Conjugated random terpolymers based on benzodithiophene,diketopyrrolopyrrole, and 8,10‐bis(thiophen‐2‐yl)‐2,5‐di(nonadecan‐3‐yl)bis[1,3]thiazolo[4,5‐f:5′,4′‐h]thieno[3,4‐b]quinoxaline for Efficient Polymer Solar Cell

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from ?5.23 to ?5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC₇₁BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485     

Synthesis,characterization, and application to polymer solar cells of polythiophene derivatives with ester‐ or ketone‐substituted phenyl side groups

Four polythiophene derivatives including regiorandom polymers P1 , P2 , and P3 and a regioregular polymer P4 , containing a phenyl side chain with electron‐withdrawing carbonyl groups such as an ester and a ketone at the 3‐position of the thiophene ring, were synthesized by Stille coupling reaction. Bulk‐heterojunction polymer solar cells (PSCs) based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) were fabricated, and their photovoltaic performances were evaluated for the first time. The PSC devices based on the regioregular polymer P4 :PCBM = 1:2 (w/w) exhibited a high‐open‐circuit voltage (V_oc) of 0.943 V because of the low‐lying highest occupied molecular orbit energy level of P4 . The short π–π stacking distance (0.355 nm) in the parallel direction to the substrate and “face‐on” rich orientation were observed by the grazing incidence wide‐angle X‐ray scattering experiment, which might reflect higher J_sc and FF values of the P4 :[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) PSC device than others. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 875–887     

Donor–acceptor photovoltaic polymers based on 1,4‐dithienyl‐2,5‐dialkoxybenzene with intramolecular noncovalent interactions

Donor–acceptor (D–A) conjugated polymers bearing non‐covalent configurationally locked backbones have a high potential to be good photovoltaic materials. Since 1,4‐dithienyl‐2,5‐dialkoxybenzene ( TBT ) is a typical moiety possessing intramolecular S…O interactions and thus a restricted planar configuration, it was used in this work as an electron‐donating unit to combine with the following electron‐accepting units: 3‐fluorothieno[3,4‐b]thiophene ( TFT ), thieno‐[3,4‐c]pyrrole‐4,6‐dione ( TPD ), and diketopyrrolopyrrole ( DPP ) for the construction of such D–A conjugated polymers. Therefore, the so‐designed three polymers, PTBTTFT , PTBTTPD , and PTBTDPP , were synthesized and investigated on their basic optoelectronic properties in detail. Moreover, using [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as acceptor material, polymer solar cells (PSCs) were fabricated for studying photovoltaic performances of these polymers. It was found that the optimized PTBTTPD cell gave the best performance with a power conversion efficiency (PCE) of 4.49%, while that of PTBTTFT displayed the poorest one (PCE = 1.96%). The good photovoltaic behaviors of PTBTTPD come from its lowest‐lying energy level of the highest occupied molecular orbital (HOMO) among the three polymers, and good hole mobility and favorable morphology for its PC₇₁BM‐blended film. Although PTBTDPP displayed the widest absorption spectrum, the largest hole mobility, and regular chain packing structure when blended with PC₇₁BM, its unmatched HOMO energy level and disfavored blend film morphology finally limited its solar cell performance to a moderate level (PCE: 3.91%). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 689–698     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677     

Synthesis and characterization of novel low‐bandgap triphenylamine‐based conjugated polymers with main‐chain donors and pendent acceptors for organic photovoltaics

