. Lack of interference from endogenous substances helped in achieving a highly sensitive method without the need for monitoring fragment ions. The lowest concentration injected on column for calibration curve was 195 pg (range 0.5–64 ng). The method was applied for analysis of samples from a cross-over bio-equivalence study comparing two formulations.     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

Effect of Artabotrys odoratissimus extract as an environmentally sustainable inhibitor for mild steel corrosion in 0.5 M H2SO4 media

Artabotrys odoratissimus inhibitory effect on mild steel (MS) corrosion in 0.5 M H₂SO₄ solution has been assessed utilizing mass loss, electrochemical potentiodynamic polarization, and impedance spectroscopy techniques. The Artabotrys odoratissimus plant has a wide range of bioactive compounds. Phytochemicals were tested for ethanolic Artabotrys odoratissimus leaves extract (AOLE) using the FeCl₃ test, Salkowaski's test, and others. Corrosion tests were conducted at varying inhibitor concentrations and temperatures. The inhibitory impact of AOLE on corrosion of MS was reported to improve with increasing concentration. Polarization experiments revealed that AOLE is a mixed kind of inhibitor and the inhibition efficacy (η_w) for MS is 93.27% for 1.25 g/L AOLE. For Electrochemical impedance spectroscopy (EIS), maximal inhibitory efficacy (η_w) was 91.62% due to AOLE adsorption on the MS surface. The obtained results using each methodology are highly consistent and closely resemble each other. The adsorption of AOLE molecules on an MS surface from the bulk of the solution causes the inhibitor's inhibition action, and the adsorption mechanism follows Langmuir adsorption isotherm. The computed $\Delta G_{ads}^o$ values ranged between ?32.919 and ?33.520 kJ mol^?1, implying a spontaneous and exothermic inhibitory action. The thermodynamic and activation parameters are often used to understand corrosion inhibition mechanisms. The comparison of corrosion product and pure extract FT-IR spectrum indicates the nature of AOLE adsorption on the MS surface. The surface morphology of MS samples was assessed using atomic force microscopy (AFM), scanning electron microscope (SEM), and contact angle techniques.     

Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline,levocetirizine and pranlukast in Sprague–Dawley rats

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay‐fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse‐phase high‐performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C₁₈ Kinetex column (250 mm × 4.6 mm × 5 μm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100–1600 ng/mL. The intra‐ and inter‐day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench‐top (8 h), after three freeze–thaw cycles, in the autosampler (8 h) and as a dry extract (?80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague–Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co‐administration of the three drugs.     

Kinetics of catalyzed esterification of acetic acid with n-butanol using carbonized agro-waste

The objective of this research work was to investigate the kinetics of esterification of acetic acid with n-butanol through the variation of experimental parameters. The reaction mixture was catalyzed heterogeneously by a sulfonated catalyst in batch mode of operation. The catalyst was prepared from abundantly available agro-waste, Cajanus cajan husk by chemical activation process, which produces a carbon-based solid catalyst with high surface area. The catalyst was characterized by a Brunauer-Emmet-Teller surface analyzer and Fourier transform infrared spectroscopy to know the surface morphology. Process parameters such as contact time, reaction temperature, and catalyst loading, which can influence the extent of conversion of reactants, were studied. Furthermore, the kinetic investigation was also carried out to estimate the kinetic parameters for uncatalyzed and catalyzed reaction using the second-order pseudo-homogeneous (P-H), Eley-Rideal (E-R), and Langmuir-Hinshelwood (LH) kinetic models for this research work. The kinetic parameters such as activation energy, preexponential factor, and the thermodynamic parameters such as enthalpy and entropy were estimated for uncatalyzed and catalyzed reactions using these three models. The process conditions were optimized for catalyzed and uncatalyzed reactions to obtain the maximum product yield by minimizing root mean square error of each experimental data using the MS-excel solver tool. Thus, this study reveals the high potential of an agro-waste, Cajanus cajan husk as raw material for the synthesis of catalyst. The results show that the E-R model is more appropriate for predicting the dynamic data of an esterification reaction, as the forward rate of reaction estimated using the E-R model are more modified than P-H and L-H models.     

Third‐order WENO scheme with a new smoothness indicator

In this article, we have devised a new reference smoothness indicator for third‐order weighted essentially non‐oscillatory (WENO) scheme to achieve desired order of convergence at critical points. In the context of the weighted essentially non‐oscillatory scheme, reference smoothness indicator is constructed in such a way that it satisfies the sufficient condition on the weights for the third‐order convergence. The goal is to construct a reference smoothness indicator such that the resulted scheme have to achieve the required order of accuracy even if the first two derivatives vanish but not the third derivative. The construction of such reference smoothness indicator is not possible through a linear combination of local smoothness indicators only. We have proposed a reference smoothness indicator to be of the fourth order of accuracy on three‐point stencil that contains the linear combination of the first derivative information of the local and global stencils. The performance enhancement of the WENO scheme through this reference smoothness indicator is verified through the standard numerical experiments. Numerical results indicate that the new scheme provides better results in comparison with the earlier third‐order WENO schemes like WENO‐JS and WENO‐Z. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis and evaluation of triphenylphosphonium conjugated 18F-labeled silica nanoparticles for PET imaging

Journal of Radioanalytical and Nuclear Chemistry - Accumulation of triphenylphosphonium (TPP) is normally observed in the mitochondria from the extracellular spaces due to the high difference in...     

Modified Pyridine-Substituted Coumarins: A New Class of Antimicrobial and Antitubercular Agents

Some new biologically potent coumarin derivatives 7a–f, 8a–f, and 9a–f bearing modified pyridine moieties (indeno[1,2-b]pyridine, 4-azaphenanthrene and benzofuro [3,2-b]pyridine) at the sixth position were designed and synthesized. All the synthesized compounds were assayed for their antimicrobial efficiency against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Salmonella typhi, Candida albicans, and Aspergillus niger. Most of the compounds showed appreciable antimicrobial activity against the tested strains. Compounds 8b, 8c, 9b, 9d, and 9f emerged as most proficient members of the series. The antitubercular activity for all the synthesized compounds was performed against Mycobacterium tuberculosis H37R_v. Compounds 8f, 9b, and 9f exhibited promising antitubercular activity. Consequently, synthesized derivatives were found to be worthy of further investigation.     

Effect of tri-n-butyl phosphate on physical properties of dodecane–nitric acid system

Extraction power of solvent depends upon the physical properties of the system. Tri-n-butyl phosphate (TBP) in dodecane is a versatile solvent used in the nuclear fuel reprocessing like PUREX process. The study of physical properties like density, viscosity, interfacial tension and solubility for TBP–nitric acid–dodecane system will be helpful in carrying out different extraction studies during PUREX process. Thus, physical properties like density, viscosity, interfacial tension and solubility have been measured for TBP–nitric acid–dodecane system using pycnometer, viscometer, pendant drop method and high performance liquid chromatography respectively. It has been observed that density and viscosity increases but interfacial tension and solubility decreases with the concentration of TBP in dodecane–nitric acid system. Physical properties of 30 % TBP–nitric acid–dodecane system have also been studied in detail. All these studies will also be useful in stripping out dissolved TBP from the nuclear waste.