Enhancing low-field magnetoresistance of La0.67Ca0.33MnO3 films deposited on anodized aluminium-oxide membranes

In this paper we report a new method to fabricate nanostructured films, La0.67Ca0.33MnO3 （LCMO） nanostructured films have been fabricated by using pulsed electron beam deposition （PED） on anodized aluminium oxide （AAO） membranes, The magnetic and electronic transport properties are investigated by using the Quantum Design physics properties measurement system （PPMS） and magnetic properties measurement system （MPMS）. The resistance peak temperature （Tp） is about 85 K and the Curie temperature （To） is about 250 K for the LCMO film on an AAO membrane with a pore diameter of 20nm. Large magnetoresistance ratio （MR） is observed near Tp. The MR is as high as 85% under 1 T magnetic field. The great enhancement of MR at low magnetic fields could be attributed to the lattice distortion and the grain boundary that are induced by the nanopores on the AAO membrane.     

Fabrication and Characterization of YBa2Cu3Oy Superconducting Nanowires

Ordered YBa2Cu3Oy nanowires have been fabricated by filling YBa2Cu3Oy melting liquid into the pores of the anodized alumina templates. X-ray powder diffraction proves that YBa2Cu3Oy nanowires crystallized in the Y-123 structure. The temperature dependence of ac susceptibility indicates a superconducting transition at 91 K for the YBa2Cu3Oy nanowire array.     

PED沉积La-Sr-Cu-O薄膜表面的有序纳米结构

采用脉冲电子束沉积(PED)技术在Si(100)衬底上生长La_Sr_Cu_O薄膜，在750℃生长温度下获得具有有序纳米结构的表面形貌.采用聚集离子束(FIB)技术对获得的纳米结构进行表征，结果表明，这种有序的纳米结构是由于Si衬底和La_Sr_Cu_O薄膜之间的热膨胀系数和晶格的 失配引起的纳米裂纹.在这些纳米裂纹处，La_Sr_Cu_O成核生长获得独立的纳米线.通过控制 这种有序的纳米结构的生长，这种有序的纳米结构可以用来构造弱连接形成的器件. 关键词： 脉冲电子束沉积 La_Sr_Cu_O薄膜 纳米结构     

晶界对庞磁电阻颗粒薄膜的磁学和输运性能的影响

采用脉冲电子束沉积技术，在Si(100)单晶衬底上沉积庞磁电阻La_0.67Ca_0.33MnO₃颗粒薄膜，并对它的磁学性能和电学输运性能进行了表征.研究晶界对庞磁电阻薄膜的物理性能的影响，结果表明，晶界的存在使得晶粒之间的耦合变弱，在变温磁化过程中表现出团簇玻璃态行为，金属—绝缘体转变温度(T_p)远远低于铁磁—顺磁转变温度(T_c).低温下电子输运具有弱局域化行为.在低磁场下，晶界的存在掩盖了La_0.67Ca_0.33MnO₃的本征磁电阻行为. 关键词： 脉冲电子束沉积 晶界 磁学和电学输运性能 庞磁电阻     

Electronic and luminescent properties of Cr-doped cadmium sulfide nanowires

Cr-doped CdS nanowires were synthesized in large scale through thermal co-evaporation of CdS and metal Cr powders. General morphology, detailed microstructure and optical properties were characterized using various techniques. Devices consisting of individual Cr-doped CdS nanowire were fabricated and they exhibited remarkable rectifying characteristics. I-V curves of individual Cr-doped CdS nanowire devices demonstrate that the present nanowires are n-type doped and have high conductivity (10.96 \Omega ^-1cm^-1, indicating great potential applications in nanoscale electronic and optoelectronic devices.