A series of novel low‐bandgap triphenylamine‐based conjugated polymers ( PCAZCN , PPTZCN , and PDTPCN ) consisting of different electron‐rich donor main chains (N‐alkyl‐2,7‐carbazole, phenothiazine, and cyclopentadithinopyrol, respectively) as well as cyano‐ and dicyano‐vinyl electron‐acceptor pendants were synthesized and developed for polymer solar cell applications. The polymers covered broad absorption spectra of 400–800 nm with narrow optical bandgaps ranging 1.66–1.72 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the polymers measured by cyclic voltammetry were found in the range of ?5.12 to ?5.32 V and ?3.45 to ?3.55 eV, respectively. Under 100 mW/cm² of AM 1.5 white‐light illumination, bulk heterojunction photovoltaic devices composing of an active layer of electron‐donor polymers ( PCAZCN , PPTZCN , and PDTPCN ) blended with electron‐acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) in different weight ratios were investigated. The photovoltaic device containing donor PCAZCN and acceptor PC₇₁BM in 1:2 weight ratio showed the highest power conversion efficiency of 1.28%, with V_oc = 0.81 V, J_sc = 4.93 mA/cm², and fill factor = 32.1%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Control of vertical distribution of thiophene‐based copolymers containing 4,7‐Dithien‐2‐yl‐benzo[C][1,2,5]thiadiazole and 3,6‐Dithien‐2‐yl‐pyrrolo[3,4‐C]pyrrole‐1,4(2H,5H)‐dione as Side Groups for Photovoltaics

Four new D—A type copolymers with 2D‐conjugated side‐chain identified PfToBT, PbToBT, PfTDPP and PbTDPP, containing two acceptors 4,7‐dithien‐2‐yl‐benzo[c][1,2,5]thiadiazole (DTBT), and diketopyrrolopyrrole (DPP) linked by thiophene donors, are obtained using Pd‐catalyzed Stille‐coupling reaction. These polymers show a broad visible‐near‐infrared absorption band (E_g = 1.79–1.66 eV) and possess a relatively low‐lying HOMO level at ?5.34 to ?5.12 eV. All the polymer:PC₇₀BM blend films showed edge‐on structure and have similar d_π‐spacing values. According to the structure of conjugated side‐chain, the vertical distributions of polymer chains and PC₇₀BM within the BHJ (bulk heterojunction) were different. When DPP used as an acceptor, conjugated side chains of the polymer coexisted with PC₇₀BM in same position. The BHJ film prepared from PfToBT, PbToBT had a discontinuous network between polymer and PC₇₀BM, whereas films from PfTDPP and PbTDPP formed continuous and evenly distributed network between them. This optimized vertical morphology promotes hole transport along respective pathways of polymers and fullerenes in the vertical direction, leading to high J_SC. PbTDPP shows PCE up to 2.9% (Jsc of 9.4 mA/cm², Voc of 0.68 V, and FF of 0.44). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2746–2759     

High‐performance amorphous donor–acceptor conjugated polymers containing x‐shaped anthracene‐based monomer and 2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing amorphous conjugated polymers, such as poly(3‐(5‐((9,10‐bis((4‐hexylphenyl)ethynyl)‐6‐(prop‐1‐ynyl)anthracen‐2‐yl)ethynyl) thiophen‐2‐yl)‐5‐(2‐hexyldecyl)‐2‐(2‐octyldodecyl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 4 ), and poly(3‐(5‐((2,6‐bis((4‐hexylphenyl)ethynyl)‐10‐(prop‐1‐ynyl)anthracen‐9‐yl)ethynyl)thiophen‐2‐yl)‐2,5‐bis(2‐octyldodecyl)‐6‐(thio phen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 7 ), were successfully synthesized via Sonogashira coupling reactions under microwave conditions. Copolymer 7 , incorporating a DPP moiety at the 9,10‐position of the anthracene ring through a triple bond, showed a much lower bandgap energy (E_g = 1.81 eV) than copolymer 4 (E_g = 2.13 eV). Tuning of the molecular frontier orbital energies was achieved by only changing the anchoring position of dithiophenyl‐DPP from the 2,6‐ to the 9,10‐position in the anthracene ring. Because of the donor–acceptor (D–A) interaction and the two‐dimensional planar structure of the X‐shaped donor monomer, the resulting polymers showed good interchain π?π stacking in the thin‐film state, despite being amorphous polymers. When the newly synthesized polymer 7 was used as a semiconductor material in an organic thin‐film transistor, the best mobility of up to 0.12 cm² V^?1 s^?1 (I_on/off = ～ 4.4 × 10⁶) was observed, which is one of the highest values recorded for amorphous polymer films reported to date. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Modulation of electronic properties of π‐conjugated copolymers derived from naphtho[1,2‐b:5,6‐b′]dithiophene donor unit: A structure‐property relationship study

