低功耗聚合物Mach-Zehnder热光开关

采用传统的半导体工艺制作了聚合物Mach-Zehnder型热光开关.利用扫描电镜观测波导形貌,通过红外摄像机观测波导的近场输出光斑,在通信波段1 550 nm波长下测试了器件的输出光谱.在电极上施加直流信号,测得热光开关的消光比为－15 dB,驱动功率为16 mW.引入直流偏置网络,获得了器件的开关特性曲线,经测量开关上升时间为1.2 ms,下降时间为0.8 ms.     

基于KH560修饰的有机/无机杂化材料电光波导制备

利用溶胶-凝胶法制备了硅烷偶联剂KH560修饰的有机/无机杂化电光材料,分析了KH560的水解缩合的反应机理.对制备好的电光薄膜进行了表面形貌、折射率和电光特性的表征,并用反射法测量得出了该材料的电光系数为3.5pm/V.针对这种材料柔韧的特性,设计了上加载条形电光波导,并利用Opti-BPM软件模拟了二维和三维光场.摸索了其制备的加工工艺,制备了该结构的光波导,最后得到了这种波导的近场输出.     

EVOLUTION OF OCEANIC CRUST OF MESOZOIC TETHYS IN THE LIGHT OF TWO SUITES OF VOLCANIC ROCKS IN THE YARLUNG ZANGBO OPHIOLITE BELT

The Yarlung Zangbo ophiolite represents the ocean crustal residue of the Mesozoic Tethys. In this ophiolite belt, there are two suites of volcanic sequences. One is Late Jurassic-Early Cretaceous metabasalts, and the other is Early Cretaceous pillow basalts. These two suites of volcanic rocks are significantly different in time and space patterns and geochemistry. Based on an investigation on their geochemical characteristics, the authors would have a discussion on the two stages of the ocean crustal evolution of the Mesozoic Tethys.The evolution of the Mesozoic Tethys went through three stages, namely the early rift valley, the intermediate ocean crustal development and the last closing stage. The development of oceanic crust experienced the early discontinuous spreading stage which formed the metabasalt and the late continuous spreading stage which produced the Early Cretaceous oceanic crust.     

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly(methyl methacrylate)(PMMA) materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.     

The 650-nm variable optical attenuator based on polymer/silica hybrid waveguide

Visible light variable optical attenuators(VOA) are essential devices in the application of channel power regulation and equalization in wavelength-division multiplexing cross-connect nodes in plastic optical fiber(POF) transmission systems.In this paper, a polymer/silica hybrid waveguide thermo–optic attenuator based on multimode interference(MMI) coupler is designed and fabricated to operate at 650 nm. The single-mode transmission condition, MMI coupler, and transition taper dimensions are optimized through the beam propagation method. Thermal analysis based on material properties provides the optimized heater placement angle. The fabricated VOA presents an attenuation of 26.5 dB with a 21-mW electrical input power at 650 nm. The rise time and fall time are 51.99 and 192 μs, respectively. The time–stability measurement results prove its working reliability.     

从雅鲁藏布江蛇绿岩带中的两套火山岩探讨中生代特提斯洋壳的演化

雅鲁藏布江蛇绿岩代表中生代特提斯的洋壳残余,其中包括两套火山岩:一套为晚侏罗—早白垩世的变玄武岩;另一套为早白垩世的枕状玄武岩。两套火山岩具有不同的时空格局和明显的地球化学差异。通过对两套火山岩的地球化学研究,讨论了中生代特提斯洋壳演化的两个阶段。中生代特提斯的演化经历了早期裂谷阶段、中期洋壳发育阶段以及末期闭合阶段。洋壳的演化包括早期的不连续扩张阶段,形成了变玄武岩和晚期的扩张阶段,发育了枕状玄武岩。     

紫外胶在聚合物准矩形电光波导中的应用

基于聚合物材料的波导型电光器件对提升光通信网络的带宽容量具有重要的意义。设计并制备了一种基于有机/无机杂化非线性材料的准矩形聚合物电光波导,采用SiO2作为下包层,紫外胶SU-8作为引导芯层,掺有生色团DR1的有机/无机杂化非线性材料DR1/SiO2-TiO2作为电光层,通过优化感应耦合等离子体刻蚀工艺的天线功率、偏置功率和氧气流量,将SU-8同时作为引导芯层和刻蚀工艺的掩模,制备了准矩形电光波导。实验测得波导传输损耗为-3.5 dB/cm。     

基于Norland紫外固化胶的热光开关器件

采用新型聚合物材料Norland紫外固化胶（NOA）制备了聚合物M-Z型热光开关器件。对NOA薄膜材料的光学性质进行了表征,采用感应耦合等离子体（ICP）方法制备出形貌良好的波导器件。测得在1 550 nm波长下,长2.2 cm的直波导插入损耗为8.3 dB。在电极上施加直流信号,测得热光开关的消光比为11 dB,驱动功率为85 mW。引入直流偏置网络,获得了器件的开关特性曲线,测得开关器件的上升时间为1.085 ms,下降时间为489.5μs。实验结果表明：NOA材料在热光开关及其它聚合物光波导集成器件的制备中具有很大的应用潜力。     

低功耗聚合物Mach-Zehnder热光开关

采用传统的半导体工艺制作了聚合物Mach-Zehnder型热光开关.利用扫描电镜观测波导形貌,通过红外摄像机观测波导的近场输出光斑,在通信波段1550nm波长下测试了器件的输出光谱.在电极上施加直流信号,测得热光开关的消光比为-15dB,驱动功率为16mW.引入直流偏置网络,获得了器件的开关特性曲线,经测量开关上升时间为1.2ms,下降时间为0.8ms.     

制备工艺对掺杂NaYF4:Er3+,Yb3+发光纳米晶的聚合物光波导放大器性能的影响

制备了NaYF₄：Er³⁺,Yb³⁺纳米晶,表征了纳米晶的形貌,通过物理掺杂的方式将纳米粒子掺杂到SU-8中作为光波导放大器的芯层材料,优化了波导放大器的尺寸,利用旋涂、刻蚀等工艺,在二氧化硅衬底上制备了光波导放大器。实验中用光漂白法和湿法刻蚀两种方法制备光波导放大器,分别给出了两种方法制备的器件的结构、工艺流程、光场模拟结果,并对两种方法制备的器件的放大特性进行了测试。测试结果表明,当980 nm波长的泵浦光功率为241 mW且1 550 nm波长的信号光功率为0.1 mW时,使用湿法刻蚀法制备的放大器得到2.7 dB的相对增益。当980 nm波长的泵浦光功率为235 mW且1 550 nm波长的信号光功率为0.1 mW时,使用光漂白法制备的放大器得到4.5 dB的相对增益。根据以上测试结果,分析了两种工艺对器件性能的影响。