可调脉冲宽度的调Q掺铥双包层光纤激光器

在激光器输出平均功率一定的情况下,峰值功率主要取决于调制频率和脉冲宽度。这使得脉冲宽度的调节具有一定的实际应用价值。对调Q掺铥双包层光纤激光器进行研究,首先确定了激光器的最佳输出透过率,在65%最佳透过率时,得到2 m激光的输出功率3.9 W,斜率效率为31%。外接一个信号发生器,信号门宽从12 s变化到18 s,并测量了调制频率分别在30 kHz、40 kHz和50 kHz时输出脉冲宽度的变化情况,得到了555.6 W的最高峰值功率,实现了脉冲宽度从163.4 ns到207.9 ns的变化。实验情况证实了用外接信号发生器能有效控制激光器的输出脉冲宽度。     

低损耗大模面积W型布喇格光纤

通过有限元法建立模型,讨论了布喇格光纤设计参量对光子带隙的影响,发现当增加掺锗玻璃环的厚度或折射率时,会使带隙移向长波.通过在紧邻纤芯处施加一层掺氟低折射率玻璃,设计了一种大模面积W型布喇格光纤.计算表明:W型布喇格光纤可以有效减小限制损耗,提高光纤的抗弯曲能力.本文设计的布喇格光纤的纤芯直径为30 μm,在波长1.06 μm限制损耗约为0.1 dB/km,且维持单一横模传输.     

低损耗大模面积W型布喇格光纤

通过有限元法建立模型,讨论了布喇格光纤设计参量对光子带隙的影响,发现当增加掺锗玻璃环的厚度或折射率时,会使带隙移向长波.通过在紧邻纤芯处施加一层掺氟低折射率玻璃,设计了一种大模面积W型布喇格光纤.计算表明:W型布喇格光纤可以有效减小限制损耗,提高光纤的抗弯曲能力.本文设计的布喇格光纤的纤芯直径为30 μm,在波长1.0...     

Octave-spanning visible supercontinuum generation from an aluminum nitride single crystal pumped by a 355 nm nanosecond pulse

Supercontinuum generation(SC) of more than one octave spectrum spanning covering from 400 nm to 820 nm was achieved by pumping a piece of aluminum nitride(AIN) single crystal using a nanosecond 355 nm ultraviolet laser. The AlN with a thickness of ~0.8 mm was grown by an optimized physical vapor transport technique and polished with solidification technology. Compared to previously reported ones, the achieved visible SC exhibited the broadest spectrum spanning from bulk materials pumped by a nanosecond pulse laser. The visible supercontinuum in Al N presents new opportunities for bulk material-based white light SC and may find more potential applications beyond typical applications in integrated semiconductive photoelectronic devices.