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT , PTNDTT‐BTz , and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene ( NDT ) as the donor and 2,2′‐bithiazole ( BTz ), benzo[1,2,5]thiadiazole ( BT ), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione ( DPP ), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between ?5.14 to ?5.26 eV and ?3.13 to ?3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10^?3 to 7.9 × 10^?5 cm² V^?1 s^?1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958     

Side chain engineering of naphthalene diimide–bithiophene‐based polymer acceptors in all‐polymer solar cells

Two novel polymeric acceptors based on naphthalene diimide (NDI) and 2.2′‐bithiophene, named as P(NDI2THD‐T2) and P(NDI2TOD‐T2), were designed and synthesized for all polymer solar cells application. The structural and electronic properties of the two acceptors were modulated through side‐chain engineering of the NDI units. The optoelectronic properties of the polymers and the morphologies of the blend films composed of the polymer acceptors and a donor polymer PTB7‐Th were systemically investigated. With thiophene groups introduced into the side chains of the NDI units, both polymers showed wider absorption from 350 nm to 900 nm, compared with the reference polymer acceptor of N2200. No redshift of absorption spectra from solutions to films indicated reduced aggregation of the polymers due to the steric hindrance effect of thiophene rings in the side chains. The photovoltaic performance were characterized for devices in a configuration of ITO/PEDOT:PSS/PTB7‐Th:acceptors/2,9‐bis(3‐(dimethylamino)propyl)anthra[2,1,9‐def:6,5,10‐def]diisoquinoline‐1,3,8,10(2H,9H)‐tetraone (PDIN)/Al. With the addition of diphenyl ether as an additive, the power conversion efficiencies (PCEs) of 2.73% and 4.75% for P(NDI2THD‐T2) and P(NDI2TOD‐T2) based devices were achieved, respectively. The latter showed improved J_sc, Fill Factor (FF), and PCE compared with N2200 based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3679–3689     

Quinoxaline‐based D‐A conjugated polymers for organic solar cells: Probing the effect of quinoxaline side chains and fluorine substitution on the power conversion efficiency

We describe the successful synthesis of four novel donor‐acceptor (D‐A) type copolymers, referred to as PQxBT , PQxFBT , TQxBT , and TQxFBT . The effects of using a fluorinated bithiophene (FBT) and varying the side‐chain moieties tethered to the quinoxaline (Qx) unit (electron‐withdrawing group in the polymer backbone) on the physical properties and photovoltaic performance were investigated. Specifically, the four polymers were synthesized using either alkoxyphenyl (P) or alkylthiophene (T) units anchored to the quinoxaline in the polymer backbone. The FBT‐bearing polymers, PQxFBT and TQxFBT , displayed more redshifted absorption spectra and higher crystallinity owing to the greater planarity of their polymer backbone as compared to the non‐fluorinated polymers. The TQxFBT copolymer, equipped with both the alkylthiophene side chains and FBT, exhibited face‐on orientation in film state and a well‐mixed nanophase morphology in TQxFBT :PC₇₁BM blend films. The photovoltaic device fabricated from TQxFBT :PC₇₁BM exhibited the highest power conversion efficiency of 4.18%. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1209–1218     

