Highly efficient single longitudinal mode-pulsed green laser

A novel design for a highly efficient 1-kHz single-frequency green laser is proposed.An efficient singlefrequency laser pulse output at 532-nm wavelength may be obtained by combining the injection seeding with intracavity frequency doubling in a compact U-shaped cavity formed by two plano dichroic mirrors in an end-pumping arrangement.The laser is capable of producing green pulses with a total energy of 6.3 mJ at a pulse repetition rate of 1 kHz.The pulse width is about 10 ns and the optical-optical efficiency from the 808-nm pump source to the 532-nm green output is around 12.7%.     

Single-frequency high-energy Yb-doped pulsed all-fiber laser

A single-frequency pulsed all-fiber laser with a master oscillator power amplifier configuration is presented. While maintaining the properties of single mode, linear polarization, and narrow linewidth, a single-pulse energy of 260 μJ and over 500-W peak power is experimentally demonstrated at 1 kHz by employing tensile strain gradient and pulse-shape control methods. In addition, approximately 55 dB of optical signal to noise ratio is also achieved.     

1.8 mJ高倍率Nd:YAG板条皮秒激光放大器

设计了一种高倍率的固体皮秒脉冲激光放大器,采用Nd:YAG板条作为激光增益介质。借助板条结构的角度选通结构,搭建了板条五通放大系统,实现了对注入皮秒脉冲激光的高倍率放大。种子源工作在脉冲模式,放大器泵浦源在连续模式工作。皮秒光纤激光器可以在不同的重复频率下工作,脉冲宽度为13.4 ps。种子光经过隔离和耦合系统之后,注入板条的单脉冲能量为25 nJ。当种子源工作重复频率为24.46 MHz时,板条放大器输出平均功率377 W,单脉冲能量15.5 μJ;当种子源工作重复频率为49.8 kHz时,板条放大器输出平均功率89 W,单脉冲能量1.8 mJ,峰值功率为134 MW,放大倍率达到7.2×104。     

二极管泵浦高能激光研究进展和展望

高能激光广泛应用于材料加工、科学研究、空间碎片清除、军事应用等领域。二极管泵浦高能激光具有结构紧凑,系统简单、全电驱无限弹仓的特点,近年来,各类二极管泵浦高能激光围绕着同时实现高功率、高效率、高光束质量这一总目标发展迅速。详细综述了国内外高平均功率块状固体激光、高功率可见光波段激光、高峰值功率激光、高功率光纤激光、碱金属蒸气激光等二极管泵浦高能激光的研究进展,并对其发展趋势进行了展望。     

高效紧凑室温Yb:YAG板条全固态激光技术研究

报道了高效紧凑室温Yb:YAG板条全固态激光研究进展。建立了室温Yb板条激光动力学模型,分析了泵浦激光通量和注入激光亮度与光光效率的关系,以及板条边缘效应抑制方法。实验获得了输出功率22.3 kW、光光效率36%和光束质量优于2.4倍衍射极限的激光输出,为更高功率的Yb板条激光关键技术研究及开发小型化、轻量化、实用化的高功率激光器奠定了基础。     

高功率平面波导激光器研究进展及分析

平面波导激光器的激光介质既能实现大模体积运转,又在一维方向起到波导作用从而获得高光束质量激光输出,近年来成为高平均功率固体激光器的重要研究方向之一。对国内外平面波导激光器的研究进展进行了归纳总结,对比和分析了平面波导的双包层波导结构、梯形波导结构和自成像结构等结构特点,分析了平面波导结构的发展及趋势,并提出了平面波导激光器发展成为高功率激光器的一些限制因素。     

Conductively cooled 1-kHz single-frequency Nd:YAG laser for remote sensing

A conductively cooled,laser diode(LD) end-pumped,injection-seeded single-frequency Nd:YAG laser is designed and implemented.The laser is capable of producing an 8-mJ Q-switched pulse with a 11-ns pulse width at 1 064 nm and at a pulse repetition rate of 1 000 Hz.At the maximum output energy of 8 mJ,the frequency jitter is less than 3.5 MHz(root mean square(RMS)) over two minutes,and the linewidth is around 54.2 MHz.The M2 of the laser beam is approximately 1.30 in both horizontal and vertical directions.The optimized ramp-fire technique is applied to build reliable single longitudinal mode oscillating.     

Conductively cooled 250-Hz single frequency Nd：YAG laser

A conductively cooled, laser diode （LD） end-pumped, injection-seeded single frequency Nd：YAG laser is designed and impleinented. The laser utilizes Nd：YAG rod as gain medium and compact dual-endpumping arrangement using two fiber-coupled LDs with a maximum output of 150 W. The optimized ramp-fire technique is applied to build reliable single longitudinal mode oscillating. The laser is capable of producing a 10-raJ Q-switched pulse with 13-ns pulse width at 1064 nm at a pulse repetition rate of 250 Hz. The output beam qualities M2 of approximately 1.19 and 1.22 in horizontal and vertical directions are detected, respectively.     

Efficient and compact diode-end-pumped conductively cooled Q-switched Nd:YLF laser operating at 527 nm

A novel, compact diode-end-pumped conductively cooled Q-switched Nd:YLF laser is developed. A diode-end-pumped pair of Nd:YLF slabs and an intracavity-frequency-doubled configuration are adopted to increase conversion efficiency. Using 49.8-mJ incident pump pulse energy at 500-Hz repetition rate, the laser obtains 11-mJ pulse energy and 5.5-W average output power at 527-nm wavelength, achieving an optical-optical conversion efficiency of 22%. The pulsewidth is less than 15 ns, and the beam quality factors are Mx2=1.28 and M y2=1.12.