Regular conjugated terpolymers comprising two different acceptors and bithiophene donor in repeating group: Effect of strong and weak acceptors on semiconducting properties

Diketopyrrolopyrrole (DPP)‐based terpolymers—P(DPP‐TPyT) and P(DPP‐T3MTT)—bearing bithiophene donating groups and weak accepting units such as pyridine (Py) or methyl thiophene‐3‐carboxylate (3MT), in the polymer backbone, were successfully synthesized. Although the two polymers had similar physical and electrochemical properties, grazing incidence X‐ray diffraction patterns of P(DPP‐TPyT) and P(DPP‐T3MTT) showed mixed and edge‐on orientations, respectively, in thermally annealed films. Accordingly, the P(DPP‐T3MTT) showed twice the hole mobility of P(DPP‐TPyT) in a thin‐film transistor, and a blended film of P(DPP‐T3MTT) and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) showed better power conversion efficiency in a polymer solar cell. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1339‐1347     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Highly enantioselective construction of tertiary thioethers and alcohols via phosphine-catalyzed asymmetric γ-addition reactions of 5H-thiazol-4-ones and 5H-oxazol-4-ones: scope and mechanistic understandings

Phosphine-catalyzed highly enantioselective γ-additions of 5H-thiazol-4-ones and 5H-oxazol-4-ones to allenoates have been developed for the first time. With the employment of amino-acid derived bifunctional phosphines, a wide range of substituted 5H-thiazol-4-one and 5H-oxazol-4-one derivatives bearing heteroatom (S or O)-containing tertiary chiral centers were constructed in high yields and excellent enantioselectivities. The reported method provides facile access to enantioenriched tertiary thioethers/alcohols. The mechanism of the γ-addition reaction was investigated by performing DFT calculations, and the hydrogen bonding interactions between the Brønsted acid moiety of the phosphine catalysts and the “CO” unit of the donor molecules were shown to be crucial in asymmetric induction.     

Monolayer Co3O4 Inverse Opals as Multifunctional Sensors for Volatile Organic Compounds

Monolayers of periodic porous Co₃O₄ inverse opal (IO) thin films for gas‐sensor applications were prepared by transferring cobalt‐solution‐dipped polystyrene (PS) monolayers onto sensor substrates and subsequent removal of the PS template by heat treatment. Monolayer Co₃O₄ IO thin films having periodic pores (d≈500 nm) showed a high response of 112.9 to 5 ppm C₂H₅OH at 200 °C with low cross‐responses to other interfering gases. Moreover, the selective detection of xylene and methyl benzenes (xylene+toluene) could be achieved simply by tuning the sensor temperature to 250 and 275 °C, respectively, so that multiple gases can be detected with a single chemiresistor. Unprecedentedly high ethanol response and temperature‐modulated control of selectivity with respect to ethanol, xylene, and methyl benzenes were attributed to the highly chemiresistive IO nanoarchitecture and to the tuned catalytic promotion of different gas‐sensing reactions, respectively. These well‐ordered porous nanostructures could have potential in the field of high‐performance gas sensors based on p‐type oxide semiconductors.     

Characteristics of polypropylene biocomposites: effect of chemical treatment to produce cellulose microparticle

Cellulose - In this study, cellulose microparticle were prepared by sulfuric acid hydrolysis, glyoxal crosslinking and acetylation followed by air classifying mill, and their properties including...     

Protein tyrosine phosphatase 1B inhibitors from a marine-derived fungal strain aspergillus sp. SF-5929

Abstract

In the course of our continuing investigation of bioactive secondary metabolites from marine-derived fungal strains, a racemate of a novel diphenolic derivative named (±)-tylopilusin D (1) along with ten previously known secondary metabolites (2–11) were isolated from a marine-derived fungal strain Aspergillus sp. SF-5929. Their structures were elucidated mainly by analysis of NMR and MS data. In addition, the inhibitory effects of the isolated compounds against protein tyrosine phosphatase 1B (PTP1B) activity were evaluated, and compounds 1, 2, and 5–7 inhibited PTP1B activity with IC₅₀ values ranging from 3.3 to 8.1?µM. Kinetics studies suggested that compounds 1, 2, and 5 had noncompetitive inhibitory effects against PTP1B.     

Enthalpic effect of polyacrylonitrile on the concentrated solutions in dimethyl sulfoxide: Strong thixotropic behavior and formation of bound solvents

The effect of dipole–dipole interaction by nitrile groups of PAN on the bound state of solvent molecules and the concentrated solution properties in DMSO was investigated. Variation of a solution viscosity exhibited three overlap concentrations, C1*, C2*, and C3*, at 2.7, 8.6, and 16.3 wt%, respectively, representing the transition of concentration regions in the order of dilute, unentangled‐semi dilute, entangled‐semi dilute, and concentrated regions. The two‐dimensional mapping of FT‐IR analysis and dielectric measurement confirmed that the intermolecular interaction of PAN was suddenly enhanced at the C*s, inducing polarization to DMSO. In the ice‐melting process of PAN solutions, two different melting peaks (T_m2 and T_m3) of DMSO newly appeared at each C2* and C3*, suggesting the different types of bound solvents. In the concentrated solutions, the saturated dielectric constant and the strongly delayed evaporation of the solvent even at the boiling point of DMSO along with strong thixotropic behavior were indicative of the stronger confinement state of bound DMSO than in the semidilute solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1080–1089     

Synthesis of Moracin C and Its Derivatives with a 2-arylbenzofuran Motif and Evaluation of Their PCSK9 Inhibitory Effects in HepG2 Cells

Proprotein convertase subtilisin/kexin type 9 (PCSK9) is a key factor in several cardiovascular diseases, as it is responsible for the elevation of circulating low-density lipoprotein cholesterol (LDL-C) levels in blood plasma by direct interaction with the LDL receptor. The development of orally available drugs to inhibit this PCSK9-LDLR interaction is a highly desirable objective. Here, we report the synthesis of naturally occurring moracin compounds and their derivatives with a 2-arylbenzofuran motif to inhibit PCSK9 expression. In addition, we discuss a short approach involving the three-step synthesis of moracin C and a divergent method to obtain various analogs from one starting material. Among the tested derivatives, compound 7 (97.1%) was identified as a more potent inhibitor of PCSK9 expression in HepG2 cells than berberine (60.9%). These results provide a better understanding of the structure–activity relationships of moracin derivatives for the inhibition of PCSK9 expression in human hepatocytes.     

Nonlinear frequency response analysis: a recent review and perspectives

The nonlinear frequency response analysis (NFRA) can be seen as an extension of electrochemical impedance spectroscopy. NFRA gives a full and detailed representation of the system response and can establish a connection between model parameters and the experimentally observed phenomena. In this article, different theoretical NFRA approaches and the most recent application examples are discussed. A simple electrochemical example is used to showcase the benefits and disadvantages of analyzing the system response by using different approaches. In addition, it was shown how to extract experimental harmonic values and analyze them.