CoFe2O4／TiO2磁性复合薄膜的制备及表征

以钛酸丁酯和金属盐酸盐为原料,采用溶胶-凝胶工艺制备了CoFe2O4／TiO2复合薄膜,分析了不同热处理温度对复合薄膜晶粒生长及薄膜表面形貌的影响．通过XRD射线、拉曼光谱、扫描电子显微镜、偏光显微镜对薄膜热分解中物相变化过程及其表面形貌进行了观测,用振动样品磁强计（VSM）测定了样品的磁性．实验结果表明：溶胶-凝胶法制得的复合薄膜,两相组分晶体各自析出长大,CoFe2O4组分均匀地分布在TiO2基体中,随着热处理温度的升高,薄膜的磁性增强．     

准全向平板超材料吸波体的设计

本文设计了一种具有准全向吸波特性的平板超材料吸波体,其准全向吸波特性是由超材料吸波单元的双面吸波、极化不敏感和宽入射角实现的.理论分析和仿真结果表明:该吸波体在6.18 GHz的确有一个双面吸波的吸收点,且吸收率对极化角和入射角均不敏感.提取的等效阻抗表明可以调节超材料的电磁响应使其在吸收频率处与自由空间阻抗匹配来抑制反射.仿真的能量损耗分布表明:该吸波体对电磁波的吸收主要源于基板的介质损耗;采用两种不同介质基板的设计可使前吸波体与后吸波体的耦合度明显降低、抑制耦合所导致的传输.该吸波体可能在许多领域具有 关键词： 准全向吸波 双面吸波 极化不敏感 宽入射角     

一种极化不敏感和双面吸波的手性超材料吸波体

基于手性结构设计了一种极化不敏感和双面吸波的超材料吸波体.该吸波体的结构单元由手性结构和介质基板组成.仿真的电磁波正、反向入射时超材料吸波体的吸收率表明:该吸波结构的正、反面是互易的,具有双面吸波特性.仿真的不同极化角下超材料吸波体的吸收率表明:该超材料吸波体具有极化不敏感特性.仿真的不同入射角下超材料吸波体的吸收率表明:该超材料吸波体的入射角较窄.仿真的吸波体单元的表面电流和磁能密度分布表明:电、磁场之间存在交叉耦合,吸波与手性有关.仿真的不同损耗情况下超材料吸波体的吸收率表明:基板的介质损耗在吸波过程中起主导作用,金属的电阻热可以忽略不计.该超材料吸波体可能在要求双面吸波的领域中具有潜在的应用. 关键词： 极化不敏感 双面吸波 手性结构 超材料吸波体     

基于磁谐振器加载的宽频带超材料吸波体的设计

基于加载集总元件的磁谐振器设计了一种宽频带、极化不敏感和宽入射角的超材料吸波体.该吸波体的结构单元由加载集总元件的磁谐振器、介质基板和金属背板组成.仿真得到的加载集总元件和不加载集总元件情况下一维阵列结构吸波体的吸收率表明,相对于不加载集总元件的情况,加载集总元件的一维阵列结构吸波体能够实现宽频带吸波.仿真得到的集总电阻和集总电容取不同值时一维阵列结构吸波体的吸收率表明,集总电阻和集总电容都存在一个最佳值,此时吸波体的吸收率最高、吸收带宽最宽.仿真得到的基板有耗和无耗情况下一维阵列结构吸波体的吸收率表明, 关键词： 磁谐振器 集总元件 宽频带 超材料吸波体     

Planar Metamaterial Absorber Based on Lumped Elements

We present the design of a planar metamaterial absorber based on lumped elements, which shows a wide-band polarization-insensitive and wide-angle strong absorption. This absorber consists of metal electric resonators, the dielectric substrate, the metal film and lumped elements. The simulated absorbances under two different loss conditions indicate that high absorbance in the absorption band is mainly due to lumped resistances. The simulated absorbances under three different load conditions indicate that the local resonance circuit （lumped resistance and capacitance） could boost up the resonance of the whole RLC circuit. The simulated voltage in lumped elements indicates that the transformation efficiency from electromagnetic energy to electric energy in the absorption band is high, and electric energy is subsequently consumed by lumped resistances. This absorber may have potential applications in many military fields.     

具有极化选择特性的超材料频率选择表面的设计

基于超材料结构的设计理论,通过长金属线周期阵列和具有Lorentz谐振形式等效介电常数的金属短线的组合可频率选通特性.由不同周期排布和结构尺寸的长金属线和金属短线组合而成的频率选择表面具有不同频段的选通特性.文章提出了双层及单面两种具有极化选择特性的频率选择表面,两种结构均可实现对特定频段TE及TM波选通.具有极化选择特性的超材料频率选择表面的设计为极化滤波器以及极化波产生器的设计提供了借鉴. 关键词： 频率选择表面 超材料 极化选择     

任意多面体隐身罩材料参数的推导及验证

基于坐标变换理论推导了任意多面体隐身罩的隐身条件,并得到了相应隐身罩材料参数的张量表达式.根据导出的材料参数的张量表达式,通过全波仿真分别对正四面体和十四面体隐身罩进行仿真验证,仿真结果证实了所得材料参数张量表达式的正确性,研究结果为三维复杂形状隐身罩的设计奠定了理论研究基础. 关键词： 坐标变换 多面体隐身罩 张量表达式 全波仿真     

基于电阻膜的宽频带超材料吸波体的设计

基于电阻膜设计了一种宽频带、极化不敏感和宽入射角的超材料吸波体.该吸波体的结构单元由六边形环状电阻膜结构、介质基板和金属背板组成.仿真得到的反射率和吸收率表明,该吸波体在7.0-27.5 GHz之间对入射电磁波具有宽频带的强吸收,证实了电路谐振相对于电磁谐振易于实现宽带吸波.仿真得到的不同极化角和不同入射角下超材料吸波体的吸收率表明,该吸波体具有极化不敏感和宽入射角特性.仿真得到的基板和电阻膜对超材料吸波体吸收率的影响表明,电阻膜结构和金属背板之间形成的电容以及电阻膜结构的电阻都存在一个最佳值,此时电路谐 关键词： 电阻膜 电路谐振 宽频带 超材料吸波体     

Multiband terahertz metamaterial absorber

This paper reports the design of a multiband metamaterial (MM) absorber in the terahertz region. Theoretical and simulated results show that the absorber has four distinct and strong absorption points at 1.69, 2.76, 3.41 and 5.06 THz, which are consistent with `fingerprints' of some explosive materials. The retrieved material parameters show that the impedance of MM could be tuned to match approximately the impedance of the free space to minimise the reflectance at absorption frequencies and large power loss exists at absorption frequencies. The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector: the wave is first trapped and reinforced in certain specific locations and then consumed. This multiband absorber has applications in the detection of explosives and materials characterisation.     

A metamaterial absorber with direction-selective and polarisation-insensitive properties

This paper reports the design of a metamaterial absorber with direction-selective and polarisation-insensitive property.Both theoretical and simulated results reveal that the absorber has a distinct absorption point with direction selectivity at 7.48 GHz,which is related to the resonance of the metamaterial and is not influenced by the polarisation.The retrieved impedance indicates that the impedance of the absorber can be tuned to approximatively match the impedance of the free space on one side and not to match the impedance of the free space on the other side.This design can result in the minimal reflectance,the minimal transmission and the highest absorbance at the absorption frequency.The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector:the wave is first trapped and reinforced in certain specific locations,and then mostly consumed.The distribution of the surface current is consistent with the design,the retrieved impedance and the distribution of the power loss.This absorber may have applications in many scientific and technological areas.