Exploring the influence of acceptor content on semi‐random conjugated polymers

A family of diketopyrrolopyrrole (DPP)‐incorporated P3HT based semi‐random copolymers was synthesized and their optical, electronic and photovoltaic properties were investigated. For the first time, the influence of acceptor content on semi‐random copolymers was explored in the broad range of 10–40% acceptor. A mixture of DPP acceptor units with different side chains (ethylhexyl and decyltetradecyl) was incorporated into each copolymer to improve solubility and film quality. Increased DPP content in the polymer backbone resulted in broadened absorption between 350 and 900 nm, resulting in a monotonic decrease in optical band gap (E_g) of the polymers from 1.49 to 1.37 eV. Highest occupied molecular orbital (HOMO) energy levels showed an increase from 10% DPP to 20–30% DPP, while decreasing for 40% DPP. V_oc values followed a consistent trend with HOMO energy levels. Semi‐random copolymers showed significantly improved photovoltaic properties compared with P3HT. Bulk heterojunction solar cells fabricated from the semi‐random copolymers blended with PC₆₁BM exhibited high short‐circuit current densities (J_sc) up to 10.29 mA/cm² and efficiencies up to 4.43%. A new method of methanol treatment was developed and applied to the semi‐random copolymers resulting in high fill factors approaching 0.70 under ambient conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3884–3892     

Silole‐containing polymers for high‐efficiency polymer solar cells

Silole‐containing conjugated polymers ( P1 and P2 ) carrying methyl and octyl substituents, respectively, on the silicon atom were synthesized by Suzuki polycondensation. They show strong absorption in the region of 300–700 nm with a band gap of about 1.9 eV. The two silole‐containing conjugated polymers were used to fabricate polymer solar cells by blending with PC₆₁BM and PC₇₁BM as the active layer. The best performance of photovoltaic devices based on P1 /PC₇₁BM active layer exhibited power conversion efficiency (PCE) of 2.72%, whereas that of the photovoltaic cells fabricated with P2 /PC₇₁BM exhibited PCE of 5.08%. 1,8‐Diiodooctane was used as an additive to adjust the morphology of the active layer during the device optimization. PCE of devices based on P2 /PC₇₁BM was further improved to 6.05% when a TiO_x layer was used as a hole‐blocking layer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of phenanthro[1,10,9,8‐cdefg]carbazole‐based conjugated polymers for organic solar cell applications

Low bandgap polymers with dithienylquinoxaline moieties based on 6H‐phenanthro[1,10,9,8‐cdefg]carbazole were synthesized via the Suzuki coupling reaction. Alkoxy groups were substituted at two different positions on the phenyl groups of the quinoxaline units of these polymers: in the para‐position (PPQP) and in the meta‐position (PPQM). The two polymers showed similar physical properties: broad absorption in the range of 400–700 nm, optical bandgaps of ～1.8 eV, and the appropriate frontier orbital energy levels for efficient charge transfer/separation at polymer/PC₇₁BM interfaces. However, the PPQM solar cell achieved a higher PCE due to its higher J_sc. Our investigation of the morphologies of the polymer:PC₇₁BM blend films and theoretical calculations of the molecular conformations of the polymer chains showed that the polymer with the meta‐positioned alkoxy group has better miscibility with PC₇₁BM than the polymer with the para‐positioned alkoxy group because the dihedral angle of its phenyl group with respect to the quinoxaline unit is higher. This higher miscibility resulted in a polymer:PC₇₁BM blend film with a better morphology and thus in a higher PCE. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 796–803     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

Narrow band gap D–A copolymer of indacenodithiophene and diketopyrrolopyrrole with deep HOMO level: Synthesis and application in field‐effect transistors and polymer solar cells

