Synthesis of Some Novel Heterocyclic Xylidinyl Amines and Carboxamides

The xylidines 1a , 1b undergo condensation with ethyl cyanoacetate 2 and ethyl benzoyl acetate 15 to afford the cyano acetanilides 3a , 3b and the β‐diketones 16a , 16b , respectively. Compounds 3a , 3b react with hydrazine and phenyl hydrazine to afford the azine‐bis derivatives 5a , 5b and 7a , 7b , whereas 16a , 16b react with the same reagents to afford the pyrazolyl amine derivatives 17a , 17b and 18a , 18b , respectively. Compounds 3a , 3b react also with dimethylformamide dimethylacetal to afford the enaminonitriles 8a , 8b , whereas 16a , 16b react with the same reagent to afford only the enaminone 19b . The enaminonitriles 8a , 8b react with hydrazine and phenyl hydrazine to afford also the azine‐bis derivatives 11a , 11b and 14a , 14b , respectively.     

Two validated chromatographic determinations of an antifungal drug,its toxic impurities and degradation product: A comparative study

Tolnaftate, a thionoester anti‐fungal drug, was subjected to alkaline hydrolysis to produce methyl(m‐tolyl)carbamic acid and β ‐naphthol (tolnaftate impurity A). N‐Methyl‐m‐toluidine, tolnaftate impurity D, was synthesized and structurally elucidated along with tolnaftate alkaline degradation products using IR, H¹NMR and MS. Two stability‐indicating HPTLC and RP‐HPLC methods were developed and validated, for the first time, for determination of tolnaftate, its alkaline degradation products and toxic impurities in the presence of methyl paraben, as a preservative in Tinea Cure^® cream. The proposed HPTLC method depended on separation of the studied components on TLC silica gel F₂₅₄ plates using hexane–glacial acetic acid (8:2, v/v) as a developing system and scanning wavelength of 230 nm. The proposed RP‐HPLC method was based on separation of the five components on an Eclipse plus C₁₈ column. The mobile phase used was acetonitrile–water containing 1% ammonium formate (40:60, v/v), with a flow rate of 1 mL/min and detection wavelength of 230 nm. The proposed methods allowed the assay of tolnaftate toxic impurities, β ‐naphthol and N‐methyl‐m‐toluidine, down to 2%, allowing tracing of β ‐naphthol that could be absorbed by the skin causing systemic toxic effects, unlike tolnaftate, indicating the high significance of such determination. International Conference on Harmonization guidelines were followed for validation.     

Solitary wave solutions for some nonlinear time-fractional partial differential equations

In this paper, we have studied the hybrid projective synchronisation for incommensurate, integer and commensurate fractional-order financial systems with unknown disturbance. To tackle the problem of unknown bounded disturbance, fractional-order disturbance observer is designed to approximate the unknown disturbance. Further, we have introduced simple sliding mode surface and designed adaptive sliding mode controllers incorporating with the designed fractional-order disturbance observer to achieve a bounded hybrid projective synchronisation between two identical fractional-order financial model with different initial conditions. It is shown that the slave system with disturbance can be synchronised with the projection of the master system generated through state transformation. Simulation results are presented to ensure the validity and effectiveness of the proposed sliding mode control scheme in the presence of external bounded unknown disturbance. Also, synchronisation error for commensurate, integer and incommensurate fractional-order financial systems is studied in numerical simulation.     

Comprehensive Metabolite Profiling in Genetic Resources of Garlic (Allium sativum L.) Collected from Different Geographical Regions

Garlic (Allium sativum) is the second most important Allium crop that has been used as a vegetable and condiment from ancient times due to its characteristic flavor and taste. Although garlic is a sterile plant that reproduces vegetatively through cloves, garlic shows high biodiversity, as well as phenotypic plasticity and environmental adaptation capacity. To determine the possible mechanism underlying this phenomenon and to provide new genetic materials for the development of a novel garlic cultivar with useful agronomic traits, the metabolic profiles in the leaf tissue of 30 garlic accessions collected from different geographical regions, with a special focus on the Asian region, were investigated using LC/MS. In addition, the total saponin and fructan contents in the roots and cloves of the investigated garlic accessions were also evaluated. Total saponin and fructan contents did not separate the garlic accessions based on their geographical origin, implying that saponin and fructan contents were clone-specific and agroclimatic changes have affected the quantitative and qualitative levels of saponins in garlic over a long history of cultivation. Principal component analysis (PCA) and dendrogram clustering of the LC/MS-based metabolite profiling showed two major clusters. Specifically, many Japanese and Central Asia accessions were grouped in cluster I and showed high accumulations of flavonol glucosides, alliin, and methiin. On the other hand, garlic accessions grouped in cluster II exhibited a high accumulation of anthocyanin glucosides and amino acids. Although most of the accessions were not separated based on country of origin, the Central Asia accessions were clustered in one group, implying that these accessions exhibited distinct metabolic profiles. The present study provides useful information that can be used for germplasm selection and the development of new garlic varieties with beneficial biotic and abiotic stress-adaptive traits.     

