电子直线加速器X射线转换靶设计

设计了用于BF-5电子直线加速器的X射线转换靶。采用蒙特卡罗模拟程序优化计算了靶材厚度;设计了转换靶的冷却结构,并采用有限元方法模拟计算了水冷效果;依据设计的结构参数,计算了转换靶产生X射线的剂量分布及能谱分布。结果表明:靶体温度控制在40 ℃以下,转换靶在该条件下能够长期稳定工作; X射线平均能量为0.65 MeV,在转换靶正前方1 m处吸收剂量可达6 Gy/min。     

Non-ionizing energy loss calculations for modeling electron-induced degradation of Cu(In,Ga)Se_2 thin-film solar cells

The lowest energies which make Cu,In,Ga,and Se atoms composing Cu(In,Ga)Se_2(CIGS) material displaced from their lattice sites are evaluated,respectively.The non-ionizing energy loss(NIEL) for electron in CIGS material is calculated analytically using the Mott differential cross section.The relation of the introduction rate(k) of the recombination centers to NIEL is modified,then the values of k at different electron energies are calculated.Degradation modeling of CIGS thin-film solar cells irradiated with various-energy electrons is performed according to the characterization of solar cells and the recombination centers.The validity of the modeling approach is verified by comparison with the experimental data.     

基于蒙特卡罗方法的NaI探测器效率刻度及其测量轫致辐射实验

为了将NaI探测器更好地应用到轫致辐射谱测量工作中,对一套NaI探测器做了研究:利用~(137)Cs,~(60)Co等同位素γ源,结合蒙特卡罗方法,得到全能峰效率的模拟值与实验测量值符合得较好;利用蒙特卡罗N粒子编码模拟NaI对不同能量光子的响应,得到了该探测器对光子的能量响应,并将获得的能量响应用于轫致辐射的解谱工作,解谱结果与原始谱符合得很好;将该探测器应用到强流电子束打靶轫致辐射测量实验中,对轫致辐射在NaI探测器中的响应做了初步测量.     

Reconstruction of a 6-MeV bremsstrahlung spectrum by multi-layer absorption based on LiF:Mg,Cu, P

In this paper, TLD （LiF： Mg, Cu, P） is used as detector. A multi-layer absorption （MLA） model is designed. Combined with Monte-Carlo processes, a bremsstrahlung X-ray spectrum is reconstructed by an iterative method; the reconstructed results agree with the results of simulations by the MCNP process essentially, especially in middle energy region.     

MC模拟无卷积全谱转换法测量X，γ辐射剂量

为了更好地进行环境X/γ辐射剂量的测量,通过对电制冷高纯锗探测器蒙特卡罗建模获取0.01～1.5 MeV能量范围内的能谱和剂量（率）值,并利用无卷积全谱转换法进行能谱-剂量转换研究。研究发现,通过无卷积全谱转换法计算得到的剂量率与模拟剂量率符合较好;通过在中国计量研究院环境γ辐射空气吸收剂量标准辐射场中进行Co-60和Cs-137放射源剂量率实验验证,结果显示,在0.01～1.5 MeV的能量范围内,通过能谱-剂量转换得到剂量率与标准剂量率的误差小于±10%,这表明通过无卷积全谱转换法进行能谱-剂量（率）转换系数的求解是可行的。