A novel fused ladder alternating D–A copolymer, PIDT–DPP, with alkyl substituted indacenodithiophene (IDT) as donor unit and diketopyrrolopyrrole (DPP) as acceptor unit, was designed and synthesized by Pd‐catalyzed Stille‐coupling method. The copolymer showed good solubility and film‐forming ability combining with good thermal stability. PIDT–DPP exhibited a broad absorption band from 350 to 900 nm with an absorption peak centered at 735 nm. The optical band gap determined from the onset of absorption of the polymer film was 1.37 eV. The highest occupied molecular orbital level of the polymer is as deep as ?5.32 eV. The solution‐processed organic field‐effect transistor (OFETs) was fabricated with bottom gate/top contact geometry. The highest FET hole mobility of PIDT–DPP reached 0.065 cm² V^?1 s^?1 with an on/off ratio of 4.6 × 10⁵. This mobility is one of the highest values for narrow band gap conjugated polymers. The power conversion efficiency of the polymer solar cell based on the polymer as donor was 1.76% with a high open circuit voltage of 0.88 V. To the best of our knowledge, this is the first report on the photovoltaic properties of alkyl substituted IDT‐based polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thiazolothiazole‐containing polythiophenes with low HOMO level and high hole mobility for polymer solar cells

Two regiochemically defined polythiophenes containing thiazolothiazole acceptor unit were synthesized by palladium(0)‐catalyzed Stille coupling reaction. The thermal, electrochemical, optical, charge transport, and photovoltaic properties of these copolymers were examined. Compared to P1 with head‐to‐head coupling of two middle thiophenes, P2 with head‐to‐tail coupling of two middle thiophenes exhibits 40 nm red shift of absorption spectrum in film and 0.3 eV higher HOMO level. Both polymers exhibit field‐effect hole mobility as high as 0.02 cm² V^?1 s^?1. Polymer solar cells (PSCs) were fabricated based on the blend of the polymers and methanofullerene[6,6]‐phenyl C71‐butyric acid methyl ester (PC₇₁BM). The PSC based on P1 :PC₇₁BM (1:2, w/w) exhibits a power conversion efficiency of 2.7% under AM 1.5, 100 mW cm^?2, two times of that based on P2 :PC₇₁BM. The higher efficiency is attributed to lower HOMO (?5.6 eV) and smaller phase separation scale in P1 :PC₇₁BM blend. Tiny change in thiophene connection of P1 and P2 lead to great difference in HOMO, phase separation scale, and efficiency of their photovoltaic devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A New D–A conjugated polymer P(PTQD‐BDT) with PTQD acceptor and BDT donor units for BHJ polymer solar cells application

A novel donor–acceptor ( D–A ) copolymer comprising of weak electron donating BDT moiety and strong 9‐(2‐octyldodecyl)?8H‐pyrrolo[3,4‐b] bisthieno[2,3‐f:3',2'‐h] quinoxaline‐8,10(9H)‐dione (PTQD) unit denoted as P(PTQD‐BDT) was synthesized as donor material for polymer solar cells. P(PTQD‐BDT) shows a broad visible‐near‐infrared absorption band with an optical bandgap of 1.74 eV and possesses a relatively low‐lying HOMO level at ?5.28 eV. Bulk‐heterojunction polymer solar cell with the optimized blend of 1:2 (weight ratio) P(PTQD‐BDT):PC₇₁BM (processed with chloroform) shows an open circuit voltage of 0.92 V, a short circuit current density of 7.84 mA/cm², and a fill factor of 0.50, achieving a power conversion efficiency (PCE) of 3.61%. The PCE has been further improved to 5.55 % (J_sc = 10.34 mA/cm², V_oc = 0.88V and FF = 0.61), when 3% v ol 1,8‐diio‐dooctane (DIO) was used as solvent additive for the processing of P(PTQD‐BDT):PC₇₁BM blended film. The enhancement in J_sc is as a result of the appropriate morphology and efficient exciton dissociation into free charge carrier. The increase in PCE has been attributed to the favorable nanoscale morphology for efficient exciton dissociation and charge transport (reduction in the electron to hole mobility ratio). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2390–2398     

Design and synthesis of dithieno[3,2‐b:2′3′‐d]pyrrole‐based conjugated polymers for photovoltaic applications: consensus between low bandgap and low HOMO energy level

