Numerical analysis of a dual-pass pumping laser with weak absorption

A model for a laser with dual-pass pumping is established, and an equation expressing the mode matching for this structure is presented. Through the numerical analysis of this equation, under the conditions of weak-absorption and effective absorption efficiency, the optimum radius of the pump beam waist as well as the optimum location is fitted to simple formulas, considering the quality of the pump beam, absorption coefficient, and beam waist of the cavity mode.Using these formulas, the laser with dual-pass pumping could be optimized to obtain a high slope efficiency. To test the utility of this model, an Nd:YVO_4 laser with dual-pass pumping and weak-absorption was built and optimized according to the results of the calculation. A good agreement between the results of the calculations and the experiment verified the model and the numerical analysis.     

516 mW,nanosecond Nd:LuAG laser Q-switched by gold nanorods

Q-switched operation of an Nd:LuAG laser using gold nanorods(GNRs) as the saturable absorber(SA) is reported, which also produces the highest average power among the nanosecond Nd-doped Q-switched lasers by GNRs-based SA. The applied GNRs are prepared using a seed-mediated growth method and then dropped onto the quartz substrate to fabricate the SA. The average power of the Q-switched laser is 516 mW with the shortest pulse duration of 606.7 ns and the repetition rate of 265.1 kHz.     

980-nm all-fiber mode-locked Yb-doped phosphate fiber oscillator based on semiconductor saturable absorber mirror and its amplifier

A 980-nm semiconductor saturable absorber mirror(SESAM) mode-locked Yb-doped phosphate fiber laser is demonstrated by using an all-fiber linear cavity configuration. Two different kinds of cavity lengths are introduced into the oscillator to obtain a robust and stable mode-locked seed source. When the cavity length is chosen to be 6 m, the oscillator generates an average output power of 3.5 m W and a pulse width of 76.27 ps with a repetition rate of 17.08 MHz. As the cavity length is optimized to short, 4.4-m W maximum output power and 61.15-ps pulse width are produced at a repetition rate of 20.96 MHz. The output spectrum is centered at 980 nm with a narrow spectral bandwidth of 0.13 nm. In the experiment, no undesired amplified spontaneous emission(ASE) nor harmful oscillation around 1030 nm is observed. Moreover,through a two-stage all-fiber-integrated amplifier, an output power of 740 m W is generated with a pulse width of 200 ps.