Chromatographic determination of sulfasalazine and its active metabolites: greenness assessment and application to spiked human plasma

Green TLC-densitometric and RP-HPLC methods were developed and validated for the determination of the active prodrug sulfasalazine (SZ), its active metabolite mesalazine (MZ) and the major active metabolite of mesalazine, N-acetyl-5-aminosalicylic acid (AS). In the developed TLC-densitometric method, chromatographic separation was carried out on TLC silica gel plates 60 F₂₅₄ using a developing system consisting of ethyl acetate–methanol–ammonia solution 33% (8:2.5:0.3, by volume) and then scanning the separated bands at 215 nm using hydrochlorothiazide as an internal standard with linearity ranges of 0.4–3, 0.4–2.4 and 0.3–2 for SZ, MZ and AS, respectively. The developed RP-HPLC method depended on chromatographic separation using a C₁₈ column with a solvent mixture of methanol–aqueous acetic acid solution (pH 5) as a mobile phase with gradient elution mode and UV scanning at 243 nm using pyrazinamide as internal standard with linearity ranges of 5–50, 5–40, and 3–20 for SZ, MZ and AS, respectively. US Food and Drug Administration guidelines were followed during validation of the methods. The greenness of the developed methods was estimated using the greenness profile and the Eco-Scale approach. Both methods passed the four quadrants of the greenness profile and had Eco-Scale score ˃75, thus they were considered to be green according to these approaches.     

Development and Validation of High-Throughput Bioanalytical Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method for the Quantification of Newly Synthesized Antitumor Carbonic Anhydrase Inhibitors in Human Plasma

In the present study, a sensitive and fully validated bioanalytical high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been developed for the quantitative determination of three newly synthesized carbonic anhydrases inhibitors (CAIs) with potential antitumor activity in human plasma. The analytes and the internal standard (IS) were extracted using 1.5 mL acetonitrile from only 450 µL aliquots of human plasma to achieve the desired protein precipitation. Chromatographic separations were achieved on Phenomenex Kinetex^® C₁₈ column (100 × 4.6 mm, 2.6 µm) using a binary gradient elution mode with a run time of less than 6 min. The mobile phase consisted of solvent (A): 0.1% formic acid in 50% methanol and solvent B: 0.1% formic acid in acetonitrile (30:70, v/v), pumped at a flow rate of 0.8 mL/min. Detection was employed using triple quadrupole tandem mass spectrometer (API 3500) equipped with an electrospray ionization (ESI) source in the positive ion mode. Multiple reaction monitoring (MRM) mode was selected for quantitation through monitoring the precursor-to-parent ion transition at m/z 291.9 → 173.0, m/z 396.9 → 225.1, m/z 388.9 → 217.0, and m/z 146.9 → 91.0 for AW-9a, WES-1, WES-2, and Coumarin (IS), respectively. Linearity was computed using the weighted least-squares linear regression method (1/x²) over a concentration range of 1–1000, 2.5–800, and 5–500 ng/mL for AW-9a, WES-1, and WES-2; respectively. The bioanalytical LC-MS/MS method was fully validated as per U.S. Food and Drug Administration (FDA) guidelines with all respect to linearity, accuracy, precision, carry-over, selectivity, dilution integrity, and stability. The proposed LC-MS/MS method was applied successfully for the determination of all investigated drugs in spiked human plasma with no significant matrix effect, which is a crucial cornerstone in further therapeutic drug monitoring of newly developed therapeutic agents.     

Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7. This has been used to evaluate the extraction characteristics (accel-decel system) to generate an ion beam with low beam emittance and high brightness. The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target. Also, a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

Surface Functionalization Methods to Enhance Bioconjugation in Metal-Labeled Polystyrene Particles

Lanthanide-encoded polystyrene particles synthesized by dispersion polymerization are excellent candidates for mass cytometry based immunoassays, however they have previously lacked the ability to conjugate biomolecules to the particle surface. We present here three approaches to post-functionalize these particles, enabling the covalent attachment of proteins. Our first approach used partially hydrolyzed poly(N-vinylpyrrolidone) as a dispersion polymerization stabilizer to synthesize particles with high concentration of -COOH groups on the particle surface. In an alternative strategy to provide -COOH functionality to the lanthanide-encoded particles, we employed seeded emulsion polymerization to graft poly(methacrylic acid) (PMAA) chains onto the surface of these particles. However, these two approaches gave little to no improvement in the extent of bioconjugation. In our third approach, seeded emulsion polymerization was subsequently used as a method to grow a functional polymer shell (in this case, poly(glycidyl methacrylate) (PGMA)) onto the surface of these particles, which proved highly successful. The epoxide-rich PGMA shell permitted extensive surface bioconjugation of NeutrAvidin, as probed by an Lu-labeled biotin reporter (ca. 7 × 10(5) binding events per particle with a very low amount of non-specific binding) and analyzed by mass cytometry. It was shown that coupling agents such as EDC were not needed, such was the reactivity of the particle surface. These particles were stable and the addition of a polymeric shell was shown did not affect the narrow lanthanide ion distribution within the particle interior as analyzed by mass cytometry. These particles represent the most promising candidates for the development of a highly multiplexed bioassay based on lanthanide-labeled particles to date.     

Effect of boron and nitrogen co-doping on CNT's electrical properties: Density functional theory

In this work, we have theoretically studied the changes in electrical properties of three different geometrical structures of carbon nanotubes upon co-doping them with boron and nitrogen atoms. We applied different doping mechanisms to study band structure variations in the doped structures. Doping carbon nanotubes with different atoms will create new band levels in the band structure and as a consequence, a shift in the Fermi level occurs. Whereas, filling up the lowest conduction/ upper valence bands created an up/ downshift in the Fermi level. Moreover, dopants concentration and dopants position play a critical rule in defining the number of new band levels. These new band levels in the band gap region represented as new peaks appeared in the density of states. These new bands are solely attributed to co-doping carbon nanotubes with boron and nitrogen atoms.