A strategy of the fine‐tuning of the degree of intrachain charge transfer and aromaticity of polymer backbone was adopted to design and synthesize new polymers applicable in photovoltaics. Three conjugated polymers P1 , P2 , and P3 were synthesized by alternating the electron‐donating dithieno[3,2‐b:2′3′‐d]pyrrole (D) and three different electron‐accepting (A) segments ( P1 : N‐(2‐ethylhexyl)phthalimide; P2 : 1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole; and P3 : thiophene‐3‐hexyl formate) in the polymer main chain. Among the three polymers, P2 possessed the broadest absorption band ranging from 300 to 760 nm, the lowest bandgap (1.63 eV), and enough low HOMO energy level (?5.27 eV) because of the strong intrachain charge transfer from D to A units and the appropriate extent of quinoid state in the main chain of P2 , which was convinced by the theoretical simulation of molecular geometry and front orbits. Photovoltaic study of solar cells based on the blends of P1 – P3 and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) demonstrated that P2 :PCBM exhibited the best performance: a power conversion efficiency of 1.22% with a high open‐circuit voltage (V_OC) of 0.70 V and a large short‐circuit current (I_SC) of 5.02 mA/cm² were achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Melamine driven supramolecular self‐assembly of nucleobase derivatives in water

Water‐soluble supramolecular polymers, especially made up of biomolecules, are ideally suited to build new biomaterials that can mimic or interact with dynamic, biological environments. Here, two derivatives from thymine (T), that is N‐[2‐(3,4‐Dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidinyl)acetyl]‐L‐phenylalanine (T‐phe) and N‐(2‐Aminoethyl)‐3,4‐dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidineacetamide (T‐NH₂) were synthesized. Then the optimal condition for self‐assembly of T‐phe and T‐NH₂ driven by melamine (M) was explored. It was observed that M/T kept at 1:3 with equivalent T‐phe and T‐NH₂ under neutral environment resulted in long fibers (>1 μm) with extremely high aspect ratios, which suggested that electrostatic and π‐stacking interactions could be effectively orchestrated by hydrogen bonds to direct the hierarchical assembly. Furthermore, hydrogels were spontaneously generated with a concentrated solution of T‐phe, T‐NH₂, and M due to the fibril entanglement. Given its biomimetic nature and efficient self‐assembly process, this newly developed supramolecular polymer stacked by tetrameric structures represented an innovative concept and pathway for novel bio‐inspired materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 789–796     

Synthesis and characterization of cyclic P3HT as a donor polymer for organic solar cells

In this study, cyclic poly(3‐hexylthiophene‐2,5‐diyl) (c‐P3HT) with a controlled M_n was synthesized by the intramolecular cyclization of α‐bromo‐ω‐ethynyl‐functionalized P3HT via the Sonogashira coupling reaction. The effect of the cyclic structure, which does not have terminal groups of polymers, on the photoelectric conversion characteristics was investigated in comparison to linear P3HT (l‐P3HT). c‐P3HT was successfully synthesized with M_n ≈ 17,000, dispersity ≈ 1.2, and regioregularity ≈ 99%. The hole mobility was determined to be 5.1 × 10^?4 cm² V^?1 s^?1 by time‐of‐flight (TOF) experiment. This was comparable to that of l‐P3HT of 5.6 × 10^?4 cm² V^?1 s^?1. Organic solar cell systems were fabricated with each polymer by blending them with [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM). The l‐P3HT:PC₇₁BM system showed a dispersive TOF photocurrent profile for electron transport, whereas a nondispersive profile was observed for c‐P3HT:PC₇₁BM. In addition, an amount of collected electrons in c‐P3HT:PC₇₁BM was greater than that in l‐P3HT:PC₇₁BM for TOF experiments. The photoelectric conversion characteristics were improved by using c‐P3HT rather than l‐P3HT (power conversion efficiency [PCE] = 4.05% vs 3.23%), reflecting the nondispersive transport and the improvement of electron collection. PCEs will be much improved by applying this cyclic concept to highly‐efficient OSC polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 266–271